References
- Mickley HS, Davis RS. Momentum transfer for flow over a flat plate with blowing. NASA; 1957. (TN-4017).
- Rubesin MW. An analytical estimation of the effect of transpiration cooling on the heat-transfer and skin-friction characteristics of a compressible, turbulent boundary layer. NASA; 1974. (TN-3341).
- Stevenson TN. Turbulent boundary layers with transpiration. AIAA J. 1964 Aug;2(8):1500–1502. doi:10.2514/3.2595
- Tennekes H. Similarity laws for turbulent boundary layers with suction or injection. J Fluid Mech. 1965 Apr;21(4):689. doi:10.1017/s0022112065000423
- Moffat RJ, Kays WM. The turbulent boundary layer on a porous plate: experimental heat transfer with uniform blowing and suction. Int J Heat Mass Transf. 1968 Oct;11(10):1547–1566. doi:10.1016/0017-9310(68)90116-6
- Bradshaw P. Mixing-length velocity profile in boundary layers with transpiration. AIAA J. 1967 Sep;5(9):1674–1675. doi:10.2514/3.4267
- Jeromin LOF. A transformation for compressible turbulent boundary layers with air injection. J Fluid Mech. 1968 Jan;31(01):65. doi:10.1017/s0022112068000042
- Squire LC. A law of the wall for compressible turbulent boundary layers with air injection. J Fluid Mech. 1969 Jul;37(3):449. doi:10.1017/s0022112069000656
- Simpson RL. Characteristics of turbulent boundary layers at low reynolds numbers with and without transpiration. J Fluid Mech. 1970 Jul;42(4):769. doi:10.1017/s002211207000160x
- Julien HL, Kays WM, Moffat RJ. Experimental hydrodynamics of the accelerated turbulent boundary layer with and without mass injection. J Heat Transfer. 1971;93(4):373. doi:10.1115/1.3449833
- Kays WM. Heat transfer to the transpired turbulent boundary layer. Int J Heat Mass Transf. 1972 May;15(5):1023–1044. doi:10.1016/0017-9310(72)90237-2
- Baker RJ, Launder BE. The turbulent boundary layer with foreign gas injection —i. Measurements in zero pressure gradient. Int J Heat Mass Trans. 1974 Feb;17(2):275–291. doi:10.1016/0017-9310(74)90089-1
- Andersen PS, Kays WM, Moffat RJ. Experimental results for the transpired turbulent boundary layer in an adverse pressure gradient. J Fluid Mech. 1975 May;69(2):353. doi:10.1017/s0022112075001474
- Vigdorovich I. Velocity, temperature, and reynolds-stress scaling in the wall region of turbulent boundary layer on a permeable surface. J Experimental Theor Phys. 2004 Nov;99(5):1028–1038. doi:10.1134/1.1842884
- Black T, Sarnecki A, Britain ARCG. The turbulent boundary layer with suction or injection. H.M. Stationery Office; 1965. Aeronautical Research Council; reports and memoranda. Available from: https://books.google.fr/books?id=bvyicQAACAAJ
- Stevenson TN. Inner region of transpired turbulent boundary layers. AIAA J. 1968 Mar;6(3):553–554. doi:10.2514/3.4539
- Simpson R, Whitten D, Moffat R. An experimental study of the turbulent Prandtl number of air with injection and suction. Int J Heat Mass Transf. 1970 Jan;13(1):125–143. doi:10.1016/0017-9310(70)90030-x
- Vigdorovich I. A law of the wall for turbulent boundary layers with suction:stevenson's formula revisited. Phys Fluids. 2016 Aug;28(8):085102. doi:10.1063/1.4960182
- Stevenson TN. A law of the wall for turbulent boundary layers with suction or injection. Cranfield College of Aeronautics; 1963.
- Andersen PS, Kays WM, Moffat RJ. The turbulent boundary layer on a porous plate: an experimental study of the fluid mechanics for adverse free stream pressure gradients. NASA; 1972. (HMT-15).
- Kays WM. Heat transfer to the transpired turbulent boundary layer; 1971. HMT-14.
- Baker RJ, Launder BE. The turbulent boundary layer with foreign gas injection – II. Predictions and measurements in severe streamwise pressure gradients. Int J Heat Mass Transf. 1974 Feb;17(2):293–306. doi:10.1016/0017-9310(74)90090-8
- Cebeci T, Smith A. Analysis of turbulent boundary layers. Applied mathematics and mechanics. Vol. 15. Academic Press, New-York; 1974.
- Wilcox D. Reassessment of the scale-determining equation for advanced turbulence models. AIAA J. 1988 Nov;26(11):1299–1310. doi: 10.2514/3.10041
- Wilcox D. Formulation of the k−ω turbulence model revisited. AIAA J. 2008 Nov;46(11):2823–2838. doi: 10.2514/1.36541
- Bellettre J, Bataille F, Lallemand A. A new approach for the study of turbulent boundarylayers with blowing. Int J Heat Mass Transf. 1999 Aug;42(15):2905–2920. doi:10.1016/s0017-9310(98)00341-x
- Hink R, Hannemann V, Eggers T. Extension of the Spalart-Allmaras one-equation turbulence model for effusion cooling problems. In: Deutscher Luft- und Raumfahrtkongress 2013; September 2013. Available from: https://elib.dlr.de/84638/
- Spalart P, Allmaras S. A one-equation turbulence model for aerodynamic flows. La Recherche Aérospatiale. 1994;1:5–21.
- Aupoix B, Spalart P. Extensions of the Spalart–Allmaras turbulence model to account for wall roughness. Int J Heat Fluid Flows. 2003;24:454–462. doi: 10.1016/S0142-727X(03)00043-2
- Menter F. Two-equation eddy-viscosity turbulence models for engineering applications. AIAA J. 1994 Aug;32(8):1598–1605. doi: 10.2514/3.12149
- Cebeci T, Smith A, Mosinskis G. Calculation of compressible adiabatic turbulent boundary layers. AIAA J. 1970 Nov;8(11):1974–1982. doi: 10.2514/3.6034
- Bradshaw P, Ferriss D, Atwell N. Calculation of boundary-layer development using the turbulent energy equation. J Fluid Mech. 1967;28(3):593–616. doi: 10.1017/S0022112067002319
- Aupoix B. Clicet – version 2015 descriptif et mode d'emploi. ONERA; 2015. (Rapport Technique 1/24088 DMAE).
- Aupoix B. A general strategy to extend turbulence models to rough surfaces – application to Smith's k−l model. J Fluid Engin. 2007 Oct;129(10):1245–1254. doi: 10.1115/1.2776960
- Aupoix B. Roughness corrections for the k−ω shear stress transport model: status and proposals. J Fluids Eng. 2015 Feb;137:021202. doi: 10.1115/1.4028122
- Aupoix B. Improved heat transfer predictions on rough surfaces. Int J Heat Fluid Flows. 2015 Dec;56:160–171. doi: 10.1016/j.ijheatfluidflow.2015.07.007
- Ferro M. Experimental study on turbulent boundary-layer flows with wall transpiration [dissertation]. Stockholm: Royal Institute of Technology; 2017.
- Ferro M, Bengt F, Fransson J. On the scaling of turbulent asymptotic suction boundary layers. In: 10th International Symposium on Turbulence and Shear Flow Phenomena, TSFP17; 2017 Jul.
- Lehmkuhl J, Kelm S, Bucci M, et al. Improvement of wall condensation modeling with suction wall functions for containment application. Nuclear Engin Design. 2016;299:105–111. doi: 10.1016/j.nucengdes.2015.08.002