Austenite grain growth simulation considering the solute-drag effect and pinning effect

References

• Cochrane RC. Weld metal microstructures-a state of the review. Welding in the World. 1983;21:16–24.
   Google Scholar
• Tweed JH, Knott JF. Micromechanisms of failure in C-Mn weld metals. Acta metall. 1987;35:1401–1414.10.1016/0001-6160(87)90087-3
   Google Scholar
• Ameyama K, Minagawa M, Maki T, et al. Morphology of proeutectoid ferrite at austenite grain boundaries. Tetsu-to-hagané. 1988;74:1839–1845.
   Web of Science ®Google Scholar
• Mori N, Homma H, Wakabayashi M, et al. Mechanical properties of Ti-B containing weld metals. J Jpn Weld Soc. 1981;50:786–793.10.2207/qjjws1943.50.786
   Google Scholar
• Watanabe I, Kojima T. Effects of titanium, boron and oxygen on notch toughness. J Jpn Weld Soc. 1980;52:773–780.
   Google Scholar
• Mills AR, Thewlis G, Whiteman JA. Nature of inclusions in steel weld metals and their influence on formation of acicular ferrite. Mater Sci Technol. 1987;3:1051–1061.10.1179/mst.1987.3.12.1051
   Web of Science ®Google Scholar
• Thewlis G. Transformation kinetics of ferrous weld metals. Mater Sci Technol. 1994;10:110–125.10.1179/mst.1994.10.2.110
   Web of Science ®Google Scholar
• Grong Ø, Klulen AO, Nylund HK, et al. Catalyst effects in heterogeneous nucleation of acicular ferrite. Metall Trans A. 1995;26A:525–534.10.1007/BF02663903
   Web of Science ®Google Scholar
• Byun JS, Shim JH, Suh JY, et al. Inoculated acicular ferrite microstructure and mechanical properties. Mater Sci Eng A. 2001;319–321:326–331.10.1016/S0921-5093(00)02014-1
   Web of Science ®Google Scholar
• Imagunbai M, Chijiiwa R, Aikawa N, et al., Advanced steels for low-temperature service. HSLA Steels’85. 1985:557–566.
   Google Scholar
• Chijiiwa R, Tamehiro H, Hirai M, et al. Extra high toughness titanium-oxide steel plates for offshore structures and line pipe. Proceeding of the 7th Int. Conf. OMAE; Houston: ASME; 1988. 165–172.
   Google Scholar
• Yamamoto K, Matsuda S, Haze T, et al. A newly developed Ti-oxide bearing steel having high HAZ toughness, residual and unspecified elements in steels. ASTEM STP1042. 1989;266–284.
   Google Scholar
• Yamamoto K, Hasegawa T, Takamura J. Effect of B on the intra-granular ferrite formation in Ti-oxides bearing steels. Tetsu-to-hagané. 1993;79:1169–1175.
   Web of Science ®Google Scholar
• Tomita Y, Tsuzuki T, Tokunaga Y, et al. Improvement in HAZ toughness of steel by TiN-MnS addition. ISIJ Int. 1994;34:829–835.10.2355/isijinternational.34.829
   Web of Science ®Google Scholar
• Kanazawa S, Nakashima A, Okamoto K, et al. Improved toughness of weld fusion zone by fine TiN particles and development of a steel for large heat input welding. Tetsu-to-hagané. 1975;61:2589–2603.
   Google Scholar
• Nakanishi M, Komizo Y, Seta I. Improvement of welded HAZ toughness by dispersion with nitride particles and oxide particles. Q J Jpn Weld Soc. 1983;52:117–124.10.2207/qjjws1943.52.117
   Google Scholar
• Kasamatsu Y, Takashima S, Hosoya T. Effect of titanium and nitrogen on toughness of heat-affected zone of steel plate tensile strength of 50 kg/mm2 in high heat input welding. Tetsu-to-hagané. 1979;65:1232–1241.
   Google Scholar
• Rak I, Gliha V, Koçak M. Weldability and toughness assessment of Ti-microalloyed offshore steel. Metall Mater Trans A. 1997;28A:199–206.10.1007/s11661-997-0096-4
   Web of Science ®Google Scholar
• Deshimaru S, Hirai I, Amano K, et al. Production of heavy thickness steel plates for arctic use suitable for high-heat input welding. Kawasaki Steel Tech Rep. 1996;18:295–300.
   Google Scholar
• Kojima A, Kiyose A, Uemori R, et al. Super high HAZ toughness technology with fine microstructure imparted by fine particles. Nippon Steel Tech Rep. 2004;90:1–6.
   Google Scholar
• Burke JE, Turnbull D. Recrystallization and grain growth. Progress in metal physics. 1952; 3:220–292.
   Google Scholar
• Lücke K, Detert K. A quantitative theory of grain-boundary motion and recrystallization in metals in the presence of impurities. Acta Met. 1957;5:628–637.10.1016/0001-6160(57)90109-8
   Google Scholar
• Cahn JW. The impurity-drag effect in grain boundary motion. Acta Met. 1962;10:789–798.10.1016/0001-6160(62)90092-5
   Google Scholar
• Hillert M, Sundman B. A treatment of the solute drag on moving grain boundaries and phase interfaces in binary alloys. Acta Met. 1976;24:731–743.10.1016/0001-6160(76)90108-5
   Google Scholar
• Purdy GR, Brechet YJM. A solute drag treatment of the effects of alloying elements on the rate of the proeutectoid ferrite transformation in steels. Acta Met. 1995;43:3763–3774.10.1016/0956-7151(95)90160-4
   Google Scholar
• Turbull D. Theory of grain boundary migration rates. Trans ASME. 1951;191:661–665.
   Google Scholar
• Nishizawa T. Grain growth in single- and dual- phase steels. Tetsu-to-hagané. 1984;70:1984–1992.
   Web of Science ®Google Scholar
• Hillert M. The mechanism of phase transformation in crystalline solids. Inst Met. 1968;231–247.
   Google Scholar
• Smith CS. Grains, phase, and interfaces: an interpretation of microstructure. Trans AIME. 1948;175:15–51.
   Google Scholar
• Nishizawa T, Ohnuma I, Ishida K. Examination of the zener relationship between grain size and particle dispersion. Mat Trans JIM. 1997;38:950–956.10.2320/matertrans1989.38.950
   Web of Science ®Google Scholar
• Gladman T. On the theory of the effect precipitate on grain growth in metals. Proc Roy Soc. 1966;A294:298–309.10.1098/rspa.1966.0208
   Google Scholar
• Hillert M. Inhibition of grain growth by second-phase particles. Acta Metal. 1988;36:3177–3181.10.1016/0001-6160(88)90053-3
   Google Scholar
• Hunderi O, Ryum N. The interaction between spherical particles and triple lines and quadruple points. Acta Metal Mater. 1992;40:543–549.10.1016/0956-7151(92)90403-2
   Google Scholar
• Srolovitz DJ, Anderson MP, Grest GS, et al. Computer simulation of grain growth-Ⅲ. Influence of a particle dispersion. Acta Metall. 1984;32:1429–1438.10.1016/0001-6160(84)90089-0
   Google Scholar
• Anderson MP, Grest GS, Doherty RD, et al. Inhibition of grain growth by second phase particles: three dimensional Monte Carlo computer simulations. Scripta Metal. 1989;23:753–758.10.1016/0036-9748(89)90525-5
   Google Scholar
• Nishizawa T. Thermodynamics of micro-alloying. Mater Trans. 2001;42:2027–2032.10.2320/matertrans.42.2027
   Web of Science ®Google Scholar
• Hillert M. On the theory of normal and abnormal grain growth. Acta Metall. 1965;13:227–238.10.1016/0001-6160(65)90200-2
   Google Scholar
• Hillert M. The Use of Gibbs Free Energy-Composition. In: Aaronson HI, editor. Lectures on the theory of phase transformations. Pennsylvania: The Metallurgical Society of AIME; 1975. P. 36–43.
   Google Scholar
• Rabbe D. Computational materials science. Weinheim: Wiley-VCH; 1988.
   Google Scholar
• Steinbach I, Pezzolla F, Nestler B, et al. A phase field concept for multiphase systems. Phys D. 1996;94:135–147.10.1016/0167-2789(95)00298-7
   Web of Science ®Google Scholar
• Eiken J, Böttger B, Steinbach I, Multiphase-field approach for multicomponent alloys with extrapolation scheme for numerical application. Phys Rev E. 2006;73: 066122-1–066122-9.
   Web of Science ®Google Scholar
• MICRESS®. [cited 2015 Jun 17]. Available from: http://www.micress.de
   Google Scholar
• Fujiyama N, Nishibata T, Hirata, H, et al. Analysis of γ grain growth behavior with TiN dissolution. Q J Jpn Weld Soc Preprints of the National Meeting of the Japan Welding Society. 2013;93:176–177.
   Google Scholar