Clinching for sheet materials

References

• He X, Gu F, Ball A. A review of numerical analysis of friction stir welding. Prog Mater Sci. 2014;65:1–66.10.1016/j.pmatsci.2014.03.003
   Web of Science ®Google Scholar
• He X, Gu F, Ball A. Recent development in finite element analysis of self-piercing riveted joints. Int J Adv Manuf Technol. 2012;58:643–649.10.1007/s00170-011-3414-3
   Web of Science ®Google Scholar
• He X. Finite element analysis of laser welding: a state of art review. Mater Manuf Process. 2012;27:1354–1365.10.1080/10426914.2012.709345
   Web of Science ®Google Scholar
• He X. A review of finite element analysis of adhesively bonded joints. Int J Adhe Adhe. 2011;31:248–264.10.1016/j.ijadhadh.2011.01.006
   Web of Science ®Google Scholar
• He X, Pearson I, Young K. Self-pierce riveting for sheet materials: state of the art. J Mater Process Technol. 2008;199:27–36.10.1016/j.jmatprotec.2007.10.071
   Web of Science ®Google Scholar
• Mori K, Bay N, Fratini L, et al. Joining by plastic deformation. CIRP Annals – Manufact Technol. 2013;62(2):673-694.10.1016/j.cirp.2013.05.004
   Web of Science ®Google Scholar
• Groche P, Wohletz S, Brenneis M, et al. Joining by forming - a review on joint mechanisms, applications and future trends. J Mater Process Technol. 2014;214(10):1972–1994.10.1016/j.jmatprotec.2013.12.022
   Web of Science ®Google Scholar
• Carboni M, Beretta S, Monno M. Fatigue behavior of tensile-shear loaded clinched joints. Eng Fract Mech. 2006;73(2):178–190.10.1016/j.engfracmech.2005.04.004
   Web of Science ®Google Scholar
• Calabrese L, Galtieri G, Borsellino C, et al. Durability of hybrid clinch-bonded steel/aluminum joints in salt spray environment. Int J Adv Manuf Technol. 2016;87(9–12):3137–3147.10.1007/s00170-016-8701-6
   Web of Science ®Google Scholar
• Zhang Y, He X, Zeng K, et al. Influence of heat treatment on mechanical properties of clinched joints in titanium alloy sheets. Int J Adv Manuf Technol. Forthcoming.
   Web of Science ®Google Scholar
• Eshtayeh MM, Hrairi M, Mohiuddin AKM. Clinching process for joining dissimilar materials: state of the art. Int J Adv Manuf Technol. 2016;82(1–4):179–195.10.1007/s00170-015-7363-0
   Web of Science ®Google Scholar
• Thies L. “Blechverbindung”. Deutsches Reichspatent, DRP-No.98517. 1897.
   Google Scholar
• Dingfeld G. Fastening engineering. 25 Years of clinch technology - a process has shaped up nicely. Konstruktion. 2006;10:47–49.
   Google Scholar
• Yates A. Ford automates car door manufacture. J Inst Eng Australia. 1987;59(22):16–17.
   Google Scholar
• Yotsuya G, Yamauchi R. Lightening approach for small vehicles by developing extruded aluminum suspension arm. SAE Int J Mater Manufact. 2013;6(1):124–130.
   Google Scholar
• Hennings J, Maier J. Properties of clinch joints in aluminum sheet compared with resistance spot welds. Aluminium Dusseldorf. 1983;59(5):358–363.
   Google Scholar
• Lin P, Anzai E. Evaluation of joint strength of clinched joints. J Light Metal Weld Construct. 2013;51(4):13–19. Japanese.
   Google Scholar
• Rimašauskas M, Bargelis A. Framework of consideration productivity for assembling operations in sheet metalworking. Mechanika. 2005;55(5):51–55.
   Google Scholar
• Wen T, Huang Q, Liu Q, et al. Joining different metallic sheets without protrusion by flat hole clinching process. Int J Adv Manuf Technol. 2016;85(1–4):217–225.10.1007/s00170-015-7936-y
   Web of Science ®Google Scholar
• Rapp E. Fast and positive sheet metal joining. Werkstatt und Betrieb. 1989;122(5):381–383.
   Google Scholar
• Liebig HP, Bober J, Beyer R. Connecting sheet metal by press joining. Bänder Bleche Rohre. 1984;25(9):240–244.
   Google Scholar
• Facklam T, Liebig HP. Schutzleiterverbindung in Druckfügetechnik. Sonderdruckausetz. 1988; Bd.109 H.24:1126-1130.
   Google Scholar
• Liebig HP. Press joining in sheet metal. British Eng. 1987;27:27–33.
   Google Scholar
• Liebig HP, Sack P. Flat clinching process produces joints flush with the metal sheet. Bänder Bleche Rohre. 1994;35(9):92–94.
   Google Scholar
• Liebig HP, Bober J. FertigungstechnischeAspekte des Druckfügens. Bänder Bleche Rohre. 1996;4:28–37.
   Google Scholar
• Hahn O, Budde L. Fügendurch Umformenmit und ohne Hilfsfügeteil. Wiederstandsschweissen. 1989; DVS-Berichte Band 124:32-36.
   Google Scholar
• Hahn O, Budde L. Analyse und systematische Einteilungumformtechnischer Fügeverfahrenohne Hilfsfügeteil. Blech Rohre Profile. 1990;37(1):29–32.
   Google Scholar
• Hahn O, Boldt M. Durchsetzfüge- und Punktschweissverbindungenunterquasistatischer und dynasmischer Beanspruchung. Blech Rohre Profile. 1992;39:211–219.
   Google Scholar
• Klasfauseweh U, Hahn O. Numerische Simulation nichtschneidender Durchsetzfügevorgänge. Blech Rohre Profile. 1994;41(5):328–333.
   Google Scholar
• Hahn O, Kurzok JR, Rohde A. Tolerable cutting forces on spot-welded joints in aluminum subjected to combined direct tensile/tensile shear loading. Weld Cut. 1997;49(8):129–130.
   Google Scholar
• Davies R, Pedreschi R, Sinha B. Moment-rotation behaviour of groups of press-joins in cold-formed steel structures. Thin-Wall Struct. 1997;27(3):203–222.10.1016/S0263-8231(96)00034-1
   Web of Science ®Google Scholar
• Pedreschi R, Sinha B, Davies R, et al. Factors influencing the strength of mechanical clinching. International specialty conference on cold-formed steel structures: recent research and developments in cold-formed steel design and construction 1998; 1:549–562.
   Google Scholar
• Lennon R, Pedreschi R, Sinha B. Comparative study of some mechanical connections in cold formed steel. Construct Build Mater. 1999;13(3):109–116.10.1016/S0950-0618(99)00018-5
   Web of Science ®Google Scholar
• Pedreschi R, Sinha B. An experimental study of cold formed steel trusses using mechanical clinching. Construct Build Mater. 2008;22(5):921–931.
   Web of Science ®Google Scholar
• Pedreschi R, Sinha B. Predicting the shear strength of mechanical clinching in cold-formed steel structures. J Mater Civil Eng. 2006;18(3):435–442.10.1061/(ASCE)0899-1561(2006)18:3(435)
   Web of Science ®Google Scholar
• Varis J. The suitability of round clinching tools for high strength structural steel. Thin-Wall Struct. 2002;40(3):225–238.10.1016/S0263-8231(01)00063-5
   Web of Science ®Google Scholar
• Varis J. The suitability of clinching as a joining method for high-strength structural steel. J Mater Process Technol. 2003;132(1–3):242–249.10.1016/S0924-0136(02)00933-0
   Web of Science ®Google Scholar
• Varis J. Ensuring the integrity in clinching process. J Mater Process Technol. 2006;174(1–3):277–285.10.1016/j.jmatprotec.2006.02.001
   Web of Science ®Google Scholar
• Varis J, Lepistö J. A simple testing-based procedure and simulation of the clinching process using finite element analysis for establishing clinching parameters. Thin-Wall Struct. 2003;41(8):691–709.10.1016/S0263-8231(03)00026-0
   Web of Science ®Google Scholar
• Varis J. Economics of clinched joint compared to riveted joint and example of applying calculations to a volume product. J Mater Process Technol. 2006;172(1):130–138.10.1016/j.jmatprotec.2005.09.009
   Web of Science ®Google Scholar
• Coppieters S, Cooreman S, Sol H, et al. Reproducing the experimental strength of clinched connections with finite element methods. Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics. 2007;1:572–579.
   Google Scholar
• Coppieters S, Lava P, Sol H, et al. Determination of hardening behavior and contact friction of sheet metal in a multi-layered upsetting test. Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics. 2010;3:2351–2357.
   Google Scholar
• Coppieters S, Lava P, Sol H, et al. Multi-axial quasi-static strength of a clinched sheet metal assembly. Conference Proceedings of the Society for Experimental Mechanics Series. 2013;4:339–344.10.1007/978-1-4614-4226-4
   Google Scholar
• Coppieters S, Lava P, Sol H, et al. Determination of hardening behavior and contact friction of sheet metal in a multi-layered upsetting test. Conference Proceedings of the Society for Experimental Mechanics Series. 2011;6:733–739.10.1007/978-1-4419-9792-0
   Google Scholar
• Coppieters S, Lava P, Van Hecke R, et al. Numerical and experimental study of the multi-axial quasi-static strength of clinched connections. Int J Mater Form. 2013;6(4):437–451.10.1007/s12289-012-1097-4
   Web of Science ®Google Scholar
• Mori K. Joining processes by plastic deformation. Adv Mater Res. 2014;966–967:29–47.10.4028/www.scientific.net/AMR.966-967
   Google Scholar
• Abe Y, Kishimoto M, Kato T, et al. Joining of hot-dip coated steel sheets by mechanical clinching. Int J Mater Form. 2009;2:291–294.10.1007/s12289-009-0446-4
   Web of Science ®Google Scholar
• Mori K, Abe Y, Kato T. Mechanism of superiority of fatigue strength for aluminium alloy sheets joined by mechanical clinching and self-pierce riveting. J Mater Process Technol. 2012;212(9):1900–1905.10.1016/j.jmatprotec.2012.04.017
   Web of Science ®Google Scholar
• Abe Y, Kato T, Mori K. Joining of aluminium alloy and mild steel sheets using mechanical clinching. Mater Sci Forum. 2007;561–565(PART 2):1043-1046.10.4028/www.scientific.net/MSF.561-565
   Google Scholar
• Abe Y, Kato T, Mori K, et al. Mechanical clinching of ultra-high strength steel sheets and strength of joints. J Mater Process Technol. 2014;214(10):2112–2118.10.1016/j.jmatprotec.2014.03.003
   Web of Science ®Google Scholar
• Lambiase F, Di Ilio A. Damage analysis in mechanical clinching: experimental and numerical study. J Mater Process Technol. 2016;230:109–120.10.1016/j.jmatprotec.2015.11.013
   Web of Science ®Google Scholar
• Lambiase F. Clinch joining of heat-treatable aluminum AA6082-T6 alloy under warm conditions. J Mater Process Technol. 2015;225:421–432.10.1016/j.jmatprotec.2015.06.022
   Web of Science ®Google Scholar
• Lambiase F, Di Ilio A, Paoletti A. Joining aluminium alloys with reduced ductility by mechanical clinching. Int J Adv Manuf Technol. 2015;77(5–8):1295–1304.10.1007/s00170-014-6556-2
   Web of Science ®Google Scholar
• Lambiase F. Influence of process parameters in mechanical clinching with extensible dies. Int J Adv Manuf Technol. 2013;66(9–12):2123–2131.10.1007/s00170-012-4486-4
   Web of Science ®Google Scholar
• Lambiase F, Di Ilio A. An experimental study on clinched joints realized with different dies. Thin-Wall Struct. 2014;85:71–80.10.1016/j.tws.2014.08.004
   Web of Science ®Google Scholar
• Chen C, Zhao S, Cui M, et al. Mechanical properties of the two-steps clinched joint with a clinch-rivet. J Mater Process Technol. 2016;237:361–370.10.1016/j.jmatprotec.2016.06.024
   Web of Science ®Google Scholar
• Chen C, Zhao S, Han X, et al. Investigation of the height-reducing method for clinched joint with AL5052 and AL6061. Int J Adv Manuf Technol. 2017;89(5–8):2269–2276.
   Web of Science ®Google Scholar
• Chen C, Zhao S, Han X, et al. Investigation of mechanical behavior of the reshaped joints realized with different reshaping forces. Thin-Wall Struct. 2016;107:266–273.10.1016/j.tws.2016.06.020
   Web of Science ®Google Scholar
• Chen C, Zhao S, Cui M, et al. Rivet optimization and experimental research on the reshaping method. J Xi’an Jiaotong Univ. 2016;50(3):94–100.
   Google Scholar
• Chen C, Zhao S, Cui M, et al. An experimental study on the compressing process for joining Al6061 sheets. Thin-Wall Struct. 2016;108:56–63.10.1016/j.tws.2016.08.007
   Web of Science ®Google Scholar
• He X. Recent development in finite element analysis of clinched joints. Int J Adv Manuf Technol. 2010;48:607–612.10.1007/s00170-009-2306-2
   Web of Science ®Google Scholar
• He X, Liu F, Xing B, et al. Numerical and experimental investigations of extensible die clinching. Int J Adv Manuf Technol. 2014;74:1229–1236.10.1007/s00170-014-6078-y
   Web of Science ®Google Scholar
• He X, Zhao L, Yang H, et al. Investigations of strength and energy absorption of clinched joints. Comput Mater Sci. 2014;94:58–65.10.1016/j.commatsci.2014.01.056
   Web of Science ®Google Scholar
• Xing B, He X, Wang Y, et al. Study of mechanical properties for copper alloy H62 sheets joined by self-piercing riveting and clinching. J Mater Process Technol. 2015;216:28–36.10.1016/j.jmatprotec.2014.08.030
   Web of Science ®Google Scholar
• He X, Ding Y, Yang H, et al. Numerical study on free vibration characteristics of encastre clinched joints. J Vibroeng. 2014;16(1):360–368.
   Web of Science ®Google Scholar
• Lee CJ, Kim JY, Lee SK, et al. Design of mechanical clinching tools for joining of aluminum alloy sheets. Mater Des. 2010;31(4):1854–1861.10.1016/j.matdes.2009.10.064
   Web of Science ®Google Scholar
• Zheng J, He X, Xu J, et al. Finite element analysis of energy saving jointing method base on energy materials: clinching. Adv Mater Res. 2012;577:9–12.10.4028/www.scientific.net/AMR.577
   Google Scholar
• Zheng J, He X, Xing B, et al. Finite element simulation of deformation and microstructure of segmented die clinched joint. Mater Mech Eng. 2013;37(9):79–83.
   Google Scholar
• Oudjene M, Lebaal N, Ben-Ayed L, et al. Application of a kriging method for shape optimization of sheet metal forming tools. Comput Plast Fundament Appl. 2007; COMPLAS IX, n PART 1:100-103.
   Google Scholar
• Lebaal N, Oudjene M, Roth S. The optimal design of sheet metal forming processes: application to the clinching of thin sheets. Int J Comput Appl Technol. 2012;43(2):110–116.10.1504/IJCAT.2012.046041
   Google Scholar
• Oudjene M, Ben-Ayed L, Batoz JL. Geometrical optimization of clinch forming process using the response surface method. AIP Conf Proc. 2007;908:531–536.10.1063/1.2740865
   Google Scholar
• Oudjene M, Ben-Ayed L. On the parametrical study of clinch joining of metallic sheets using the Taguchi method. Eng Struct. 2008;30(6):1782–1788.10.1016/j.engstruct.2007.10.017
   Web of Science ®Google Scholar
• Oudjene M, Ben-Ayed L, Delamézière A, et al. Shape optimization of clinching tools using the response surface methodology with Moving Least-Square approximation. J Mater Process Technol. 2009;209:289–296.10.1016/j.jmatprotec.2008.02.030
   Web of Science ®Google Scholar
• Lambiase F, Di Ilio A. Finite element analysis of material flow in mechanical clinching with extensible dies. J Mater Eng Perform. 2013;22(6):1629–1636.10.1007/s11665-012-0451-5
   Web of Science ®Google Scholar
• Lambiase F, Di Ilio A. Optimization of the clinching tools by means of integrated FE modeling and artificial intelligence techniques. Procedia CIRP. 2013;12:163–168.10.1016/j.procir.2013.09.029
   Google Scholar
• Lambiase F, Di Ilio A, Paoletti A. Joining aluminum alloys with reduced ductility by mechanical clinching. Int J Adv Manuf Technol. 2015;77(5–8):1295–1304.10.1007/s00170-014-6556-2
   Web of Science ®Google Scholar
• Mucha J. The analysis of lock forming mechanism in the clinching joint. Mater Des. 2011;32(10):4943–4954.10.1016/j.matdes.2011.05.045
   Web of Science ®Google Scholar
• Mucha J, Kascak L, Spisak E. Joining the car-body sheets using clinching process with various thickness and mechanical property arrangements. Archiv Civil Mech Eng. 2011;11(1):135–148.10.1016/S1644-9665(12)60179-4
   Web of Science ®Google Scholar
• Zhao H, Li Z. Research on sheet stamping connection technology. Forg Stamp Technol. 2011;36(6):15–18.
   Google Scholar
• Abe Y, Mori K, Kato T. Joining of high strength steel and aluminium alloy sheets by mechanical clinching with dies for control of metal flow. J Mater Process Technol. 2012;212(4):884–889.10.1016/j.jmatprotec.2011.11.015
   Web of Science ®Google Scholar
• Abe Y, Taromaru K, Kato T, et al. Improvement of joinability in mechanical clinching of sheets using step punch. Special ed. In: 10th International Conference on Technology of Plasticity, ICTP. Aachen, 2011; p. 667–672.
   Google Scholar
• Abe Y, Nishino S, Mori K, et al. Improvement of joinability in mechanical clinching of ultra-high strength steel sheets using counter pressure. Adv Mater Res. 2014;966–967:607–616.10.4028/www.scientific.net/AMR.966-967
   Google Scholar
• Abe Y, Kato T, Mori K. Mechanical clinching of ultrahigh strength steel sheets. Steel Res Int. 2012; v SPL. ISSUE:615–618.
   Google Scholar
• Zhou Y, Lan F, Huang X, et al. Multi-objective optimization of geometry of clinching tools for steel-aluminum blank sheets. Mater Sci Technol. 2011;19(6):86–93.
   Google Scholar
• Zhou Y, Lan F, Chen J. Influence of tooling geometric parameters on clinching joint properties for steel-aluminum car-body structures. In: Proceedings of 3rd IEEE International Conference on Computer Science and Information Technology. Vol. 5. ICCSIT; 2010. p. 441-445.
   Google Scholar
• Shi B, Wang Y, Liu S, et al. Design method of the parameters of tools for clinching technology. Adv Mater Res. 2012;455–456:1491–1496.
   Google Scholar
• Plancak M, Car Z, Vilotic D, et al. Upsetting of bimetallic components in closed die. Eng Review. 2011;31(2):105–109.
   Google Scholar
• Zhao Y, Zhao S, Xu F, et al. Air-hydraulic intensifier equipment and technology research of clinching. Appl Mech Mater. 2014;556–562:1205–1210.10.4028/www.scientific.net/AMM.556-562
   Google Scholar
• Han X, Zhao S, Xu F. Research on clinching with AC servo direct-drive device. Appl Mech Mater. 2014;556–562:1318–1322.
   Google Scholar
• Israel M. The suitability of analytical and numerical methods for developing clinching processes with thick sheet metal. Adv Mater Res. 2014;907:151–163.10.4028/www.scientific.net/AMR.907
   Google Scholar
• Israel M, Jesche F, Mauermann R, et al. Clinching of thick sheets - Innovative joining technology for steelwork. Stahlbau. 2010;79(7):510–514. German.10.1002/stab.v79:7
   Web of Science ®Google Scholar
• He X, Yu T, Gao A, et al. Investigations of join-ability and energy absorption of clinched joints in titanium and aluminum-lithium sheet materials. Mater Trans. 2016;57(10):1849–1852.10.2320/matertrans.M2016223
   Web of Science ®Google Scholar
• Naito Y, Sakiyama T, Nose T, et al. Current problems and the answer techniques in welding technique of auto bodies - Second part. Nippon Steel Tech Report. 2013;103:76–82.
   Google Scholar
• Taube K. Carbon-based coatings for dry sheet-metal working. Surf Coat Technol. 1998;98(1–3):976–984.10.1016/S0257-8972(97)00178-3
   Web of Science ®Google Scholar
• Krzton HJ, Niesler M, Kania Z. The application of the X-ray micro-diffraction to study some industrial problems. Powder Diffract. 2013;28(SUPPL.2):S133–S143.10.1017/S0885715613001085
   Web of Science ®Google Scholar
• Iordachescu D, Georgescu V, Iordachescu M. Cold pressure processes for joining aluminum. Int J Join Mater. 2004;16(1):2–8.
   Google Scholar
• Zhang W, Wen T, Zhang J, et al. Clinch technology and its development. J Hot Work Technol. 2011;40(21):117–120.
   Google Scholar
• Budde L. Untersuchungenzur Kombination quasi-formschlüssiger und stoffschlüssiger Verbindungsverfahren [dissertation]. Universität-GH-Paderborn, F.R.G; 1989.
   Google Scholar
• Budde L, Gao S. A study of dynamical behaviour of quasi form-fit joining. ASME Prod Eng Div Publ PED. 1991;51:43–48.
   Google Scholar
• Budde L, Wilhelm L. Stanznietenistzukunftträchtig in der Blechverarbeitung. Bänder Bleche Rohre. 1991;32(5):94–100.
   Google Scholar
• Budde L, Klasfauseweh U. Analysen der Beanspruchungendurchsetzgefuegter Strukturen. Bänder Bleche Rohre. 1992;33(5):46–48.
   Google Scholar
• Budde L, Klemens U. Aufbaueines Expertensystemsfürmechanische Fügetechnik. Bänder Bleche Rohre. 1992;33(8):40–51.
   Google Scholar
• Kim JS, Cho HS, Lappe W, et al. Quality estimation method for clinching processes via neural network. ASME Dyn Syst Control Div Publ DSC. 1993;50:271–276.
   Google Scholar
• Gao S, Budde L. Mechanism of mechanical press joining. Int J Mach Tool Manuf. 1994;34(5):641–657.10.1016/0890-6955(94)90049-3
   Web of Science ®Google Scholar
• Bober J, Liebig HP. Prozessanalysebeimdruckfügen. Bänder Bleche Rohre. 1990;31(10):143–146.
   Google Scholar
• Liebig HP, Bober J, Göpfert D. Qualitätssicherungdurchrechnergestützte Überwachung des betrieblichen Druckfügeprozesses. Bleche Rohre Profile. 1992;39(6):466–471.
   Google Scholar
• Liebig HP, Bober J, Richter A. Prozessüberwachung in der Druckfügetechnik. Bänder Bleche Rohre. 1996;37(9):24–28.
   Google Scholar
• Kuhne T. Clinching and adhesives: complex processes using a combination of materials. Adhaesion Kleben und Dichten. 2008;4:24–27.
   Google Scholar
• Bruno I, Giotti A, Monsignori M, et al. A distributed industrial application for quality control of clinched boards based on computer vision. ACM Int Conf Proceed Series. 2002;27:715–718.
   Google Scholar
• Bellini P, Bruno I, Nesi P. A distributed system for computer vision quality control of clinched boards. Real-Time Imag. 2004;10(3):161–176.10.1016/j.rti.2004.05.001
   Web of Science ®Google Scholar
• Tan Y, Hahn O, Du F. Process monitoring method with window technique for clinch joining. ISIJ Int. 2005;45(5):723–729.10.2355/isijinternational.45.723
   Web of Science ®Google Scholar
• Schraft RD, Schmid S, Breckweg A. Clinching with a superimposed movement - a method for force reduced joining. Assembly Automat. 2003;23(2):144–146.10.1108/01445150310471374
   Web of Science ®Google Scholar
• Lee CJ, Kim JY, Lee SK, et al. Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets. J Mech Sci Technol. 2010;24(1):123–126.10.1007/s12206-009-1118-5
   Web of Science ®Google Scholar
• Lee CJ, Lee SK, Lee SB, et al. Characteristic of mechanical clinching for a15052 to high-strength steels. Transact Korean Soc Mech Eng A. 2010;34(8):997–1006. .10.3795/KSME-A.2010.34.8.997
   Google Scholar
• Wen T, Zhang W, Chen S. Study on clinching process and connection strength of 6016 and H70 sheets. Mater Sci Technol. 2014;22(2):43–48.
   Google Scholar
• Roux E, Bouchard PO. Kriging metamodel global optimization of clinching joining processes accounting for ductile damage. J Mater Process Technol. 2013;213(7):1038–1047.10.1016/j.jmatprotec.2013.01.018
   Web of Science ®Google Scholar
• Behrens BA, Hübner S, Eckold CP, et al. Reducing damage of coating caused by clinching of aluminum sheet metal by process optimization. In: 9th International Conference on Technology of Plasticity, ICTP. Gyeongju. 2008; p. 1304–1309.
   Google Scholar
• LaBoube RA. Innovative cold-formed steel I-joist. Solid Mech Appl. 2006;140:393–399.
   Google Scholar
• Pedreschi R, Sinha B. The potential of press-joining in cold-formed steel structures. Constr Build Mater. 1996;10(4):243–250.10.1016/0950-0618(96)00006-2
   Web of Science ®Google Scholar
• Pedreschi R, Sinha B, Davies R. Advanced connection techniques for cold-formed steel structures. J Struct Divis ASCE. 1997;123(2):138–144.10.1061/(ASCE)0733-9445(1997)123:2(138)
   Web of Science ®Google Scholar
• Davies R, Pedreschi R, Sinha B. The Shear behaviour of press-joining in cold-formed steel structures. Thin-Wall Struct. 1996;25(3):153–170.10.1016/0263-8231(96)00004-3
   Web of Science ®Google Scholar
• Wenning PH, Ngaile G, Altan T, et al. Design of a fastener clinching process using FEM. Transact North American Manuf Res Institut SME. 2003;31:17–24.
   Google Scholar
• Guo H. Analysis of deformation mechanism and forming force for sheet clinched joint. Forg Stamp Technol. 2014;39(8):14–18.
   Google Scholar
• Hamel V, Roelandt JM, Gacel JN, et al. Finite element modeling of clinch forming with automatic remeshing. Comput Struct. 2000;77(2):185–200.10.1016/S0045-7949(99)00207-2
   Web of Science ®Google Scholar
• Coppieters S, Kuwabara T. Identification of post-necking hardening phenomena in ductile sheet metal. Experiment Mech. 2014;54(8):1355–1371.10.1007/s11340-014-9900-4
   Web of Science ®Google Scholar
• Antonelli D, Settineri LM. FEM simulation of clinched joints behavior. Transact North American Manuf Res Institut SME. 2001;XXIX:35-41.
   Google Scholar
• Chenot JL, Bouchard PO, Massoni E, et al. Finite element modeling and optimization of mechanical joining technology. AIP Conf Proceed. 2011;1353:1247–1252.10.1063/1.3589687
   Google Scholar
• Chenot JL, Bouchard PO, Fourment L, et al. Optimization of forming processes. Steel Res Int. 2012; v SPL. ISSUE:1–8.
   Google Scholar
• Hahn O, Kurzok JR, Rohde A, et al. Computer-aided dimensioning of resistance-spot-welded and mechanically joined components. Weld Res Abroad. 1999;45(4):2–7.
   Google Scholar
• Hahn O, Kurzok JR, Rohde A. ThesingT. Computer-aided dimensioning of resistance-spot-welded and mechanically joined components, Weld Cut. 1999;51(1):E13–16.
   Google Scholar
• Feng M, He X, Yan K, et al. Numerical simulation and analysis of clinching process. Sci Technol Eng. 2011;11(23):5538–5541.
   Google Scholar
• Yang H, He X, Deng C, et al. Experimental and numerical investigations on the behavior of clinched connection in aluminum alloy. J Hot Work Technol. 2013;42(15):93–100.
   Google Scholar
• Yang H, He X, Zhou S, et al. A study of clinching for multi-layer metal sheets. J Hot Work Technol. 2013;42(24):37–40.
   Google Scholar
• Cheong W, Kam H, Wang C, et al. Rigid-plastic finite element simulation of cold forging and sheet metal forming by Eulerian meshing method. Adv Mater Res. 2014;970:177–184.10.4028/www.scientific.net/AMR.970
   Google Scholar
• Hamel V, Roelandt JM, Gacel JN, et al. Clinch forming simulation with automatic remeshing. In: 6th International Conference on Numerical Method Industrial Forming Process. 1998; p. 129–135.
   Google Scholar
• Hamel V. Contribution à l’étude de l’assemblage par clinchage: Aspects numériquesetexpérimentaux [ dissertation]. France: Université de Technologie de Compiègne; 1998. French.
   Google Scholar
• Sahyoun A, Rassineux A, Roëlandt J, et al. An adaptive remeshing procedure for modeling the clinch forming process. ASME Bienn Conf Eng Syst Des Anal ESDA. 2012;1:583–588.
   Google Scholar
• Bhalerao R, Heers B, Bohm M, et al. Finite element simulations of joints used in the automotive industry. ASME Manufact Eng Div Pulb MED. 2002;13:491–496.
   Google Scholar
• Long J, Lan F, Chen J, et al. Mechanical properties prediction of the mechanical clinching joints based on genetic algorithm and BP neural network. Chinese J Mech Eng (English Edition). 2009;22(1):36–41.10.3901/CJME.2009.01.036
   Web of Science ®Google Scholar
• Long J, Lan F, Chen J. Neural network-based mechanical property prediction in the mechanical clinching joints. Comput Integrat Manuf Syst. 2009;15(8):1614–1620.
   Google Scholar
• Long J, Lan F, Chen J, et al. Experimental investigation of the joints of mechanical clinching in the steel-aluminum hybrid structure car body. J Plasticity Eng. 2009;16(1):88–94.
   Google Scholar
• Huang X, Chen J, Zhou Y, et al. Matching law and optimization of different strength grade steel-aluminum sheets mechanical clinching. Comput Integrat Manuf Syst. 2012;18(5):957–964.
   Google Scholar
• Shi B, Liao S, Peng S, et al. FEA simulation of clinching process based on GTN damage model. Adv Mater Res. 2013;652–654:2254–2260.10.4028/www.scientific.net/AMR.652-654
   Google Scholar
• Shi B, Peng S, Liu S, et al. Simulation analysis of the mechanical clinch joining process based on the GTN model. Mater Sci Technol. 2012;20(2):86–89.
   Google Scholar
• Ippolito R, Settineri L, Barcellona A, et al. Numerical and experimental optimization of the clinching process. Tech Pap Soc Manuf Eng MF. 1999;99–155:1–6.
   Google Scholar
• Drossel W, Falk T, Israel M, et al. Unerring planning of clinching processes through the use of mathematical methods. Key Eng Mater. 2014;611–612:1437–1444.10.4028/www.scientific.net/KEM.611-612
   Google Scholar
• Jayasekara V, Min KH, Noh JH, et al. Rigid-plastic and elastic-plastic finite element analysis on the clinching joint process of thin metal sheets. Metal Mater Int. 2010;162(2):339–347.10.1007/s12540-010-0427-7
   Web of Science ®Google Scholar
• Yang X, Tong Z, Dai X, et al. Finite element analysis of punching bonding technology for automobile sheets. Automobile Tech. 2006;10:41–43.
   Google Scholar
• Zhou L, Lv J, Lu S, et al. Study of simplified finite element modeling technique for mechanical clinching joints. Forg Stamp Technol. 2014;39(5):126–131.
   Google Scholar
• Mori K, Abe Y, Kato T. Finite element simulation of plastic joining processes of steel and aluminum alloy sheets. AIP Conf Proc. 2007;908:197–202.10.1063/1.2740811
   Google Scholar
• Eshtayeh MM, Hrairi M. Recent and future development of the application of finite element analysis in clinching process. Int J Adv Manuf Technol. 2016;84(9–12):2589–2608.10.1007/s00170-015-7781-z
   Web of Science ®Google Scholar
• Eshtayeh MM, Hrairi M. Multi objective optimization of clinching joints quality using Grey-based Taguchi method. Int J Adv Manuf Technol. 2016;87(1–4):233–249.10.1007/s00170-016-8471-1
   Web of Science ®Google Scholar
• Coppieters S, Cooreman S, Van Hecke R, et al. Inverse identification of flow curves and interface friction for FE simulations of clinch forming. Soc Exp Mech - SEM Annu Conf Expos Exp Appl Mech. 2009;3:2052–2057.
   Google Scholar
• Coppieters S, Cooreman S, Lava P, et al. Reproducing the experimental pull-out and shear strength of clinched sheet metal connections using FEA. Int J Mater Form. 2011;4(4):429–440.10.1007/s12289-010-1023-6
   Web of Science ®Google Scholar
• Breda A, Coppieters S, Debruyne D. Equivalent modelling strategy for a clinched joint using a simple calibration method. Thin-Walled Struct. 2017;113:1–12.10.1016/j.tws.2016.12.002
   Web of Science ®Google Scholar
• Lee SW, Kim TH, Han GJ. Development of single-action, two-step clinching system using finite element analysis. Transact Nonferrous Metal Society China (English Edition). 2009;19(SUPPL. 1):s266–s270.10.1016/S1003-6326(10)60282-8
   Web of Science ®Google Scholar
• Saberi S, Enzinger N, Vallant R, et al. Influence of plastic anisotropy on the mechanical behavior of clinched joint of different coated thin steel sheets. Int J Mater Form. 2008;1(SUPPL. 1):273–276.10.1007/s12289-008-0349-9
   Web of Science ®Google Scholar
• Busse S, Merklein M, Roll K, et al. Numerical and experimental investigations of an innovative clinching process. 10th Int Conf Technol Plast ICTP. Aachen, 2011; p. 736–741.
   Google Scholar
• Rill D, Wei M, Hoffmann H, et al. Simulation assisted analysis of material flow in roller clinched joints. Adv Mater Res. 2014;966–967:628–640.10.4028/www.scientific.net/AMR.966-967
   Google Scholar
• Markowski T, Mucha J, Witkowski W. FEM analysis of clinching joint machine’s C-frame rigidity. Maintenance Reliab. 2013;15(1):51–57.
   Google Scholar
• Gediga J, Beddies H, Florin H, et al. Process modeling in the life cycle design-environmental modeling of joining technologies with in the automotive industry. In: Total Life Cycle Conference & Exposition; Graz, SAE Technical Paper. 1998.
   Google Scholar
• Maier J, Schroeder D. Clinch joints in aluminium - strength characteristics. Bänder Bleche Rohre. 1991;32(5):83–87.
   Google Scholar
• Patrick EP, Sharp ML. Joining aluminum body structure. Automot Eng Int. 1992;100(5):31–33.
   Google Scholar
• France LK, Freeman R. Welding and joining of magnesium. Automotive and Transportation Technology Congress and Exhibition; Barcelona, SAE Technical Paper. 2001.
   Google Scholar
• Hahn O, Horstmann M. Mechanical joining of magnesium components by means of inductive heating - realization and capability. Mater Sci Forum. 2007;539–543(2):1638–1643.10.4028/www.scientific.net/MSF.539-543
   Google Scholar
• Hahn O, Tan Y, Schroeder M, et al. Thermally supported mechanical joining of magnesium components. Mater Sci Forum. 2005;488–489:365–370.10.4028/www.scientific.net/MSF.488-489
   Google Scholar
• Neugebauer R, Dietrich S, Kraus C. Joining by forming with a flat counter tool - A new way of joining magnesium components. Mater Sci Forum. 2007;539–543(4):3949–3954.10.4028/www.scientific.net/MSF.539-543
   Google Scholar
• Neugebauer R, Dietrich S, Kraus C. Dieless clinching and dieless rivet-clinching of magnesium. Key Eng Mater. 2007;344:693–698.10.4028/www.scientific.net/KEM.344
   Google Scholar
• Neugebauer R, Kraus C, Dietrich S. Advances in mechanical joining of magnesium. CIRP Annals - Manuf Tech. 2008;57(1):283–286.10.1016/j.cirp.2008.03.025
   Web of Science ®Google Scholar
• Shi B, Li H, Peng S, et al. Effect of heating temperature on clinching joint of AZ31 magnesium sheets. Mater Mech Eng. 2013;37(12):27–30.
   Google Scholar
• Han S, Wu Y, Zeng Q. Numerical simulation for heat transfer process of clinching with magnesium alloys. Adv Mater Res. 2012;472–475:1995–1999.10.4028/www.scientific.net/AMR.472-475
   Google Scholar
• Han S, Lv Q, Yang L, et al. Innovation for joining by forming of magnesium alloy based on TRIZ. Adv Mater Res. 2011;189–193:3284–3287.10.4028/www.scientific.net/AMR.189-193
   Google Scholar
• Zhang Y, He X, Liu F. Study on the property of clinched joint in similar-dissimilar sheets about titanium alloy. Appl. Mech. Mater. 2015;723:888–891.10.4028/www.scientific.net/AMM.723
   Google Scholar
• He X, Zhang Y, Xing B, et al. Mechanical properties of extensible die clinched joints in titanium sheet materials. Mater Des. 2015;71:26–35.10.1016/j.matdes.2015.01.005
   Web of Science ®Google Scholar
• Yang H, He X, Zeng K, et al. Numerical simulation of clinching process in copper alloy sheets. Adv Mater Res. 2013;753–755:439–442.
   Google Scholar
• Yang H, He X, Ding Y, et al. Study on clinched joints in similar and dissimilar sheets about copper alloy. J Hot Work Technol. 2014;43(7):34–40.
   Google Scholar
• Abibe AB, Amancio-Filho ST, Dos Santos JF, et al. Development and analysis of a new joining method for polymer-metal hybrid structures. J Thermoplast Composite Mater. 2011;24(2):233–249.10.1177/0892705710381469
   Web of Science ®Google Scholar
• Abibe AB, Amancio-Filho ST, dos Santos JF, et al. Mechanical and failure behaviour of hybrid polymer-metal staked joints. Mater Des. 2013;46:338–347.10.1016/j.matdes.2012.10.043
   Web of Science ®Google Scholar
• Lüder S, Härtel S, Binotsch C, et al. Influence of the moisture content on flat-clinch connection of wood materials and aluminium. J Mater Process Technol. 2014;214(10):2069–2074.10.1016/j.jmatprotec.2014.01.010
   Web of Science ®Google Scholar
• Gude M, Hufenbach W, Kupfer R, et al. Development of novel form-locked joints for textile reinforced thermoplastices and metallic components. J Mater Process Technol. 2015;216:140–145.10.1016/j.jmatprotec.2014.09.007
   Web of Science ®Google Scholar
• Weber A. New twists on an old technology. Assembly. 2010;53(13):40–43.
   Google Scholar
• Lambiase F, Di Ilio A. Mechanical clinching of metal-polymer joints. J Mater Process Technol. 2015;215:12–19.10.1016/j.jmatprotec.2014.08.006
   Web of Science ®Google Scholar
• Grujicic M, Sellappan V, Arakere G, et al. The potential of a clinch-lock polymer metal hybrid technology for use in load-bearing automotive components. J Mater Eng Perform. 2009;18(7):893–902.10.1007/s11665-008-9325-2
   Web of Science ®Google Scholar
• Grujicic M, Sellappan V, Arakere G, et al. Investigation of a polymer metal inter-locking technology for use in load-bearing automotive components. Multidiscipline Model Mater Struct. 2010;6(1):23–44.10.1108/15736101011055257
   Google Scholar
• Gerstmann T. AwiszusB. Recent developments in flat-clinching. Comput Mater Sci. 2014;81:39–44.10.1016/j.commatsci.2013.07.013
   Web of Science ®Google Scholar
• Lambiase F, Ko DC. Feasibility of mechanical clinching for joining aluminum AA6082-T6 and carbon fiber reinforced polymer sheets. Mater Des. 2016;107:341–352.10.1016/j.matdes.2016.06.061
   Web of Science ®Google Scholar
• Lambiase F. Joinability of different thermoplastic polymers with aluminium AA6082 sheets by mechanical clinching. Int J Adv Manuf Technol. 2015;80(9–12):1995–2006.10.1007/s00170-015-7192-1
   Web of Science ®Google Scholar
• Lambiase F. Mechanical behaviour of polymer-metal hybrid joints produced by clinching using different tools. Mater Des. 2015;87:606–618.10.1016/j.matdes.2015.08.037
   Web of Science ®Google Scholar
• Lambiase F, Ko DC. Two-steps clinching of aluminum and carbon fiber reinforced polymer sheets. Compos Struct. 2017;164:180–188.10.1016/j.compstruct.2016.12.072
   Web of Science ®Google Scholar
• Lambiase F, Durante M, Di Ilio A. Fast joining of aluminum sheets with Glass Fiber Reinforced Polymer (GFRP) by mechanical clinching. J Mater Process Technol. 2016;236:241–251.10.1016/j.jmatprotec.2016.04.030
   Web of Science ®Google Scholar
• Wines BL. Adhesive and mechanical clinch bond strengths - a comparison to spot weld strengths. International Congress and Exposition; SAE Technical Paper. 1989.
   Google Scholar
• Moroni F, Pirondi A. Hybrid joints: evaluation of the increase of the mechanical performances with respect to simple joints. Rivista Italianadella Saldatura. 2009;61(5):603-612. Italian.
   Google Scholar
• Etemadi S, Hahn O, Roll K. Simulation of hybrid joining technologies using the example of clinch-bonding. Key Eng Mater. 2012;504–506:777–782.10.4028/www.scientific.net/KEM.504-506
   Google Scholar
• Hahn O, Wibbeke T. Application of low-heat hybrid joining technologies for the joining of thin-walled sheet materials. Weld Cut. 2005;4(4):208–214.
   Google Scholar
• Moroni F, Pirondi A, Kleiner F. Experimental analysis and comparison of the strength of simple and hybrid structural joints. Int J Adhe Adhe. 2010;30(5):367–379.10.1016/j.ijadhadh.2010.01.005
   Web of Science ®Google Scholar
• Neugebauer R, Israel M, Mayer B, et al. Numerical and experimental studies on the clinch-bonding and riv-bonding process. Key Eng Mater. 2012;504–506:771–776.10.4028/www.scientific.net/KEM.504-506
   Google Scholar
• Sadowski T, Balawender T, Sliwa R, et al. Modern hybrid joints in aerospace: Modelling and testing. Archiv Metallurgy Mater. 2013;58(1):163–169.
   Web of Science ®Google Scholar
• Sadowski T, Golewski P. Numerical study of the pre-stressed connectors and their distribution on the strength of a single lap, a double lap and hybrid joints subjected to uniaxial tensile test. Archiv Metallurgy Mater. 2013;58(2):579–585.
   Web of Science ®Google Scholar
• Balawender T, Sadowski T, Golewski P. Numerical analysis and experiments of the clinch-bonded joint subjected to uniaxial tension. Comput Mater Sci. 2012;64:270–272.10.1016/j.commatsci.2012.05.014
   Web of Science ®Google Scholar
• Balawender T, Sadowski T, Golewski P. Experimental and numerical analyses of clinched and adhesively bonded hybrid joints. J Adhe Sci Technol. 2011;25(18):2391–2407.
   Web of Science ®Google Scholar
• Balawender T, Sadowski T, Knec M. Technological problems and experimental investigation of hybrid: clinched-adhesively bonded joint. Archiv Metallurgy Mater. 2011;56(2):439–446.
   Web of Science ®Google Scholar
• Xing B, He X, Feng M, et al. Analysis on influence of adhesive on strength of clinched joints with mathematical statistics. Mater Review. 2012;26(1):56–59.
   Google Scholar
• Liu F, He X, Xing B, et al. Influence of material property on clinched and hybrid joints performance. J Hot Work Technol. 2014;43(11):162–165.
   Google Scholar
• Friedrich S, Georgi W, Gehde M, et al. Hybrid joining technology - a new method for thermoplastic to metal. Annu Tech Conf ANTEC Conf Proc. 2013;2:1669–1675.
   Google Scholar
• Friedrich S, Georgi W, Gehde M, et al. Hybrid joining technology - a new method for joining thermoplastic-metal- mixed components. AIP Conf Proc. 2014;1593:121–127.10.1063/1.4873747
   Google Scholar
• Pirondi A, Moroni F. Clinch-bonded and rivet-bonded hybrid joints: application of damage models for simulation of forming and failure. J Adhe Sci Technol. 2009;23(10–11):1547–1574.10.1163/156856109X433063
   Web of Science ®Google Scholar
• Lee CJ, Lee JM, Lee KH, et al. Development of hybrid clinched structure by using multi-cohesive zone models. Int J Precision Eng Manuf. 2014;15(6):1015–1022.10.1007/s12541-014-0430-x
   Web of Science ®Google Scholar
• Heßeln F, Wanner MC. Ultrasonic assisted clinching of aluminium alloy sheets. Adv Mater Res. 2014;966–967:641–650.10.4028/www.scientific.net/AMR.966-967
   Google Scholar
• Mucha J, Witkowski W. The clinching joints strength analysis in the aspects of changes in the forming technology and load conditions. Thin-Wall Struct. 2014;82:55–66.10.1016/j.tws.2014.04.001
   Web of Science ®Google Scholar
• Mucha J, Witkowski W. The experimental analysis of the double joint type change effect on the joint destruction process in uniaxial shearing test. Thin-Wall Struct. 2013;66:39–49.10.1016/j.tws.2013.01.018
   Web of Science ®Google Scholar
• Mucha J, Kascak L, Spisak E. The experimental analysis of forming and strength of clinch riveting sheet metal joint made of different materials. Adv Mech Eng. 2013; Paper ID 848973.
   Web of Science ®Google Scholar
• Reich M, Milkereit B, Kalich J, et al. Short-time heat treatment of press hardened steel for laser assisted clinching. Mater Sci Technol (UK). 2014;30(11):1287–1296.10.1179/1743284714Y.0000000556
   Web of Science ®Google Scholar
• Osten J, Söllig P, Reich M, et al. Softening of high-strength steel for laser assisted clinching. Adv Mater Res. 2014;966–967:617–627.10.4028/www.scientific.net/AMR.966-967
   Google Scholar
• Borsellino C, Di Bella G, Ruisi VF. Study of new joining technique: flat clinching. Key Eng Mater. 2007;344:685–692.10.4028/www.scientific.net/KEM.344
   Google Scholar
• Wen T, Wang H, Yang C, et al. On a reshaping method of clinched joints to reduce the protrusion height. Int J Adv Manuf Technol. 2014;71(9–12):1709–1715.10.1007/s00170-014-5612-2
   Web of Science ®Google Scholar
• Awiszus B, Beyer U, Riedel F, et al. Simulation based development of the clinch connection with a plane surface on the die side. 9th Int Conf Technol Plast ICTP. Gyeongju, 2008;p.1501–1506.
   Google Scholar
• Beyer U, Awiszus B. Flat-clinching - a new possibility for joining different kinds of components in a flexible and effective way to a planar material compound. Steel Res Int. 2010; v SPL. ISSUE:1124–1127.
   Web of Science ®Google Scholar
• Neugebauer R, Todtermuschke M, Mauermann R, et al. Overview on the state of development and the application potential of dieless mechanical joining processes. Archiv Civil Mech Eng. 2008;8(4):51–60.10.1016/S1644-9665(12)60121-6
   Web of Science ®Google Scholar
• Chen C, Fan S, Han X, et al. Experimental study on the height-reduced joints to increase the cross-tensile strength. Int J Adv Manuf Technol. Forthcoming.
   Web of Science ®Google Scholar
• Chen C, Zhao S, Cui M, et al. Effects of geometrical parameters on the strength and energy absorption of the height-reduced joint. Int J Adv Manuf Technol. Forthcoming.
   Web of Science ®Google Scholar
• Chen C, Zhao S, Cui M, et al. Numerical and experimental investigations of the reshaped joints with and without a rivet. Int J Adv Manuf Technol. 2017;88(5–8):2039–2051.10.1007/s00170-016-8889-5
   Web of Science ®Google Scholar
• Chen C, Zhao S, Han X, et al. Optimization of a reshaping rivet to reduce the protrusion height and increase the strength of clinched joints. J Mater Process Technol. 2016;234:1–9.10.1016/j.jmatprotec.2016.03.006
   Web of Science ®Google Scholar
• Neugebauer R, Mauermann R, Grützner R. Combination of hydroforming and joining. Steel Res Int. 2005;76(12):939–944.10.1002/srin.2005.76.issue-12
   Web of Science ®Google Scholar
• Neugebauer R, Mauermann R, Grützner R. Hydrojoinin. Int J Mater Form. 2008;1(SUPPL. 1):1303–1306.10.1007/s12289-008-0142-9
   Web of Science ®Google Scholar
• Merklein M, Meschut G, Müller M, et al. Basic investigations of non-pre-punched joining by forming of aluminum alloy and high strength steel with shear-clinching technology. Key Eng Mater. 2014;611–612:1413–1420.10.4028/www.scientific.net/KEM.611-612
   Google Scholar
• Busse S, Merklein M, Roll K, et al. Numerical and experimental investigations of an innovative clinching process. 10th Int Conf Technol Plast ICTP. Aachen, 2011;p.736–741.
   Google Scholar
• Busse S, Merklein M, Roll K, et al. Development of a mechanical joining process for automotive body-in-white production. Int J Mater Form. 2010;3(SUPPL. 1):1059–1062.10.1007/s12289-010-0953-3
   Web of Science ®Google Scholar
• Müller M, Hörhold R, Merklein M, et al. Analysis of material behaviour in experimental and simulative setup of joining by forming of aluminium alloy and high strength steel with shear-clinching technology. Adv Mater Res. 2014;966–967:549–556.10.4028/www.scientific.net/AMR.966-967
   Google Scholar
• Lee CJ, Lee JM, Ryu HY, et al. Design of hole-clinching process for joining of dissimilar materials - Al6061-T4 alloy with DP780 steel, hot-pressed 22MnB5 steel, and carbon fiber reinforced plastic. J Mater Process Technol. 2014;214(10):2169–2178.10.1016/j.jmatprotec.2014.03.032
   Web of Science ®Google Scholar
• Lee CJ, Lee SH, Lee JM, et al. Design of hole-clinching process for joining CFRP and aluminum alloy sheet. Int J Precis Eng Manuf. 2014;15(6):1151–1157.10.1007/s12541-014-0450-6
   Web of Science ®Google Scholar
• Ahn NS, Lee CJ, Lee JM, et al. Joining high-strength steel and a16061 sheet using hole clinching process. Transact Korean Society Mech Eng A. 2012;36(6):691–698.10.3795/KSME-A.2012.36.6.691
   Google Scholar
• Lee SH, Lee CJ, Lee KH, et al. Influence of tool shape on hole clinching for carbon fiber-reinforced plastic and SPRC440. Adv Mech Eng. 2014; Paper ID 810864.
   Google Scholar
• Gao A, He X, Yu T, et al. Study on tensile test and failure mechanism of clinched joints of aluminum-lithium alloy. J Hot Work Technol. 2016;45(13):29–35.
   Google Scholar
• Gao A, He X, Cheng Q, et al. Study on mechanical properties of dissimilar sheets clinched joints of 1420 aluminum-lithium alloy. J Hot Work Technol. 2016;45(15):122–125.
   Google Scholar
• Wang Y, He X, Zeng K, et al. Influence of local heat treatment on failure behavior of TA1 titanium alloy-SPCC steel clinched joint. Mater Mech Eng. 2016;40(8):86–89.
   Google Scholar
• Yu T, He X, Gao A, et al. Study on mechanical properties of T- and single lap-clinched joints of dissimilar sheets for aluminum-lithium alloy. J Hot Work Technol. 2016;45(15):45–48.
   Google Scholar
• Yu T, He X, Gao A, et al. Mechanical properties of clinched joints in aluminum-lithium and titanium alloys. Aerospace Mater Technol. 2015;45(5):57–61.
   Google Scholar
• Zhang Y, He X, Wang Y, et al. Study on clinched joints in similar and dissimilar sheets of titanium alloys. J Hot Work Technol. 2015;44(9):23–26.
   Google Scholar