The effect of mechanical polishing and finishing on the corrosion resistance of AISI 304 stainless steel

References

• Y. X. Qiao, Y. G. Zheng, P. C. Okafor and W. Ke: ‘Electrochemical behaviour of high nitrogen bearing stainless steel in acidic chloride solution: effects of oxygen, acid concentration and surface roughness’, Electrochim. Acta, 2009, 54, 2298–2304. doi: 10.1016/j.electacta.2008.10.038
   Web of Science ®Google Scholar
• H. Luo, X. G. Li, C. F. Dong and K. Xiao: ‘Degradation of austenite stainless steel by atmospheric exposure in tropical marine environment’, Corros. Eng. Sci. Technol., 2013, 48, 221–229. doi: 10.1179/1743278212Y.0000000070
   Web of Science ®Google Scholar
• B. Jegdić, D. M. Dražić and J. P. Popić: ‘Open circuit potentials of metallic chromium and austenitic 304 stainless steel in aqueous sulphuric acid solution and the influence of chloride ions on them’, Corros. Sci., 2008, 50, 1235–1244. doi: 10.1016/j.corsci.2008.01.012
   Web of Science ®Google Scholar
• D. D. Macdonald: ‘Passivity – the key to our metals-based civilization’, Pure Appl. Chem., 1999, 7, 951–978.
   Google Scholar
• J. Kovac, T. Kosec and A. Legat: ‘Monitoring behaviour of 304 stainless steel under constant tensile loading by electrochemical impedance spectroscopy’, Corros. Eng. Sci. Technol., 2012, 47, 478–483. doi: 10.1179/1743278212Y.0000000029
   Web of Science ®Google Scholar
• M. D. Pereda, K. W. Kang, R. Bonetto, C. Llorente, P. Bilmes and C. Gervasi: ‘Impact of surface treatment on the corrosion resistance of ASTM F138-F139 stainless steel for biomedical applications’, Proc. Mater. Sci., 2012, 1, 446–453. doi: 10.1016/j.mspro.2012.06.060
   Google Scholar
• T. Shibata and K. Kokubo: ‘Effect of surface polishing on SCC susceptibility of sensitised type 304 stainless steel’, Corros. Eng. Sci. Technol., 2014, 49, 156–159. doi: 10.1179/1743278214Y.0000000159
   Web of Science ®Google Scholar
• S. M. Lee, W. G. Lee, Y. H. Kim and H. Jang: ‘Surface roughness and the corrosion resistance of 21Cr ferritic stainless steel’, Corros. Sci., 2012, 63, 404–409. doi: 10.1016/j.corsci.2012.06.031
   Web of Science ®Google Scholar
• G. T. Burstein and S. P. Vines: ‘Repetitive nucleation of corrosion pits on stainless steel and the effects of surface roughness’, J. Electrochem. Soc., 2001, 148, B504–B516. doi: 10.1149/1.1416503
   Google Scholar
• K. Sasaki and G. T. Burstein: ‘The generation of surface roughness during slurry erosion-corrosion and its effect on the pitting potential’, Corros. Sci., 1996, 38, 2111–2120. doi: 10.1016/S0010-938X(96)00066-2
   Web of Science ®Google Scholar
• T. Hong and M. Nagumo: ‘Effect of surface roughness on early stages of pitting corrosion of type 301 stainless steel’, Corros. Sci., 1997, 39, 1665–1672. doi: 10.1016/S0010-938X(97)00072-3
   Web of Science ®Google Scholar
• Y. Zuo, H. Wang and J. Xiong: ‘The aspect ratio of surface grooves and metastable pitting of stainless steel’, Corros. Sci., 2002, 44, 25–35. doi: 10.1016/S0010-938X(01)00039-7
   Web of Science ®Google Scholar
• G. T. Burstein and P. C. Pistorius: ‘Surface roughness and the metastable pitting of stainless steel in chloride solutions’, Corrosion, 1995, 51, 380–385. doi: 10.5006/1.3293603
   Web of Science ®Google Scholar
• A. Shahryari, W. Kamal and S. Omanovic: ‘The effect of surface roughness on the efficiency of the cyclic potentiodynamic passivation (CPP) method in the improvement of general and pitting corrosion resistance of 316LVM stainless steel’, Mater. Lett., 2008, 62, 3906–3909. doi: 10.1016/j.matlet.2008.05.032
   Web of Science ®Google Scholar
• L. R. Hilbert, D. Bagge-Ravn, J. Kold and L. Gram: ‘Influence of surface roughness of stainless steel on microbial adhesion and corrosion resistance’, Int. Biodeter. Biodegr., 2003, 52, 175–185. doi: 10.1016/S0964-8305(03)00104-5
   Web of Science ®Google Scholar
• M. B. Leban, C. Mikyška, T. Kosec, B. Markoli and J. Kovač: ‘The effect of surface roughness on the corrosion properties of type AISI 304 stainless steel in diluted NaCl and urban rain solution’, J. Mater. Eng. Perform., 2014, 23, 1695–1702. doi: 10.1007/s11665-014-0940-9
   Web of Science ®Google Scholar
• A. Burkert, H. S. Klapper and J. Lehmann: ‘Novel strategies for assessing the pitting corrosion resistance of stainless steel surfaces’, Mater. Corros., 2013, 64, 675–682. doi: 10.1002/maco.201206749
   Web of Science ®Google Scholar
• P. Peyre, C. Carboni, P. Forget, G. Beranger, C. Lemaitre and D. Stuart: ‘Influence of thermal and mechanical surface modifications induced by laser shock processing on the initiation of corrosion pits in 316L stainless steel’, J. Mater. Sci., 2007, 42, 6866–6877. doi: 10.1007/s10853-007-1502-4
   Web of Science ®Google Scholar
• H. S. Klapper, A. Burkert, J. Burkert, J. Jehmann and A. L. Villalba: ‘Influence of surface treatments on the pitting corrosion of type 304 stainless steel by electrochemical noise measurements’, Corrosion, 2011, 67, 075004-1–075004-13. doi: 10.5006/1.3613641
   Google Scholar
• T. Li, L. Liu, B. Zhang, Y. Li, F. Yan, N. Tao and F. Wang: ‘Passive behavior of a bulk nanostructured 316L austenitic stainless steel consisting of nanometer-sized grains with embedded nano-twin bundles’, Corros. Sci., 2014, 85, 331–342. doi: 10.1016/j.corsci.2014.04.039
   Web of Science ®Google Scholar
• M. A. M. Ibrahim, S. F. Korablov and M. Yoshimura: ‘Corrosion of stainless steel coated with TiN, (TiAl)N and CrN in aqueous environments’, Corros. Sci., 2002, 48, 815–828. doi: 10.1016/S0010-938X(01)00102-0
   Web of Science ®Google Scholar
• M. Serdar, L. V. Žulj and D. Bjegović: ‘Long-term corrosion behaviour of stainless reinforcing steel in mortar exposed to chloride environment’, Corros. Sci., 2013, 69, 149–157. doi: 10.1016/j.corsci.2012.11.035
   Web of Science ®Google Scholar
• Y. Li, S. Zhang, Y. He, L. Zhang and L. Wang: ‘Characteristics of the nitrided layer formed on AISI 304 austenitic stainless steel by high temperature nitriding assisted hollow cathode discharge’, Mater. Des., 2014, 64, 527–534. doi: 10.1016/j.matdes.2014.08.023
   Web of Science ®Google Scholar
• A. Turnbull, K. Mingard, J. D. Lord, B. Roebuck, D. R. Tice, K. J. Mottershead, N. D. Fairweather and A. K. Bradbury: ‘Sensitivity of stress corrosion cracking of stainless steel to surface machining and grinding procedure’, Corros. Sci., 2011, 53, 3398–3415. doi: 10.1016/j.corsci.2011.06.020
   Web of Science ®Google Scholar
• S. Ghosh and V. Kain: ‘Microstructural changes in AISI 304L stainless steel due to surface machining: Effect on its susceptibility to chloride stress corrosion cracking’, J. Nucl. Mater., 2010, 403, 62–67. doi: 10.1016/j.jnucmat.2010.05.028
   Web of Science ®Google Scholar