Microstructure, mechanical properties and corrosion performance of a few TMT rebars

References

• Reinforcement for concrete Materials and applications , Developed by Committee E-701, Materials for Concrete Construction, ACI Education Bulletin E2-00 (Reapproved 2006).
   Google Scholar
• S. K. Paul, S. Majumdar and S. Kundu: ‘Low cycle fatigue behaviour of thermo-mechanically treated rebar’, Mater. Des., 2014, 58, 402–411. doi: 10.1016/j.matdes.2014.01.079
   Web of Science ®Google Scholar
• URL: https://en.wikipedia.org/wiki/Thermomechanical_processing
   Google Scholar
• A. Shetty, K. Venkataramana, I. Gogoi and B. B. Praveen: ‘Performance enhancement of TMT rebar in accelerated corrosion’, J. Civil Eng. Res., 2012, 2 (1), 14–17. doi: 10.5923/j.jce.20120201.03
   Google Scholar
• L. Yu, R. François, V. H. Dang, V. L'Hostis and R. Gagné: ‘Development of chloride-induced corrosion in pre-cracked RC beams under sustained loading: effect of load-induced cracks, concrete cover, and exposure conditions’, Cem. Concr. Res., 2015, 67, 246–258. doi: 10.1016/j.cemconres.2014.10.007
   Web of Science ®Google Scholar
• C. A. Apostolopoulos, S. Demis and V. G. Papadakis: ‘Chloride-induced corrosion of steel reinforcement – mechanical performance and pit depth analysis’, Constr. Build. Mater., 2013, 38, 139–146. doi: 10.1016/j.conbuildmat.2012.07.087
   Web of Science ®Google Scholar
• Chen-Qing Ye, Rong-Gang Hu, Shi-Gang Dong, Xiao-Juan Zhang, Rui-Qing Hou, Rong-Gui Du, Chang-Jian Lin and Jin-Shan Pan: ‘EIS analysis on chloride-induced corrosion behaviour of reinforcement steel in simulated carbonated concrete pore solutions’, J. Electroanal. Chem., 2013, 688, 275–281. doi: 10.1016/j.jelechem.2012.09.012
   Web of Science ®Google Scholar
• Md. A. Islam: ‘Corrosion behaviours of high strength TMT steel bars for reinforcing cement concrete structures’, Procedia Eng., 2015, 125, 623–630. doi: 10.1016/j.proeng.2015.11.084
   Google Scholar
• B. Pradhan: ‘Corrosion behavior of reinforced concrete exposed to sodium chloride solution and composite sodium chloride-sodium sulfate solution’, Adv. Struct. Eng., ISBN 978-81-322-2187-6, Springer India, 2014, 3, 1875–1882.
   Google Scholar
• T. H. Nguyen, T. A. Nguyen, T. V. Nguyen, V. K. Le, T. M. T. Dinh, H. Thai, and X. Shi: ‘Effect of electrical injection of corrosion inhibitor on the corrosion of steel rebar in chloride-contaminated repair mortar’, Int. J. Corr., 2015, 2015, 1–10. doi: 10.1155/2015/862623
   Google Scholar
• M. G. Fontana: ‘Corrosion engineering’, 3rd edn, 153–541; 1986, New York, McGraw Hill.
   Google Scholar
• Y. Abboud, O. Tanane, A. El Bouari, R. Salghi, B. Hammouti, A. Chetouani and S. Jodeh: ‘Corrosion inhibition of carbon steel in hydrochloric acid solution using pomegranate leave extracts’, Corr. Eng. Sci. Technol., 2015, Advance Article.
   Google Scholar
• B. K. Panigrahi, S. Srikanth, and G. Sahoo: ‘Effect of alloying elements on tensile properties, microstructure and corrosion resistance of reinforcing bar steel’, J. Mater. Eng. Perform., 2009, 18 (8), 1102–1108. doi: 10.1007/s11665-008-9336-z
   Web of Science ®Google Scholar
• Lawrence H. Van Vlack: ‘Elements of material science and engineering’, 4th edn, 31–32; 1987, Massachusetts, Addison-Wesley Reading.
   Google Scholar
• C. Mesplont, S. Vandeputte and B. C. De Cooman: ‘Dilatometric study of the effect of soluble boron on the continuous and isothermal austenite decomposition in 0.15C-1.6Mn steel’, Int. J. Mater. Res., 2002, 93 (11), 1108–1118.
   Google Scholar
• H. Düzcükoğlu, and Selman Çetintürk: ‘Effect of boron addition on mechanical properties of 60SiCr7 steel’, Int. J. Mater. Mech. Manuf., 2015, 3 (2), 117–120.
   Google Scholar
• URL: http://ispatguru.com/boron-in-steels/
   Google Scholar
• A. Ray, D. Mukerjee, S. K. Sen, A. Bhattacharya, S. K. Dhua, M. S. Prasad, N. Banerjee, A. M. Popli and A. K. Sahu: ‘Microstructure and properties of thermomechanically strengthened reinforcement bars: a comparative assessment of plain-carbon and low-alloy steel grades’, J. Mater. Eng. Perform., 1997, 6 (3), 335–343. doi: 10.1007/s11665-997-0098-9
   Web of Science ®Google Scholar
• B. K. Panigrahi and S. K. Jain: ‘Impact toughness of high strength low alloy TMT reinforcement ribbed bar’, Bull. Mater. Sci., 2002, 25 (4), 319–324. doi: 10.1007/BF02704125
   Web of Science ®Google Scholar
• S. Das, J. Mathur, T. Bhattacharyya and S. Bhattacharyya: ‘Failure analysis of re-bars during bending operations’, Case Stud. Eng. Fail. Anal., 2014, 2, 51–53. doi: 10.1016/j.csefa.2014.04.003
   Google Scholar
• S. Das, P. Palit, S. Mukhopadhya, J. Mathur, A. Dey, G. Mukherjee, T. Bhattacharyya and S. Bhattacharyya: ‘Pinch roller failure analysis and resulting enhancement of rebar mechanical properties’, J. Fail. Anal. Prev., 2013, 13, 396–402. doi: 10.1007/s11668-013-9694-1
   Google Scholar
• A. I. Zaky, A. El-Morsy and T. El-Bitar: ‘Effect of different cooling rates on thermomechanically processed high-strength rebar steel’, J. Mater. Process. Technol., 2009, 209, 1565–1569. doi: 10.1016/j.jmatprotec.2008.04.011
   Web of Science ®Google Scholar
• Y. Xiong, T. He, Z. Guo, H. He, F. Ren and A. A. Volinsky: ‘Mechanical properties and fracture characteristics of high carbon steel after equal channel angular pressing’, Mater. Sci. Eng. A, 2013, 563, 163–167. doi: 10.1016/j.msea.2012.11.068
   Web of Science ®Google Scholar
• F. H. Samuel: ‘Crystallographic study of pearlite growth in steels’, Trans. ISIJ., 1983, 23, 403–409. doi: 10.2355/isijinternational1966.23.403
   Google Scholar
• S. Ghosh and S. Mula: ‘Thermomechanical processing of low carbon Nb–Ti stabilized microalloyed steel: microstructure and mechanical properties’, Mater. Sci. Eng. A, 2015, 646, 218–233. doi: 10.1016/j.msea.2015.08.072
   Web of Science ®Google Scholar
• Xiao-Nan Wang, Chang-Jun Chen, Hai-Sheng Wang, Shun-Hu Zhang, Min Zhang, Xia Luo: ‘Microstructure formation and precipitation in laser welding of microalloyed C–Mn steel’, J. Mater. Procss. Technol., 2015, 226, 106–114. doi: 10.1016/j.jmatprotec.2015.07.010
   Web of Science ®Google Scholar
• X. Wang, C. Chen, H. Wang, S. Zhang, M. Zhang and X. Luo: ‘Microstructure formation and precipitation in laser welding of microalloyed C-Mn steel’, J. Mater. Process. Technol., 2015, 226, 106–114. doi: 10.1016/j.jmatprotec.2015.07.010
   Web of Science ®Google Scholar
• H. N. Bar, S. Sivaprasad, N. Narasaiah, S. K. Paul, B. N. Sen, and S. Chandra: ‘Low cycle and ratchetting fatigue behaviour of high UTS/YS ratio reinforcing steel bars’, J. Mater. Eng. Perform., 2013, 22, 1701–1707. doi: 10.1007/s11665-013-0470-x
   Web of Science ®Google Scholar
• C. Rajkumar: ‘Increasing the yield strength of niobium micro-alloyed reinforcing bar, research report for master of science’, 14–90; 2008, Johannesburg, University of Witwatersrand.
   Google Scholar
• Y. Ma, Y. Li, and F. Wang: ‘Corrosion of low carbon steel in atmospheric environments of different chloride content’, Corr. Sci., 2009, 51, 997–1006. doi: 10.1016/j.corsci.2009.02.009
   Web of Science ®Google Scholar
• ASM Handbook, ‘Corrosion: fundamentals, testing, and protection’, Vol. 13A; 2003, Materials Park, Ohio 44073–0002, ASM International.
   Google Scholar
• M. F. Montemor, A. M. P. Simões and M. G. S. Ferreira: ‘Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques’, Cem. Concr. Compos., 2003, 25, 491–502. doi: 10.1016/S0958-9465(02)00089-6
   Web of Science ®Google Scholar
• C. M. Hansson: ‘Comments on electrochemical measurements of the rate of corrosion of steel in concrete’, Cem. Concr. Res., 1984, 14 (4), 574–584. doi: 10.1016/0008-8846(84)90135-2
   Web of Science ®Google Scholar
• M. Nagayama and M. Cohen: ‘The anodic oxidation of iron in a neutral solution’, J. Electrochem. Soc., 1963, 110 (6), 670–680. doi: 10.1149/1.2425849
   Google Scholar
• V. Jovancicevic, J. O'M. Bockris, J. L. Carbajal, P. Zelenay and T. Mizuno: ‘Adsorption and absorption of chloride ions on passive iron systems’, J. Electrochem. Soc., 1986, 133 (11), 2219–2226.http://dx.doi.org/10.1149/1.2108377
   Web of Science ®Google Scholar
• H. S. Wong, Y. X. Zhao, A. R. Karimi, N. R. Buenfeld and W. L. Jin: ‘On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion’, Corros. Sci., 2010, 52, 2469–2480. doi: 10.1016/j.corsci.2010.03.025
   Web of Science ®Google Scholar
• W.–J. Chitty, P. Berger, P. Dillmann and V. L'Hostis: ‘Long-term corrosion of rebars embedded in aerial and hydraulic binders – mechanisms and crucial physico-chemical parameters’, Corros. Sci., 2008, 50, 2117–2123. doi: 10.1016/j.corsci.2008.03.017
   Web of Science ®Google Scholar
• P. Montoya, I. Díaz, N. Granizo, D. de la Fuente and M. Morcillo: ‘An study on accelerated corrosion testing of weathering steel’, Mater. Chem. Phys., 2013, 142, 220–228. doi: 10.1016/j.matchemphys.2013.07.009
   Web of Science ®Google Scholar
• D. C. Cook, S. J. Oh, R. Balasubramanian and M. Yamashita: ‘The role of goethite in the formation of the protective corrosion layer on steels’, Hyperfine Interact., 1999, 122, 59–70. doi: 10.1023/A:1012685320582
   Web of Science ®Google Scholar
• R. Balasubramaniam and A. V. R. Kumar: ‘Characterization of Delhi iron pillar rust by X-ray diffraction, Fourier transform infrared spectroscopy and Mössbauer spectroscopy’, Corr. Sci., 2000, 42, 2085–2101. doi: 10.1016/S0010-938X(00)00045-7
   Web of Science ®Google Scholar
• K. H. Tan: ‘Principles of soil chemistry’, 1998, New York, USA, Mariel Dekker Inc.
   Google Scholar
• Y. Ma, Y. Li and F. Wang: ‘The effect of β-FeOOH on the corrosion behavior of low carbon steel exposed in tropic marine environment’, Mater. Chem. Phys., 2008, 112, 844–852. doi: 10.1016/j.matchemphys.2008.06.066
   Web of Science ®Google Scholar
• G. P. Singh, A. P. Moon, S. Sengupta, G. Deo, S. Sangal, and K. Mondal: ‘Corrosion behavior of IF steel in various media and its comparison with mild steel’, J. Mater. Eng. Perform., 2015, 24, 1961–1974. doi: 10.1007/s11665-015-1448-7
   Web of Science ®Google Scholar
• A. C. Tobón, M. D. Cruz, M. A. D. Aguilar and J. L. G. Velázquez: ‘Effect of flow rate on the corrosion products formed on traditional and new generation API 5L X-70 in a sour brine environment’, Int. J. Electrochem. Sci., 2015, 10, 2904–2920.
   Web of Science ®Google Scholar
• D. C. Smith and B. McEnaney: ‘The influence of dissolved oxygen concentration on the corrosion of grey cast iron in water at 50°C’, Corr. Sci., 1979, 19, 379–389. doi: 10.1016/0010-938X(79)90037-4
   Web of Science ®Google Scholar
• G. Jha, A. K. Singh, N. Bandyopadhyay, and O. N. Mohanty: ‘Seismic resistant reinforcing bars’, Prac. Fail. Anal., 2001, 1, 53–56. doi: 10.1007/BF02715364
   Google Scholar
• D. Rhodes and P. Felker: ‘Mass screening of prosopis (mesquite) seedlings for growth at seawater salinity concentrations’, For. Ecol. Manag., 1988, 24, 169–176. doi: 10.1016/0378-1127(88)90041-2
   Web of Science ®Google Scholar
• R. Winston Revie: ‘Uhlig's corrosion handbook’, 3rd edn, 2011, Hoboken, New Jersey, John Wiley & Sons, Inc.
   Google Scholar