Corrosion inhibition by the trace amount of sulphide ion in CO₂-saturated brine solutions

References

• S. Nesic and W. Sun: ‘Corrosion in acid gas solutions’, in ‘Shreir's corrosion’, (ed. T. J. A. Richardson), 1270–1298; 2010, Oxford, Elsevier.
   Google Scholar
• R. C. Newman, K. Rumash and B. J. Webster: ‘The effect of pre-corrosion on the corrosion rate of steel in neutral solutions containing sulphide: relevance to microbially influenced corrosion’, Corros. Sci., 1992, 33, 1877–1884. doi: 10.1016/0010-938X(92)90190-E
   Web of Science ®Google Scholar
• K. D. Efird, J. L. Smith, S. E. Blevins and N. D. Davis: ‘The crude oil effect on steel corrosion wettability preference and brine chemistry’, in ‘NACE Corrosion’, Houston, 04366; 2004.
   Google Scholar
• S. E. Hernandez, J. Bruzual, F. Lopez-Linares and J. G. Luzon: ‘Isolation of potential corrosion inhibiting compounds in crude oils’, in ‘NACE Corrosion’, 03330; 2003.
   Google Scholar
• S. E. Hajjaji, L. Aries, J.-P. Audouard and F. Dabosi: ‘The influence of alloying elements on the corrosion resistance of stainless steels in phosphoric acid medium polluted by sulphide ions’, 1995, 37, 927–939.
   Google Scholar
• Q. Xie and W. Chen: ‘Corrosion behavior of 16Mn low alloy steel in sulfide-containing Bayer solutions’, Corros. Sci., 2014, 86, 252–260. doi: 10.1016/j.corsci.2014.05.019
   Web of Science ®Google Scholar
• A. S. Hamdy, A. G. Sa’eh, M. A. Shoeib and Y. Barakat: ‘Evaluation of corrosion and erosion–corrosion resistances of mild steel in sulfide-containing NaCl aerated solutions’, Electrochim. Acta, 2007, 52, 7068–7074. doi: 10.1016/j.electacta.2007.05.034
   Web of Science ®Google Scholar
• J. Tang, Y. Shao, J. Guo, T. Zhang, G. Meng and F. Wang: ‘The effect of H2S concentration on the corrosion behavior of carbon steel at 90°C’, Corros. Sci., 2010, 52, 2050–2058. doi: 10.1016/j.corsci.2010.02.004
   Web of Science ®Google Scholar
• H. Ma, X. Cheng, G. Li, S. Chen, Z. Quan, S. Zhao and L. Niu: ‘The influence of hydrogen sulfide on corrosion of iron under different conditions’, Corros. Sci., 2000, 42, 1669–1683. doi: 10.1016/S0010-938X(00)00003-2
   Web of Science ®Google Scholar
• K. Rahmouni, M. Keddam, A. Srhiri and H. Takenouti: ‘Corrosion of copper in 3% NaCl solution polluted by sulphide ions’, Corros. Sci., 2005, 47, 3249–3266. doi: 10.1016/j.corsci.2005.06.017
   Web of Science ®Google Scholar
• M. A. Veloz and I. González: ‘Electrochemical study of carbon steel corrosion in buffered acetic acid solutions with chlorides and H2S’, Electrochim. Acta, 2002, 48, 135–144. doi: 10.1016/S0013-4686(02)00549-2
   Web of Science ®Google Scholar
• M. C. Fatah, M. C. Ismail, B. Ari-Wahjoedi and K. A. Kurnia: ‘Effects of sulphide ion on the corrosion behaviour of X52 steel in a carbon dioxide environment at temperature 40°C’, Mater. Chem. Phys., 2011, 127, 347–352. doi: 10.1016/j.matchemphys.2011.02.016
   Web of Science ®Google Scholar
• E. Abelev, T. A. Ramanarayanan and S. L. Bernasek: ‘Iron corrosion in CO2/Brine at low H2S concentrations: an electrochemical and surface science study’, J. Electrochem. Soc., 2009, 156, C331–C339. doi: 10.1149/1.3160373
   Google Scholar
• Y.-S. Choi, S. Nesic and S. Ling: ‘Effect of H2S on the CO2 corrosion of carbon steel in acidic solutions’, Electrochim. Acta, 2011, 56, 1752–1760. doi: 10.1016/j.electacta.2010.08.049
   Web of Science ®Google Scholar
• W. Yan, J. Deng, P. Zhu and X. Xing: ‘Investigation of pH2S influence on 3% Cr tubing steel corrosion behaviours in CO2–H2S–Cl− environment’, Corr. Eng. Sci. Technol., 2015, 50, 525–532. doi: 10.1179/1743278215Y.0000000001
   Web of Science ®Google Scholar
• K.-L. J. Lee and S. Nesic: ‘The effect of trace amount of H2S on CO2 corrosion investigated by using the EIS technique’, in ‘NACE Corrosion’, Houston, 05630; 2005.
   Google Scholar
• Z. F. Yin, W. Z. Zhao, Z. Q. Bai, Y. R. Feng and W. J. Zhou: ‘Corrosion behavior of SM 80SS tube steel in stimulant solution containing H2S and CO2’, Electrochim. Acta, 2008, 53, 3690–3700. doi: 10.1016/j.electacta.2007.12.039
   Web of Science ®Google Scholar
• X. Huang, Y. Qi, C. Chen, H. Yu and G. Lu: ‘Effect of environmental factors on corrosion behaviour of L360QCS pipeline steel in H2S/CO2 environments’, Corr. Eng. Sci. Technol., 2015, 50, 169–177. doi: 10.1179/1743278215Y.0000000011
   Web of Science ®Google Scholar
• 4500-S2− Sulfide. American Public Health Association (APHA), 2012.
   Google Scholar
• D. W. Shoesmith, P. Taylor, M. G. Bailey and D. G. Owen: ‘The formation of ferrous monosulfide polymorphs during the corrosion of iron by aqueous hydrogen sulfide at 21°C’, J. Electrochem. Soc., 1980, 127, 1007–1015. doi: 10.1149/1.2129808
   Web of Science ®Google Scholar
• J. Zhang, Z. L. Wang, Z. M. Wang and X. Han: ‘Chemical analysis of the initial corrosion layer on pipeline steels in simulated CO2-enhanced oil recovery brines’, Corros. Sci., 2012, 65, 397–404. doi: 10.1016/j.corsci.2012.08.045
   Web of Science ®Google Scholar
• B. Ingham, M. Ko, N. Laycock, J. Burnell, P. Kappen, J. A. Kimpton and D. E. Williams: ‘In-situ synchrotron X-ray diffraction study of scale formation during CO2 corrosion of carbon steel in sodium and magnesium chloride solutions’, Corros. Sci., 2012, 56, 96–104. doi: 10.1016/j.corsci.2011.11.017
   Web of Science ®Google Scholar
• C. Bian, Z. M. Wang, X. Han, C. Chen and J. Zhang: ‘Electrochemical response of mild steel in ferrous ion enriched and CO2 saturated solutions’, Corros. Sci., 2015, 96, 42–51. doi: 10.1016/j.corsci.2015.03.015
   Web of Science ®Google Scholar
• N. Perini, P. G. Corradini, V. P. Nascimento, E. C. Passamani and M. B. J. G. Freitas: ‘Characterization of AISI 1005 corrosion films grown under cyclic voltammetry of low sulfide ion concentrations’, Corros. Sci., 2013, 74, 214–222. doi: 10.1016/j.corsci.2013.04.045
   Web of Science ®Google Scholar
• R. Nyborg, A. Dugstad and T. G. Martin: ‘Top of line corrosion with high CO2 and traces of H2S’, in ‘NACE Corrosion’, Atlanta, 09283; 2009.
   Google Scholar