Additive manufacturing – a general corrosion perspective

References

• Attaran M. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing. Bus Horiz. 2017;60:677–688. doi: 10.1016/j.bushor.2017.05.011
   Web of Science ®Google Scholar
• Zhang P, Liu Z. Physical-mechanical and electrochemical corrosion behaviors of additively manufactured Cr-Ni-based stainless steel formed by laser cladding. Mater Des. 2016;100:254–262. doi: 10.1016/j.matdes.2016.03.151
   Web of Science ®Google Scholar
• Cheruvathur S, Lass EA, Campbell CE. Additive manufacturing of 17-4 PH stainless steel: post-processing heat treatment to achieve uniform reproducible microstructure. JOM. 2016;68:930–942. doi: 10.1007/s11837-015-1754-4
   Web of Science ®Google Scholar
• Chen X, Li J, Cheng X, et al. Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing. Mat Sci Eng: A. 2018;715:307–314. doi: 10.1016/j.msea.2017.10.002
   Web of Science ®Google Scholar
• Williams DE, Newman RC, Song Q, et al. Passivity breakdown and pitting corrosion of binary alloys. Nature. 1991;350:216–219. doi: 10.1038/350216a0
   Web of Science ®Google Scholar
• Newman RC. W.R. Whitney award lecture: understanding the corrosion of stainless steel. Corrosion. 2001;57:1030–1041. doi: 10.5006/1.3281676
   Web of Science ®Google Scholar
• Leon A, Shirizly A, Aghion E. Corrosion behavior of AlSi10Mg alloy produced by additive manufacturing (AM) vs. its counterpart gravity cast alloy. Metals (Basel). 2016;6:148. doi: 10.3390/met6070148
   Web of Science ®Google Scholar
• Fuchs J, Schneider C, Enzinger N. Wire-based additive manufacturing using an electron beam as heat source. Weld World. 2018;62:267–275. doi: 10.1007/s40194-017-0537-7
   Web of Science ®Google Scholar
• Bargel H-J, Schulze G, Hilbrans H, et al. Werkstoffkunde. 9th ed. Heidelberg: Springer-Verlag; 2005.
   Google Scholar
• Shamsaei N, Yadollahi A, Bian L, et al. An overview of direct laser deposition for additive manufacturing; part II: mechanical behavior, process parameter optimization and control. Add Manufact. 2015;8:12–35. doi: 10.1016/j.addma.2015.07.002
   Web of Science ®Google Scholar
• Jeon S-H, Kim S-T, Lee I-S, et al. Effects of copper addition on the formation of inclusions and the resistance to pitting corrosion of high performance duplex stainless steels. Corros Sci. 2011;53:1408–1416. doi: 10.1016/j.corsci.2011.01.005
   Web of Science ®Google Scholar
• Gorsse S, Hutchinson C, Gouné M, et al. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys. Sci Technol Adv Mater. 2017;18:584–610. doi: 10.1080/14686996.2017.1361305
   PubMed Web of Science ®Google Scholar
• Maurice V, Marcus P. Structure, passivation and localized corrosion of metal surfaces. In: S-I Pyun, J-W Lee, editors. Progress in corrosion science and engineering I: progress in corrosion science and engineering I. New York, NY: Springer; 2010. p. 1–58.
   Google Scholar
• Marcus P, Maurice V. Passivity of metals and alloys, in: materials science and technology. New York: Wiley-VCH Verlag GmbH & Co. KGaA; 2006.
   Google Scholar
• Wei HL, Mazumder J, DebRoy T. Evolution of solidification texture during additive manufacturing. Sci Rep. 2015;5:16446. doi: 10.1038/srep16446
   PubMed Web of Science ®Google Scholar
• Kirka MM, Lee Y, Greeley DA, et al. Strategy for texture management in metals additive manufacturing. JOM. 2017;69:523–531. doi: 10.1007/s11837-017-2264-3
   Web of Science ®Google Scholar
• Zhang X, Zhou X, Hashimoto T, et al. Localized corrosion in AA2024-T351 aluminium alloy: transition from intergranular corrosion to crystallographic pitting. Mater Charact. 2017;130:230–236. doi: 10.1016/j.matchar.2017.06.022
   Web of Science ®Google Scholar
• Örnek C, Idris S, Reccagni P, et al. Atmospheric-induced stress corrosion cracking of grade 2205 duplex stainless steel – effects of 475°C embrittlement and process orientation. Metals (Basel). 2016;6:167. doi: 10.3390/met6070167
   Web of Science ®Google Scholar
• Örnek C, Engelberg DL. SKPFM measured volta potential correlated with strain localisation in microstructure to understand corrosion susceptibility of cold-rolled grade 2205 duplex stainless steel. Corros Sci. 2015;99:164–171. doi: 10.1016/j.corsci.2015.06.035
   Web of Science ®Google Scholar
• Kivisäkk U. Relation of room temperature creep and microhardness to microstructure and HISC. Mat Sci Eng: A. 2010;527:7684–7688. doi: 10.1016/j.msea.2010.08.035
   Web of Science ®Google Scholar
• Chai G, Ronneteg S, Kivisäkk U, et al. Mechanisms of hydrogen induced stress crack initiation and propagation in super duplex stainless steels. Steel Res Int. 2009;80:482–487.
   Web of Science ®Google Scholar
• Byrne G, Francis R, Warburton G. Hydrogen Induced Stress Cracking (HISC) resistance and improvement methods for super duplex stainless steels – Paper No. 6981, in: Corrosion 2016, NACE International, Vancouver, BC, Canada; 2016.
   Google Scholar
• Li C, Liu ZY, Fang XY, et al. Residual stress in metal additive manufacturing. Procedia CIRP. 2018;71:348–353. doi: 10.1016/j.procir.2018.05.039
   Google Scholar
• Zhao X, Iyer A, Promoppatum P, et al. Numerical modeling of the thermal behavior and residual stress in the direct metal laser sintering process of titanium alloy products. Add Manufact. 2017;14:126–136. doi: 10.1016/j.addma.2016.10.005
   Web of Science ®Google Scholar
• Almuaili FA, McDonald SA, Withers PJ, et al. Strain-induced reactivation of corrosion pits in austenitic stainless steel. Corros Sci. 2017;125:12–19. doi: 10.1016/j.corsci.2017.05.023
   Web of Science ®Google Scholar
• Örnek C, Engelberg DL. Towards understanding the effect of deformation mode on stress corrosion cracking susceptibility of grade 2205 duplex stainless steel. Mat Sci Eng: A. 2016;666:269–279. doi: 10.1016/j.msea.2016.04.062
   Web of Science ®Google Scholar
• Mukherjee T, Zhang W, DebRoy T. An improved prediction of residual stresses and distortion in additive manufacturing. Comput Mater Sci. 2017;126:360–372. doi: 10.1016/j.commatsci.2016.10.003
   Web of Science ®Google Scholar
• Örnek C, Engelberg DL. An experimental investigation into strain and stress partitioning of duplex stainless steel using digital image correlation, X-ray diffraction and scanning Kelvin probe force microscopy. J Strain Anal Eng Design. 2016;51:207–219. doi: 10.1177/0309324716631669
   Web of Science ®Google Scholar