References
- Oh JC, Ohkubo T, Mukai T, et al. TEM and 3DAP characterization of an age-hardened Mg–Ca–Zn alloy. Scr Mater. 2005;53:675–679. DOI:10.1016/j.scriptamat.2005.05.030.
- Pops H. The metallurgy of copper wire; 1997.
- Medraj M. Intermetallics critical assessment and thermodynamic modeling of the binary Mg–Zn, Ca–Zn and ternary Mg–Ca–Zn systems. Intermetallics. 2009;17:847–864. DOI:10.1016/j.intermet.2009.03.014.
- Yu Sun XJ, Zhang B, Wang Y, et al. Preparation and characterization of a new biomedical Mg–Zn–Ca alloy. Mater. Des. 2012;34:58–64. DOI:10.1016/j.matdes.2011.07.058.
- Witte F. The history of biodegradable magnesium implants : a review. Acta Biomater. 2010;6:1680–1692. DOI:10.1016/j.actbio.2010.02.028.
- Jamesh M, Kumar S, Narayanan TSNS. Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – long term evaluation by EIS. Corros Sci. 2011;53:645–654. DOI:10.1016/j.corsci.2010.10.011.
- Shaw BA, Sikora E, Virtanen S. Fix, heal, and disappear: a new approach to using metals in the human body. Electrochem. Soc. Interface. 2008;17:45–49.
- Xu L, Yu G, Zhang E, et al. In vivo corrosion behavior of Mg-Mn-Zn alloy for bone implant application. J Biomed Mater Res A. . 2007;83:703–711. DOI:10.1002/jbm.a doi: 10.1002/jbm.a.31273
- Kannan MB, Raman RKS. In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid. Biomaterials. 2008;29:2306–2314. DOI:10.1016/j.biomaterials.2008.02.003.
- Li Z, Gu X, Lou S, et al. The development of binary Mg-Ca alloys for use as biodegradable materials within bone. Biomaterials. 2008;29:1329–1344. DOI:10.1016/j.biomaterials.2007.12.021.
- Zhang S, Zhang X, Zhao C, et al. Research on an Mg-Zn alloy as a degradable biomaterial. Acta Biomater. 2010;6:626–640. DOI:10.1016/j.actbio.2009.06.028.
- Witte F, Hort N, Vogt C, et al. Degradable biomaterials based on magnesium corrosion. Curr Opin Solid State Mater Sci. 2008;12:63–72. DOI:10.1016/j.cossms.2009.04.001.
- Nassif N, Ghayad I. Corrosion protection and surface treatment of magnesium alloys used for orthopedic applications. Adv. Mater. Sci. Eng. 2013;2013:1–10. doi: 10.1155/2013/532896
- Zhou P, Gong HR. Phase stability, mechanical property, and electronic structure of an Mg–Ca system. J Mech Behav Biomed Mater. 2012;8:154–164. DOI:10.1016/j.jmbbm.2011.12.001.
- He W, Zhang E, Yang K. Effect of Y on the bio-corrosion behavior of extruded Mg–Zn–Mn alloy in Hank’s solution. Mater Sci Eng C. 2010;30:167–174. DOI:10.1016/j.msec.2009.09.014.
- Yang M, Liang X, Yi Z, et al. Effects of zirconium addition on as-cast microstructure and mechanical properties of Mg–3Sn–2Ca magnesium alloy. Mater Des. 2011;32:1967–1973. DOI:10.1016/j.matdes.2010.11.071.
- Babilas R, Bajorek A, Włodarczyk P, et al. Effect of Au addition on the corrosion activity of Ca-Mg-Zn bulk metallic glasses in Ringer’s solution. Mater Chem Phys. 2019;226:51–58. DOI:10.1016/j.matchemphys.2018.12.088.
- Liu X, Sun J, Qiu K, et al. Effects of alloying elements (Ca and Sr) on microstructure, mechanical property and in vitro corrosion behavior of biodegradable Zn-1.5Mg alloy. J Alloys Compd. 2016;664:444–452. DOI:10.1016/j.jallcom.2015.10.116.
- Wang H, Guan S, Wang Y, et al. In vivo degradation behavior of Ca-deficient hydroxyapatite coated Mg-Zn-Ca alloy for bone implant application. Colloids Surf B Biointerfaces. 2011;88:254–259. DOI:10.1016/j.colsurfb.2011.06.040.
- Bakhsheshi-Rad HR, Idris MH, Kadir MRA, et al. Effect of fluoride treatment on corrosion behavior of Mg-Ca binary alloy for implant application. Trans Nonferrous Met Soc China (English Ed.). 2013;23:699–710. DOI:10.1016/S1003-6326(13)62519-4.
- Pan Y, Wang S, Chen C, et al. In vitro degradation and electrochemical corrosion evaluations of microarc oxidized pure Mg, Mg–Ca and Mg–Ca–Zn alloys for biomedical applications. Mater Sci Eng C. 2014;47:85–96. DOI:10.1016/j.msec.2014.11.048.
- Iskandar ME, Aslani A, Liu H. The effects of nanostructured hydroxyapatite coating on the biodegradation and cytocompatibility of magnesium implants. J Biomed Mater Res – Part A. 2013;101 A:2340–2354. DOI:10.1002/jbm.a.34530.
- Wen C, Guan S, Peng L, et al. Characterization and degradation behavior of AZ31 alloy surface modified by bone-like hydroxyapatite for implant applications. Appl Surf Sci. 2009;255:6433–6438. DOI:10.1016/j.apsusc.2008.09.078.
- Bakhsheshi-Rad HR, Hamzah E, Ismail AF, et al. Preparation and characterization of NiCrAlY/nano-YSZ/PCL composite coatings obtained by combination of atmospheric plasma spraying and dip coating on Mg-Ca alloy. J Alloys Compd. 2016;658:440–452. DOI:10.1016/j.jallcom.2015.10.196.
- Pan Y, Chen C, Wang D, et al. Dissolution and precipitation behaviors of silicon-containing ceramic coating on Mg-Zn-Ca alloy in simulated body fluid. Colloids Surf B Biointerfaces. 2014;122:746–751. DOI:10.1016/j.colsurfb.2014.08.012.
- Li QF, Weng HR, Suo ZY, et al. Microstructure and mechanical properties of bulk Mg-Zn-Ca amorphous alloys and amorphous matrix composites. Mater Sci Eng A. 2008;487:301–308. DOI:10.1016/j.msea.2007.10.027.
- Ramya M, Sarwat SG, Udhayabanu V, et al. Role of partially amorphous structure and alloying elements on the corrosion behavior of Mg-Zn-Ca bulk metallic glass for biomedical applications. Mater Des. 2015;86:829–835. DOI:10.1016/j.matdes.2015.07.154.
- Li H, Pang S, Liu Y, et al. In vitro investigation of Mg-Zn-Ca-Ag bulk metallic glasses for biomedical applications. J Non Cryst Solids. 2015;427:134–138. DOI:10.1016/j.jnoncrysol.2015.07.043.
- Gu X, Zheng Y, Zhong S, et al. Corrosion of, and cellular responses to Mg-Zn-Ca bulk metallic glasses. Biomaterials. 2010;31:1093–1103. DOI:10.1016/j.biomaterials.2009.11.015.
- Loffler YF. Bulk metallic glasses. Intermetallics. 2003;11:529–540. DOI:10.1016/S0966-9795(03)00046-3.
- Wang WH, Dong C, Shek CH. Bulk metallic glasses. Mater. Sci. Eng. R Rep. 2004;44:45–89. DOI:10.1016/j.mser.2004.03.001.
- Gebert A, Wolff U, John A, et al. Stability of the bulk glass-forming Mg65Y10Cu25 alloy in aqueous electrolytes. Mater. Sci. Eng. A. 2001;299:125–135. doi: 10.1016/S0921-5093(00)01401-5
- Schuh CA, Hufnagel TC, Ramamurty U. Mechanical behavior of amorphous alloys. Acta Mater. 2007;55:4067–4109. DOI:10.1016/j.actamat.2007.01.052.
- Wang Y, Tan M, Pang J, et al. In vitro corrosion behaviors of Mg67Zn28Ca5 alloy : from amorphous to crystalline. Mater Chem Phys. 2012;134:1079–1087. DOI:10.1016/j.matchemphys.2012.03.116.
- Liu FX, Green BA, Choo H, et al. Electrochemical corrosion behavior of a Zr-based bulk-metallic glass. Appl Phys Lett. 2007;91; DOI:10.1063/1.2762282.
- Xin R, Leng Y, Chen J, et al. A comparative study of calcium phosphate formation on bioceramics in vitro and in vivo. Biomaterials. 2005;26:6477–6486. DOI:10.1016/j.biomaterials.2005.04.028.