Electrochemical study of the surface metal matrix composite developed on AA 2024-T351 by the friction stir process

References

• Mishra RS, Ma ZY. Friction stir welding and processing. Mater Sci Eng R Reports. 2005;50:1–78. doi: 10.1016/j.mser.2005.07.001
   Web of Science ®Google Scholar
• Gandra J, Vigarinho P, Pereira D, et al. Wear characterization of functionally graded Al–SiC composite coatings produced by friction Surfacing. Mater Des 2013;52:373–383. doi: 10.1016/j.matdes.2013.05.059
   Web of Science ®Google Scholar
• Mahmoud ERI, Takahashi M, Shibayanagi T, et al. Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing. Wear. 2010;268:1111–1121. doi: 10.1016/j.wear.2010.01.005
   Web of Science ®Google Scholar
• Ma Y, Zhou X, Liao Y, et al. Localised corrosion in AA 2099-T83 aluminium-lithium alloy: The role of grain orientation. Corros Sci 2016;107:41–48. doi: 10.1016/j.corsci.2016.02.018
   Web of Science ®Google Scholar
• Deepak D, Sidhu RS, Gupta VK. Preparation of 5083 Al-SiC surface composite by friction stir processing and its mechanical characterization. Int J Mech Eng 2013;3:1–11.
   Google Scholar
• Sahandi Zangabad P, Khodabakhshi F, Simchi A, et al. Fatigue fracture of friction-stir processed Al–Al3Ti–MgO hybrid nanocomposites. Int J Fatigue. 2016;87:266–278. doi: 10.1016/j.ijfatigue.2016.02.007
   Web of Science ®Google Scholar
• Shafiei-Zarghani A, Kashani-Bozorg SF, Zarei-Hanzaki A. Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing. Mater Sci Eng A. 2009;500:84–91. doi: 10.1016/j.msea.2008.09.064
   Web of Science ®Google Scholar
• Dhayalan R, Kalaiselvan K, Sathiskumar R. Characterization of AA6063/SiC-Gr surface composites produced by FSP technique. Procedia Eng 2014;97:625–631. doi: 10.1016/j.proeng.2014.12.291
   Google Scholar
• Du Z, Tan MJ, Guo JF, et al. Fabrication of a new Al-Al2O3-CNTs composite using friction stir processing (FSP). Mater Sci Eng A. 2016;667:125–131. doi: 10.1016/j.msea.2016.04.094
   Web of Science ®Google Scholar
• Palanivel R, Dinaharan I, Laubscher RF, et al. Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB2 hybrid aluminum composites synthesized by friction stir processing. JMADE. 2016;106:195–204.
   Google Scholar
• Mishra RS, Ma ZY, Charit I. Friction stir processing: a novel technique for fabrication of surface composite. Mater Sci Eng A. 2003;341:307–310. doi: 10.1016/S0921-5093(02)00199-5
   Web of Science ®Google Scholar
• Wang W, yu Shi Q, Liu P, et al. A novel way to produce bulk SiCp reinforced aluminum metal matrix composites by friction stir processing. J Mater Process Technol 2009;209:2099–2103. doi: 10.1016/j.jmatprotec.2008.05.001
   Web of Science ®Google Scholar
• Devaraju A, Kumar A, Kumaraswamy A, et al. Wear and mechanical properties of 6061-T6 aluminum alloy surface hybrid composites [(SiC+Gr) and (SiC+Al2O3)] fabricated by friction stir processing. J Mater Res Technol 2013;2:362–369. doi: 10.1016/j.jmrt.2013.10.004
   Google Scholar
• Guillaumin V, Mankowski G. Localized corrosion of 2024 T351 aluminium alloy in chloride media. Corros Sci 1998;41:421–438. doi: 10.1016/S0010-938X(98)00116-4
   Web of Science ®Google Scholar
• DeRose JA, Suter T, Bałkowiec A, et al. Localised corrosion initiation and microstructural characterisation of an Al 2024 alloy with a higher Cu to Mg ratio. Corros Sci 2012;55:313–325. doi: 10.1016/j.corsci.2011.10.035
   Web of Science ®Google Scholar
• Zaki Ahmad M, Abdul Aleem B. In: Z Ahmad, editor. New trends in Casting, welding and environmental degradation of aluminium alloys. London: InTech; 2011. p. 385–406.
   Google Scholar
• Trowsdale AJ, Noble B, Harris SJ, et al. The influence of silicon carbide reinforcement on the pitting behaviour of aluminium. Corros Sci 1996;38:177–191. doi: 10.1016/0010-938X(96)00098-4
   Web of Science ®Google Scholar
• Tiwari S, Balasubramaniam R, Gupta M. Corrosion behavior of SiC reinforced magnesium composites. Corros Sci 2007;49:711–725. doi: 10.1016/j.corsci.2006.05.047
   Web of Science ®Google Scholar
• Mosleh-Shizardi S, Akhalaghi F, Li DY. Effect of SiC content on dry sliding wear, corrosion and corrosive wear of Al/SiC nanocomposites. Trans Nonferrous Met Soc China (English Ed) 2016;26:1801–1808. doi: 10.1016/S1003-6326(16)64294-2
   Web of Science ®Google Scholar
• Yue TM, Wu YX, Man HC. On the role of CuAl2 precipitates in pitting corrosion of aluminium 2009/SiCW metal matrix composite. J Mater Sci Lett 2000;19:1003–1006. doi: 10.1023/A:1006745028307
   Google Scholar
• Zakaria HM. Microstructural and corrosion behavior of Al/SiC metal matrix composites. Ain Shams Eng J 2014;5:831–838. doi: 10.1016/j.asej.2014.03.003
   Google Scholar
• Candan S. Effect of SiC particle size on corrosion behavior of pressure infiltrated Al matrix composites in a NaCl solution. Mater Lett 2004;58:3601–3605. doi: 10.1016/j.matlet.2004.06.053
   Web of Science ®Google Scholar
• Fonda RW, Knipling KE, Bingert JF. Microstructural evolution ahead of the tool in aluminum friction stir welds. Scr Mater 2008;58:343–348. doi: 10.1016/j.scriptamat.2007.09.063
   Web of Science ®Google Scholar
• Abreu CM, Acuña R, Cabeza M, et al. Microstructure and mechanical properties of Al/SiC composite surface layer produced by friction stir processing. Cienc e Tecnol dos Mater. 2017;29:82–86.
   Web of Science ®Google Scholar
• Boag A, Hughes AE, Wilson NC, et al. How complex is the microstructure of AA2024-T3? Corros Sci 2009;51:1565–1568. doi: 10.1016/j.corsci.2009.05.001
   Web of Science ®Google Scholar
• Hughes AE, Glenn AM, Wilson N, et al. A consistent description of intermetallic particle composition: An analysis of ten batches of AA2024-T3. Surf Interface Anal 2013;45:1558–1563. doi: 10.1002/sia.5207
   Web of Science ®Google Scholar
• Seidel TU, Reynolds AP. Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique. Metall Mater Trans A. 2001;32:2879–2884. doi: 10.1007/s11661-001-1038-1
   Web of Science ®Google Scholar
• Johannes LB, Charit I, Mishra RS, et al. Enhanced superplasticity through friction stir processing in continuous cast AA5083 aluminum. Mater Sci Eng A. 2007;464:351–357. doi: 10.1016/j.msea.2007.02.012
   Web of Science ®Google Scholar
• Sato YS, Kokawa H, Enomoto M, et al. Microstructural evolution of 6063 aluminum during friction-stir welding. Metall Mater Trans A. 1999;30:2429–2437. doi: 10.1007/s11661-999-0251-1
   Web of Science ®Google Scholar
• Genevois C, Deschamps A, Denquin A, et al. Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds. Acta Mater 2005;53:2447–2458. doi: 10.1016/j.actamat.2005.02.007
   Web of Science ®Google Scholar
• Augustin C, Andrieu E, Blan C, et al. Intergranular corrosion of 2024 alloy in chloride solutions. J Electrochem Soc 2007;154:C637–C644. doi: 10.1149/1.2778224
   Web of Science ®Google Scholar
• Ferrell RT, Himmelblau DM. Diffusion coefficients of nitrogen and oxygen in water. J Chem Eng Data. 1967;12:111–115. doi: 10.1021/je60032a036
   Web of Science ®Google Scholar
• McCafferty E. Introduction to corrosion science. New York (NY): Springer; 2010.
   Google Scholar
• Abreu CM, Cabeza M, Feijoo I. Surf Interface Anal; DOI:10.1002/sia.5931.
   Google Scholar
• Zhou X, Luo C, Hashimoto T, et al. Study of localized corrosion in AA2024 aluminium alloy using electron tomography. Corros Sci 2012;58:299–306. doi: 10.1016/j.corsci.2012.02.001
   Web of Science ®Google Scholar
• Shao M, Fu Y, Hu R, et al. A study on pitting corrosion of aluminum alloy 2024-T3 by scanning microreference electrode technique. Mater Sci Eng A. 2003;344:323–327. doi: 10.1016/S0921-5093(02)00445-8
   Web of Science ®Google Scholar
• Dimitrov N, Mann JA, Vukmirovic M, et al. Dealloying of Al2CuMg in Alkaline media. J Electrochem Soc 2000;147:3283–3285. doi: 10.1149/1.1393896
   Web of Science ®Google Scholar
• King PC, Cole IS, Corrigan PA, et al. FIB/SEM study of AA2024 corrosion under a seawater drop: Part I. Corros Sci 2011;53:1086–1096. doi: 10.1016/j.corsci.2010.12.004
   Web of Science ®Google Scholar
• King PC, Cole IS, Corrigan PA, et al. FIB/SEM study of AA2024 corrosion under a seawater drop, part II. Corros Sci 2012;55:116–125. doi: 10.1016/j.corsci.2011.10.012
   Web of Science ®Google Scholar
• Schmutz P, Frankel GS. Characterization of AA2024-T3 by scanning Kelvin probe Force microscopy. J Electrochem Soc 1998;145:2285. doi: 10.1149/1.1838633
   Web of Science ®Google Scholar
• Leblanc P, Frankel GS. A study of corrosion and pitting initiation of AA2024-T3 using Atomic Force microscopy. J Electrochem Soc 2002;149:B239. doi: 10.1149/1.1471546
   Web of Science ®Google Scholar
• Hashimoto T, Zhang X, Zhou X, et al. Investigation of dealloying of S phase (Al2CuMg) in AA 2024-T3 aluminium alloy using high resolution 2D and 3D electron imaging. Corros Sci. 2016;103:157–164. doi: 10.1016/j.corsci.2015.11.013
   Web of Science ®Google Scholar
• Boag A, Taylor RJ, Muster TH, et al. Stable pit formation on AA2024-T3 in a NaCl environment. Corros Sci 2010;52:90–103. doi: 10.1016/j.corsci.2009.08.043
   Web of Science ®Google Scholar
• Jorcin J-B, Blanc C, Pébère N, et al. Galvanic coupling between pure copper and pure aluminum. J Electrochem Soc 2008;155:C46–C51. doi: 10.1149/1.2803506
   Web of Science ®Google Scholar
• Buchheit RG. Local dissolution phenomena associated with S phase (Al2CuMg) particles in Aluminum alloy 2024-T3. J Electrochem Soc 1997;144:2621. doi: 10.1149/1.1837874
   Web of Science ®Google Scholar
• Collazo A, Hernández M, Nóvoa XR, et al. Effect of the addition of thermally activated hydrotalcite on the protective features of sol–gel coatings applied on AA2024 aluminium alloys. Electrochim Acta. 2011;56:7805–7814. doi: 10.1016/j.electacta.2011.03.067
   Web of Science ®Google Scholar
• Abreu CM, Cristóbal MJ, Figueroa R, et al. Wear and corrosion performance of two different tempers (T6 and T73) of AA7075 aluminium alloy after nitrogen implantation. Appl Surf Sci. 2015;327:51–61. doi: 10.1016/j.apsusc.2014.11.111
   Web of Science ®Google Scholar
• Godino N, Borrise X, Muñoz FX, et al. Mass transport to nanoelectrode arrays and limitations of the diffusion domain approach: Theory and experiment. J Phys Chem C. 2009;113:11119–11125. doi: 10.1021/jp9031354
   Web of Science ®Google Scholar
• Tesfaye AT, Yücel YD, Barr MKS, et al. The electrochemical behavior of SnSb as an anode for Li-ion Batteries studied by electrochemical impedance spectroscopy and electron microscopy. Electrochim Acta. 2017;256:155–161. doi: 10.1016/j.electacta.2017.10.031
   Web of Science ®Google Scholar
• Cattarin S, Flechter S, Pettenkofer C, et al. Interfacial Reactivity and oscillating behavior of chalcopyrite cathodes during H2O2 reduction. J Electrochem Soc 1990;137:3484–3493. doi: 10.1149/1.2086254
   Web of Science ®Google Scholar
• Guitián B, Nóvoa XR, Puga B. Electrochemical impedance spectroscopy as a tool for materials selection: water for haemodialysis. Electrochim Acta. 2011;56:7772–7779. doi: 10.1016/j.electacta.2011.03.055
   Web of Science ®Google Scholar