References
- Carpenter M, Aarnes J, Coleman D, et al. Guideline for the risk management of existing wells at CO2 geological storage sites, DNV Report No.: 2011-0448, 2011.
- DeBerry DW, Clark WS, Yost A. Corrosion due to use of carbon dioxide for enhanced oil recovery, DOE Final Report, SumX Corporation, Austin, Texas, 1979, p. MC/08442.
- Singh R. Enhanced oil recovery and CO2 corrosion - a challenge, 2010 China International Pipeline Forum, Langfang, China, 2010, pp. 162–171.
- Leach A, Mason CF, van’t Veld K. Co-optimization of enhanced oil recovery and carbon sequestration. Resour Energy Econ. 2011;33:893–912. doi: 10.1016/j.reseneeco.2010.11.002
- Lv G, Li Q, Wang S, et al. Key techniques of reservoir engineering and injection-production process for CO2 flooding in China’s SINOPEC Shengli oilfield. J CO2 Util. 2015;11:31–40. doi: 10.1016/j.jcou.2014.12.007
- Wang ZM, Liu XT, Han X, et al. Managing internal corrosion of mild steel pipelines in CO2 enhanced oil recovery multiphase flow conditions. Eng Technol. 2015;3(3):225–233.
- Choi Y-S, Nešić S. Determining the corrosive potential of CO2 transport pipeline in high pCO2–water environments. Int J Greenhouse Gas Control. 2011;5:788–797. doi: 10.1016/j.ijggc.2010.11.008
- Choi HJ, Cepulis RL, Lee JB. Carbon dioxide corrosion of L80 grade tubular in flowing oil-brine two-phase environments. Corrosion. 1989;45:943–950. doi: 10.5006/1.3585005
- Efird KD, Jasinski RJ. Effect of the crude oil on corrosion of steel in crude oil/brine production. Corrosion. 1989;45:165–171. doi: 10.5006/1.3577835
- Lotz U, Bodegom LV, Ouwehand C. The effect of type of oil or gas condensate on carbonic acid corrosion. Corrosion. 1991;47:635–645. doi: 10.5006/1.3585301
- Heuer JK, Stubbins JF. Microstructure analysis of coupons exposed to carbon dioxide corrosion in multiphase flow. Corrosion. 1998;54:566–575. doi: 10.5006/1.3284885
- De Waard C, Smith LM, Craig BD. The influence of crude oils on well tubing corrosion rates, NACE Corrosion 03629, 2003.
- Papavinasam S, Doiron A, Panneerselvam T, et al. Effect of hydrocarbons on the internal corrosion of oil and gas pipelines. Corrosion. 2007;63:704–712. doi: 10.5006/1.3278419
- Wang ZL, Zhang J, Wang ZM, et al. Emulsification reducing the corrosion risk of mild steel in oil-brine mixtures. Corros Sci. 2014;86:310–317. doi: 10.1016/j.corsci.2014.06.009
- Farelas F, Choi Y-S, Nesic S. Corrosion behavior of deep water oil production tubing material under supercritical CO2 environment: Part 2. Effect of crude oil and flow, NACE Corrosion 2013, p. 2381.
- Sun J, Sun C, Zhang G, et al. Effect of water cut on the localized corrosion behavior of P110 tube steel in supercritical CO2/oil/water environment. Corrosion. 2016;72:1470–1482. doi: 10.5006/1926
- Carew JA, Al-Sayegh A, Al-Hashem A. The effect of water-cut on the corrosion behaviour L80 carbon steel under downhole conditions, NACE Corrosion, 2000, p. 00061.
- Craig BD. Corrosion in oil/water systems. Mater Perform. 1996;35(8):61–62.
- Wang ZM, Zhang J. Corrosion of multiphase flow pipelines: the impact of crude oil. Corros Rev. 2016;34(1–2):17–40. doi: 10.1515/corrrev-2015-0053
- Wicks M, Fraser JP. Entrainment of water by flowing oil. Mater Perform. 1975;14(9):9–12.
- Cai JY, Li C, Tang XP, et al. Experimental study of water wetting in oil–water two phase flow—horizontal flow of model oil. Chem Eng Sci. 2012;73:334–344. doi: 10.1016/j.ces.2012.01.014
- Paolinelli LD, Nesic S. Hydrodynamic and phase wetting criteria to assess corrosion risk in two-phase oil-water pipe flow, NACE Corrosion, NACE International, Vancouver, 2016, p. 7408.
- Groysman A, Erdman N. A study of corrosion of mild steel in mixtures of petroleum distillates and electrolytes. Corrosion. 2000;56:1266–1271. doi: 10.5006/1.3280515
- Zhang J, Wang ZL, Wang ZM, et al. Chemical analysis of the initial corrosion layer on pipeline steels in simulated CO2-enhanced oil recovery brines. Corros Sci. 2012;65:397–404. doi: 10.1016/j.corsci.2012.08.045
- Liu AQ, Bian C, Wang ZM, et al. Flow dependence of steel corrosion in supercritical CO2 environments with different water concentrations. Corros Sci. 2018;134:149–161. doi: 10.1016/j.corsci.2018.02.027
- Wang ZM, Song G-L. An analytical model for the corrosion risk of water alternating gas injection wells in CO2 enhanced oil recovery. Adv Theory Simul. 2018;1(7):1800041. doi: 10.1002/adts.201800041
- Zhang Y, Pang X, Qu S, et al. Discussion of the CO2 corrosion mechanism between low partial pressure and supercritical condition. Corros Sci. 2012;59:186–197. doi: 10.1016/j.corsci.2012.03.006
- Wang ZM, Han X, Zhang J, et al. In-situ observation of CO2 corrosion under high pressure. Corros Eng Sci Tech. 2014;49:352–356. doi: 10.1179/1743278213Y.0000000144
- Hua Y, Barker R, Charpentier T, et al. Relating iron carbonate morphology to corrosion characteristics for water-saturated supercritical CO2 systems. J Supercrit Fluids. 2015;98:183–193. doi: 10.1016/j.supflu.2014.12.009
- Huet F, Nogueira RP. Comparative analysis of potential, current, and electrolyte resistance fluctuations in two-phase oil/water mixtures. Corrosion. 2003;59:747–755. doi: 10.5006/1.3277603
- Wang ZM, Lun QY, Wang J, et al. Corrosion mitigation behavior of an alternately wetted steel electrode in oil/water media. Corros Sci. 2019;152:140–152. doi: 10.1016/j.corsci.2019.03.008
- Jasinski R, Efird KD. Electrochemical corrosion probe for high resistivity hydrocarbon/water mixtures. Corrosion. 1988;44:658–663. doi: 10.5006/1.3584980
- Nesic S, Carroll F. Horizontal rotating cylinder-A compact apparatus for studying the effect of water wetting on carbon dioxide corrosion of mild steel. Corrosion. 2003;59:1085–1095. doi: 10.5006/1.3277528
- Tan YJ, Bailey S, Kinsella B. Mapping non-uniform corrosion using the wire beam electrode method: I. Multi-phase carbon dioxide corrosion. Corros Sci. 2001;43:1905–1918. doi: 10.1016/S0010-938X(00)00190-6
- Gui F, James J, Sridhar N. Corrosion study of carbon steel in biodiesel and water mixture using multielectrode array. Corrosion. 2012;68:827–834. doi: 10.5006/0591
- De Motte RA, Barker R, Burkle D, et al. The early stages of FeCO3 scale formation kinetics in CO2 corrosion. Mater Chem Phys. 2018;216:102–111. doi: 10.1016/j.matchemphys.2018.04.077
- Barker R, Burkle D, Charpentier T, et al. A review of iron carbonate (FeCO3) formation in the oil and gas industry. Corros Sci. 2018;142:312–341. doi: 10.1016/j.corsci.2018.07.021
- Sjoblom J, Aske N, Auflem IH, et al. Our current understanding of water-in-crude oil emulsions. Recent characterization techniques and high pressure performance. Adv Colloid Interfac. 2003;100:399–473. doi: 10.1016/S0001-8686(02)00066-0
- Aichele CP, Chapman WG, Rhyne LD, et al. Nuclear magnetic resonance analysis of methane hydrate formation in water-in-oil emulsions. Energy Fuels. 2009;23(1–2):835–841. doi: 10.1021/ef800815b
- Clausse D, Gomez E, Dalmazzone C, et al. A method for the characterization of emulsions, thermogranulometry: application to water-in-crude oil emulsion. J Colloid Interface Sci. 2005;287(2):694–703. doi: 10.1016/j.jcis.2005.02.042
- Vanapalli SA, Palanuwech J, Coupland JN. Stability of emulsions to dispersed phase crystallization: effect of oil type, dispersed phase volume fraction, and cooling rate. Colloid Surface A. 2002;204(1–3):227–237. doi: 10.1016/S0927-7757(01)01135-9
- Kang WL, Guo LM, Fan HM, et al. Flocculation, coalescence and migration of dispersed phase droplets and oil-water separation in heavy oil emulsion. J Pet Sci Eng. 2012;81:177–181. doi: 10.1016/j.petrol.2011.12.011
- Kokal S. Crude-oil emulsions: a stat-of-the-art review. SPE Prod Facil. 2005;20:5–13. doi: 10.2118/77497-PA
- Xu XX. Study on oil–water two-phase flow in horizontal pipelines. J Pet Sci Eng. 2007;59:43–58. doi: 10.1016/j.petrol.2007.03.002
- Wang ZM, Song G-L, Zhang J. Corrosion control in CO2 enhanced oil recovery from a perspective of multiphase fluids. Front Mater. 2019;6:272. doi: 10.3389/fmats.2019.00272