References
- Guérin M, Andrieu E, Odemer G, et al. Effect of varying conditions of exposure to an aggressive medium on the corrosion behavior of the 2050 Al–Cu–Li alloy. Corros Sci. 2014;85:455–470. doi:https://doi.org/10.1016/j.corsci.2014.04.042.
- Liu J, Zhao K, Yu M, et al. Effect of surface abrasion on pitting corrosion of Al-Li alloy. Corros Sci. 2018;138:75–84. doi:https://doi.org/10.1016/j.corsci.2018.04.010.
- Li JF, Li CX, Peng ZW, et al. Corrosion mechanism associated with T1 and T2 precipitates of Al–Cu–Li alloys in NaCl solution. J Alloys Compd. 2008;460(1–2):688–693. doi:https://doi.org/10.1016/j.jallcom.2007.06.072.
- Li J, Zheng Z, Ren W, et al. Simulation on function mechanism of T1(Al2CuLi) precipitate in localized corrosion of Al-Cu-Li alloys. Trans Nonferrous Met Soc China. 2006;16(6):1268–1273. doi:https://doi.org/10.1016/s1003-6326(07)60005-3.
- Proton V, Alexis J, Andrieu E, et al. Characterisation and understanding of the corrosion behaviour of the nugget in a 2050 aluminium alloy friction stir welding joint. Corros Sci. 2013;73:130–142. doi:https://doi.org/10.1016/j.corsci.2013.04.001.
- Guérin M, Alexis J, Andrieu E, et al. Identification of the metallurgical parameters explaining the corrosion susceptibility in a 2050 aluminium alloy. Corros Sci. 2016;102:291–300. doi:https://doi.org/10.1016/j.corsci.2015.10.020.
- Ma Y, Zhou X, Liao Y, et al. Localised corrosion in AA 2099-T83 aluminium-lithium alloy: The role of grain orientation. Corros Sci. 2016;107:41–48. doi:https://doi.org/10.1016/j.corsci.2016.02.018.
- Li N, Dong C, Man C, et al. Insight into the localized strain effect on micro-galvanic corrosion behavior in AA7075-T6 aluminum alloy. Corros Sci. 2020: 109174. doi:https://doi.org/10.1016/j.corsci.2020.109174.
- Kertz JE, Gouma PI, Buchheit RG. Localized corrosion susceptibility of Al-Li-Cu-Mg-Zn alloy AF/C458 due to interrupted quenching from solutionizing temperature. Metall Mater Trans A. 2001;32(10):2561–2573. doi:https://doi.org/10.1007/s11661-001-0046-5.
- Marlaud T, Malki B, Henon C, et al. Relationship between alloy composition, microstructure and exfoliation corrosion in Al–Zn–Mg–Cu alloys. Corros Sci. 2011;53(10):3139–3149. doi:https://doi.org/10.1016/j.corsci.2011.05.057.
- Moreto JA, Marino CEB, Bose Filho WW, et al. SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al–Li alloys used in aircraft fabrication. Corros Sci. 2014;84:30–41. doi:https://doi.org/10.1016/j.corsci.2014.03.001.
- Meng Q, Frankel GS. Effect of Cu content on corrosion behavior of 7xxx series aluminum alloys. J Electrochem Soc. 2004;151(5):B271, doi:https://doi.org/10.1149/1.1695385.
- Wadeson DA, Zhou X, Thompson GE, et al. Corrosion behaviour of friction stir welded AA7108 T79 aluminium alloy. Corros Sci. 2006;48(4):887–897. doi:https://doi.org/10.1016/j.corsci.2005.02.020.
- Wloka J, Virtanen S. Detection of nanoscale η-MgZn2phase dissolution from an Al-Zn-Mg-Cu alloy by electrochemical microtransients. Surf Interface Anal. 2008;40(8):1219–1225. doi:https://doi.org/10.1002/sia.2868.
- Andreatta F. Local electrochemical behaviour of 7xxx aluminium alloys. 2004.
- Ikeuba AI, Zhang B, Wang J, et al. SVET and SIET study of galvanic corrosion of Al/MgZn2in aqueous solutions at different pH. J Electrochem Soc. 2018;165(3):C180–C194. doi:https://doi.org/10.1149/2.0861803jes.
- Knight SP, Salagaras M, Trueman AR. The study of intergranular corrosion in aircraft aluminium alloys using X-ray tomography. Corros Sci. 2011;53(2):727–734. doi:https://doi.org/10.1016/j.corsci.2010.11.005.
- Huang LP, Chen KH, Li S, et al. Influence of high-temperature pre-precipitation on local corrosion behaviors of Al–Zn–Mg alloy. Scr Mater. 2007;56(4):305–308. doi:https://doi.org/10.1016/j.scriptamat.2006.09.028.
- Birbilis N, Buchheit RG. Electrochemical characteristics of intermetallic phases in aluminum alloys. J Electrochem Soc. 2005;152(4):B140. doi:https://doi.org/10.1149/1.1869984.
- Lequeu P, Smith KP, Daniélou A. Aluminum-Copper-Lithium alloy 2050 developed for medium to thick plate. J Mater Eng Perform. 2009;19(6):841–847. doi:https://doi.org/10.1007/s11665-009-9554-z.
- He J, Gelling VJ, Tallman DE, et al. A scanning vibrating electrode study of chromated-epoxy primer on steel and aluminum. J Electrochem Soc. 2000;147(10):3661. doi:https://doi.org/10.1149/1.1393955.
- Souto RM, González-García Y, Bastos AC, et al. Investigating corrosion processes in the micrometric range: A SVET study of the galvanic corrosion of zinc coupled with iron. Corros Sci. 2007;49(12):4568–4580. doi:https://doi.org/10.1016/j.corsci.2007.04.016.
- de Sousa Araujo JV, Donatus U, Queiroz FM, et al. On the severe localized corrosion susceptibility of the AA2198-T851 alloy. Corros Sci. 2018;133:132–140. doi:https://doi.org/10.1016/j.corsci.2018.01.028.
- Donatus U, de Viveiros BVG, de Alencar MC, et al. Correlation between corrosion resistance, anodic hydrogen evolution and microhardness in friction stir weldment of AA2198 alloy. Mater Charact. 2018;144:99–112. doi:https://doi.org/10.1016/j.matchar.2018.07.004.
- Li J, Peng Z, Li C, et al. Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments. Trans Nonferrous Met Soc China. 2008;18(4):755–762. doi:https://doi.org/10.1016/s1003-6326(08)60130-2.
- Birbilis N, Cavanaugh MK, Buchheit RG. Electrochemical behavior and localized corrosion associated with Al7Cu2Fe particles in aluminum alloy 7075-T651. Corros Sci. 2006;48(12):4202–4215. doi:https://doi.org/10.1016/j.corsci.2006.02.007.
- Liu B, Zhang X, Zhou X, et al. The corrosion behaviour of machined AA7150-T651 aluminium alloy. Corros Sci. 2017;126:265–271. doi:https://doi.org/10.1016/j.corsci.2017.07.008.