References
- Warner T. Recently-developed aluminium solutions for aerospace applications. Mater Sci Forum. 2006;519–521:1271–1278. doi:https://doi.org/10.4028/www.scientific.net/MSF.519-521.1271.
- Wanhill RJH, Bray GH. Aerostructural design and its application to aluminum – lithium alloys. In: NE Prasad, A Gokhale, RJH Wanhill, editors. Alum. – Lithium Alloy. Process. Prop. Appl. Oxford: Elsevier Inc; 2014. p. 27–58. doi:https://doi.org/10.1016/B978-0-12-401698-9.00002-1.
- Lequeu P, Smith KP, Daniélou A. Aluminium-copper-lithium alloy 2050 developed for medium to thick plate. J Mater Eng Perform. 2010;19:841–847. doi:https://doi.org/10.1007/s11665-009-9554-z.
- fei Zhang S, dong Zeng W, hua Yang W, et al. Aging response of a Al-Cu-Li 2198 alloy. Mater Des. 2014;63:368–374. doi:https://doi.org/10.1016/j.matdes.2014.04.063.
- Salem HG, Lyons JS. Effect of equal channel angular extrusion on the microstructure and superplasticity of an Al-Li alloy. J Mater Eng Perform. 2002;11:384–391. doi:https://doi.org/10.1361/105994902770343908.
- Chen DL, Chaturvedi MC. Effects of welding and weld heat-affected zone simulation on the microstructure and mechanical behavior of a 2195 aluminium-lithium alloy. Metall Mater Trans A Phys Metall Mater Sci. 2001;32:2729–2741. doi:https://doi.org/10.1007/s11661-001-1025-6.
- Ma YE, Zhao Z, Liu B, et al. Mechanical properties and fatigue crack growth rates in friction stir welded nugget of 2198-T8 Al-Li alloy joints. Mater Sci Eng A. 2013;569:41–47. doi:https://doi.org/10.1016/j.msea.2013.01.044.
- Häusler I, Schwarze C, Bilal M, et al. Precipitation of T1 and θ′ phase in Al-4Cu-1Li-0.25Mn during age hardening: microstructural investigation and phase-field simulation. Materials (Basel). 2017;10:117, doi:https://doi.org/10.3390/ma10020117.
- Wang SC, Starink MJ. Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys. Int Mater Rev. 2005;50:193–215. doi:https://doi.org/10.1179/174328005X14357.
- Taylor P, De Geuser F, Malard B. Microstructure mapping of a friction stir welded AA2050 Al – Li – Cu in the T8 state. Philos Mag. 2014;94:37–41. doi:https://doi.org/10.1080/14786435.2014.887862.
- Qin H, Zhang H, Wu H. The evolution of precipitation and microstructure in friction stir welded 2195-T8 Al-Li alloy. Mater Sci Eng A. 2015;626:322–329. doi:https://doi.org/10.1016/j.msea.2014.12.026.
- Milagre MX, Mogili NV, Donatus U, et al. On the microstructure characterization of the AA2098-T351 alloy welded by FSW. Mater Charact. 2018;140:233–246. doi:https://doi.org/10.1016/j.matchar.2018.04.015.
- de S. Araujo JV, de S.C. Milagre C, Xavier Machado M, et al. Estudo da influência dos tratamentos termomecânicos T8 e T851 na microestrutura e na resistência à corrosão da liga AA2198. Corrosão & Proteção. 2018;63:32–44.
- Donatus U, Terada M, Ospina CR, et al. On the AA2198-T851 alloy microstructure and its correlation with localized corrosion behaviour. Corros Sci. 2018;131:300–309. doi:https://doi.org/10.1016/j.corsci.2017.12.001.
- Ma Y, Zhou X, Huang W, et al. Crystallographic defects induced localised corrosion in AA2099-T8 aluminium alloy. Corros Eng Sci Technol. 2015;50:420–424. doi:https://doi.org/10.1179/1743278214Y.0000000237.
- Ma Y, Zhou X, Liao Y, et al. Localised corrosion in AA 2099-T83 aluminium-lithium alloy: the role of grain orientation. Corros Sci. 2016;107:41–48. doi:https://doi.org/10.1016/j.corsci.2016.02.018.
- Li JF, Li CX, Peng ZW, et al. Corrosion mechanism associated with T1 and T2 precipitates of Al-Cu-Li alloys in NaCl solution. J Alloys Compd. 2008;460:688–693. doi:https://doi.org/10.1016/j.jallcom.2007.06.072.
- Victor de Sousa Araujo J, de Fátima Santos Bugarin A, Donatus U, et al. Thermomechanical treatment and corrosion resistance correlation in the AA2198 Al-Cu-Li alloy. Corros Eng Sci Technol. 2019;54:575–586. doi:https://doi.org/10.1080/1478422X.2019.1637077.
- Milagre MX, Donatus U, Machado CSC, et al. Comparison of the corrosion resistance of an Al–Cu alloy and an Al–Cu–Li alloy. Corros Eng Sci Technol. 2019: 1–11. doi:https://doi.org/10.1080/1478422X.2019.1605472.
- Lei X, Saatchi A, Ghanbari E, et al. Studies on pitting corrosion of Al-Cu-Li alloys Part I: effect of Li addition by microstructural, electrochemical, in-situ, and pit depth analysis. Materials (Basel). 2019;12:1600–1616. doi:https://doi.org/10.3390/ma12121912.
- Milagre MX, Donatus U, MacHado CSC, et al. Exfoliation corrosion susceptibility in the zones of friction stir welded AA2098-T351. J Mater Res Technol. 2019;8:5916–5929. doi:https://doi.org/10.1016/j.jmrt.2019.09.066.
- da Silva RMP, Milagre MX, de Oliveira LA, et al. The local electrochemical behavior of the AA2098-T351 and surface preparation effects investigated by scanning electrochemical microscopy. Surf Interface Anal. 2019;51:982–992. doi:https://doi.org/10.1002/sia.6682.
- Milagre MX, Donatus U, Mogili NV, et al. Galvanic and asymmetry effects on the local electrochemical behavior of the 2098-T351 alloy welded by friction stir welding. J Mater Sci Technol. 2020;45:162–175. doi:https://doi.org/10.1016/j.jmst.2019.11.016.
- Xu X, Hao M, Chen J, et al. A influence of microstructural and crystallographic inhomogeneity on tensile anisotropy in thick-section Al–Li–Cu–Mg plates. Mater Sci Eng A. 2022;829:1–11. doi:https://doi.org/10.1016/j.msea.2021.142135.
- Gable BM, Csontos AA, Starke EA. A quench sensitivity study on the novel Al-Li-Cu-X alloy AF/C 458. J Light Met. 2002;2:65–75. doi:https://doi.org/10.1016/S1471-5317(02)00024-X.
- Kuo Z, Liu J, Mei YU, et al. Through thickness inhomogeneity of precipitate distribution and pitting corrosion behavior of Al–Li alloy thick plate. Trans Nonferrous Met Soc China. 2019;29:1793–1802.
- Crosby KE, Mirshams RA, Pang SS. Development of texture and texture gradient in Al-Cu-Li (2195) thick plate. J Mater Sci. 2000;35:3189–3195.