Influence of grain boundaries on the deformation resistance: insights from an investigation of deformation kinetics and microstructure of copper after predeformation by ECAP

References

• H.J. Frost and M.F. Ashby, Deformation-Mechanism Maps, Pergamon Press, Oxford, 1982.
   Google Scholar
• M. Cabibbo, W. Blum, E. Evangelista, M. Kassner and M. Meyers, Metall. Mater. Trans. A 39A (2008) p.181.
   Web of Science ®Google Scholar
• F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsevier Science, Oxford, 1995.
   Google Scholar
• H. Mughrabi, Z. Metallkd. 96 (2005) p.546.
   Google Scholar
• W. Blum, High-Temperature Deformation and Creep of Crystalline Solids,inPlastic Deformation and Fracture of Materials H. Mughrabi ed., Vol. 6, Materials Science and Technology, ed. by R.W. Cahn, P. Haasen and E.J. Kramer, VCH Verlagsgesellschaft, Weinheim, 1993, p.359.
   Google Scholar
• O.D. Sherby and P.M. Burke, Progr. Mater. Sci. 13 (1968) p.323.
   Web of Science ®Google Scholar
• A. Mukherjee, J. Bird and J. Dorn, ASM Trans. Quart. 62 (1969) p.155.
   Google Scholar
• B. Ilschner, Hochtemperaturplastizität, Springer, Berlin, 1973.
   Google Scholar
• T.G. Langdon, Z. Metallkd. 96 (2005) p.522.
   Google Scholar
• W. Blum and B. Reppich, Acta Metall. 17 (1969) p.959.
   Google Scholar
• R.L. Stocker and M.F. Ashby, Scripta metall. 7 (1973) p.362.
   Google Scholar
• B. Garofalo, Fundamentals of Creep and Creep Rupture, McMillan, New York, 1965.
   Google Scholar
• D. Hughes, D. Chrzan, Q. Liu and N. Hansen, Phys. Rev. Lett. 81 (1998) p.4664.
   Web of Science ®Google Scholar
• W. Blum, Creep of Aluminium and Aluminium Alloys, T.G. Langdon, H.D. Merchant, J.G. Morris and M.A. Zaidi, eds., The Minerals, Metals & Materials Society, Warrendale, Pa, 1991, p.181.
   Google Scholar
• P. Sadrabadi, P. Eisenlohr, G. Wehrhan, J. Stäblein, L. Parthier and W. Blum, Mater. Sci. Eng. A 510–511 (2009) p.46.
   Web of Science ®Google Scholar
• W. Blum, S. Straub and S. Vogler, Creep of pure materials and alloys, D.G. Brandon, R. Chaim and A. Rosen, eds., Freund Publishing House, London, 1991, p.111.
   Google Scholar
• E. Nes, Progr. Mater. Sci. 41 (1998) p.129.
   Web of Science ®Google Scholar
• R. Valiev, R. Islamgaliev and I. Alexandrov, Progr. Mater. Sci. 45 (2000) p.103.
   Web of Science ®Google Scholar
• S. Komura, Z. Horita, M. Nemoto and T.G. Langdon, J. Mater. Res. 14 (1999) p.4044.
   Web of Science ®Google Scholar
• F. Dalla Torre, R. Lapovok, J. Sandlin, P. Thomson, C. Davies and E. Pereloma, Acta Mater. 52 (2004) p.4819.
   Web of Science ®Google Scholar
• E. Schafler, G. Steiner, E. Korznikova, M. Kerber and M. Zehetbauer, Mater.Sci. and Eng. A 410–411 (2005) p.169.
   Web of Science ®Google Scholar
• F. Dalla Torre, E. Pereloma and C. Davies, Acta Mater. 54 (2006) p.1135–1146.
   Web of Science ®Google Scholar
• X. Molodova, G. Gottstein, M. Winning and R. Hellmig, Mater. Sci. Eng. A 460–461 (2007) p.204.
   Web of Science ®Google Scholar
• N. Lugo, N. Llorca, J. Cabrera and Z. Horita, Mater. Sci. Eng. A 477 (2008) p.366.
   Web of Science ®Google Scholar
• J.T. Wang, Y. Zhang and J.Q. Liu, Mater. Sci. Forum 584–586 (2008) p.929.
   Google Scholar
• Y.M. Wang and E. Ma, Acta Mater. 52 (2004) p.1699.
   Web of Science ®Google Scholar
• H. Mughrabi, H.W. Hoeppel, M. Kautz and R. Valiev, Z. Metallkd. 94 (2003) p.1079.
   Google Scholar
• W. Huang, C. Yu, P. Kao and C. Chang, Mater. Sci. Eng. A 366 (2004) p.221.
   Web of Science ®Google Scholar
• Y. Li, R. Kapoor, J. Wang and W. Blum, Scripta Mater. 58 (2008) p.53.
   Web of Science ®Google Scholar
• H.W. Höppel, M. Korn, R. Lapovok and H. Mughrabi, 15th International Conference on the Strength of Materials (ICSMA-15), Journal of Physics: Conference Series 24 (2010) p.012147.
   Google Scholar
• M. Korn, R. Lapovok, A. Böhner, H.W. Höppel and H. Mughrabi, Kovove Mater. 49 (2011) p.1.
   Web of Science ®Google Scholar
• F. Dalla Torre, E. Pereloma and C. Davies, Scripta Mater. 51 (2004) p.367.
   Web of Science ®Google Scholar
• W. Blum, Y.J. Li and K. Durst, Acta Mater. 57 (2009) p.5207.
   Web of Science ®Google Scholar
• S.R. Agnew and J.R. Weertman, Mater. Sci. Eng. A 244 (1998) p.145.
   Google Scholar
• H.W. Höppel, M. Brunnbauer, H. Mughrabi, R.Z. Valiev, and A.P. Zhilyaev, Cyclic Deformation Behaviour and of Ultrafine Grain Size Copper Produced by Equal Channel Angular Extrusion, in MATERIALS WEEK, Proceedings, Werkstoffwoche-Partnerschaft ed., Frankfurt 2001 (2000) p.1.
   Google Scholar
• H.W. Höppel, Z. Zhou, H. Mughrabi and R. Valiev, Philos. Mag. A 9 (2002) p.1781.
   Google Scholar
• W. Blum, Y.J. Li, Y. Zhang and J. Wang, Mater. Sci. Eng. A 528 (2011) p.8621.
   Web of Science ®Google Scholar
• W. Blum, P. Eisenlohr and V. Sklenička, Creep of bulk nanostructured materials,inBulk Nanostructured Materials, 1st ed., M. Zehetbauer and Y.T. Zhu, eds., Wiley-VCH, Weinheim, 2009, p.519.
   Google Scholar
• Y.J. Li, J. Mueller, H. Höppel, M. Göken and W. Blum, Acta mater. 55 (2007) p.5708.
   Web of Science ®Google Scholar
• W. Blum and H.J. McQueen, Dynamics of recovery and recrystallization, Vol. 217–222, J.H. Driver, B. Dubost, F. Durand, R. Fougeres, P. Guyot, P. Saintfort and M. Suery, eds., Materials Science Forum Transtec Publications, Zuerich, Switzerland, 1996, p.31.
   Google Scholar
• H.W. Höppel and M. Göken, Fatigue behaviour in nanostructured metals, in Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications, S.H. Whang ed., Woodhead publishing, Cambridge, 2011, p.507.
   Google Scholar
• R. Sandström, Acta Mater. 60 (2012) p.314.
   Web of Science ®Google Scholar
• W. Blum, Phys. Stat. Sol. (b) 45 (1971) p.561.
   Google Scholar
• T. Gorkaya, D.A. Molodov and G. Gottstein, Acta Mater. 57 (2009) p.5396.
   Web of Science ®Google Scholar
• L. Hollang, E. Hieckmann, D. Brunner, C. Holste and W. Skrotzki, Mater. Sci. Eng. A 424 (2006) p.138.
   Web of Science ®Google Scholar
• S. Cheng, E. Ma, Y. Wang, L. Kecskes, K. Youssef, C. Koch, U. Trociewitz and K. Han, Acta Mater. 53 (2005) p.1521.
   Web of Science ®Google Scholar
• M. Meyers, A. Mishra and D. Benson, Prog. Mater. Sci. 51 (2006) p.427.
   Web of Science ®Google Scholar
• H. Vehoff, D. Lemaire, K. Schüler, T. Waschkies and B. Yang, Int. J. Mat. Res. 98 (2007) p.259.
   Google Scholar
• Y. Li, X. Zeng and W. Blum, Acta Mater. 52 (2004) p.5009.
   Web of Science ®Google Scholar
• W. Blum and X.H. Zeng, Acta Mater. 57 (2009) p.1966.
   Web of Science ®Google Scholar
• R. Sandström and H.C. Andersson, J. Nuclear Mater. 372 (2008) p.76.
   Web of Science ®Google Scholar
• R. Sandström and J. Hallgren, J. Nuclear Mater. 422 (2012) p.51.
   Web of Science ®Google Scholar
• W. Blum and P. Eisenlohr, Mater. Sci. Eng. A 510–511 (2009) p.7.
   Web of Science ®Google Scholar
• W. Blum and X.H. Zeng, Acta Mater. 59 (2011) p.6205.
   Web of Science ®Google Scholar
• X. Zeng, Modeling Hardening and Softening Due to High-Angle Grain Boundaries in Crystalline Solids, University of Erlangen-Nürnberg, Erlangen, 2007.
   Google Scholar