References
- J.H. Moll, J.J. Conway, in Superalloys 2000, C.M. Pollock, R.D. Kissinger and R.R. Bowman, K.A. Green, M. McJxan, S. Olson, and J.J. Schirra., eds., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2000, p.135.
- R. Baccino, F. Moret, F. Fellerin, D. Guichard and G. Raisson, Mater. Des. 21 (2000) p.345.
- W. Voice, M. Hardyand D. Rugg, PM-2004 Powder Metallurgy Conference, Vienna, 2004.
- G. Raisson, J.-Y. Guédou, D. Guichard and J.-M. Rongvaux, Adv. Mater. Res. 278 (2011) p.277.
- Z. Wu, C.L. Qiu, V. Venkatesh, H.L. Fraser, R.E.A. Williams, G.B. Viswanathan, M. Thomas, S. Nag, R. Banerjee and M.H. Loretto, Metall. Mater. Trans. A 44 (2013) p.1706.
- R.G. Menzies, R.H. Bricknell and A.J. Craven, Philos. Mag. A 41 (1980) p.493.
- G.A. Rao, K. Satyaprasad, M. Kumar, M. Srinivas and D.S. Sarma, Mater. Sci. Tech. 19 (2003) p.313.
- D.L. Williams, Powder Metall. 2 (1977) p.84.
- J. Radavich, D. Furrer, in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, eds., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2004. p.381.
- H.V. Atkinson and S. Davies, Metall. Mater. Trans. A 31 (2000) p.2981.
- E.S. Huron, R.L. Casey, M.F. Henry, D.P. Mourer, in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, M.V. Nathal, T.M. Pollock and D.A. Woodford, eds., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 1996, p.645.
- E.S. Huron, K.R. Bain, D.P. Mourer, J.J. Schirra, P.L. Reynolds, E.E. Montero, in Superalloys 2004, K.A. Green, T.M. Pollock and H. Harada, eds., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 2004, p.73.
- J.M. Hyzak and I.M. Bernstein, Metall. Trans. A 13 (1982) p.33.
- J.M. Hyzak and I.M. Bernstein, Metall. Trans. A 13 (1982) p.45.
- G.A. Rao, M. Srinivas and D.S. Sarma, Mater. Sci. Eng. A 435–436 (2006) p.84.
- D.R. Chang, D.D. Krueger, R.A. Sprague, in Superalloys 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent and J.F. Radavich, eds., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 1984, p.245.
- C.L. Qiu, M.M. Attallah and X.H. Wu, Mater. Sci. Eng. A 564 (2013) p.176.
- C.L. Qiu, X.H. Wu, J.F. Mei, P. Andrews and W. Voice, J. Alloys. Compd. 57 (2013) p.454.
- H.T. Pang and P.A.S. Reed, Int. J. Fatigue 30 (2008) p.2009.
- E.S. Huron and P.G. Roth, in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, M.V. Nathal, T.M. Pollock and D.A. Woodford, eds., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 1996, p.359.
- R. Molins, G. Hochstetter, J.C. Chassaigne and E. Andrieu, Acta Mater. 45 (1997) p.663.
- S. Everitt, M.J. Starink, H.T. Pang, I.M. Wilcock, M.B. Henderson and P.A.S. Reed, Mater. Sci. Tech. 23 (2007) p.1419.
- G. Onofrio, G.A. Osinkolu and M. Marchionni, Int. J. Fatigue 23 (2001) p.887.
- J. Tong and J. Byrne, Fatigue Fract. Eng. Mater. Struct. 22 (1999) p.185.
- H. Andersson, C. Persson and T. Hansson, Int. J. Fatigue 23 (2001) p.817.
- W.J. Evans, J.P. Jones and S. Williams, Int. J. Fatigue 27 (2005) p.1473.
- J. Tong, S. Dalby, J. Byrne, M.B. Henderson and M.C. Hardy, Int. J. Fatigue 23 (2001) p.897.
- A. Pineau, in Mechanical Behaviour of Materials at Temperature, C.M. Branco, R. Ritchieand V. Sklenicka, eds., Kluwer Academic, Dordrecht, 1996, p.135.
- G. Moulin, P. Arevalo and A. Salleo, Oxid. Met. 45 (1999) p.153.