References
- R.C. Reed, The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285
- R. MacKay and R.D. Maier, Metall. Trans. A 13 (1982) p.1747.10.1007/BF02647830
- R.P. Dalal, C.R. Thomas and L.E. Dardi, The effect of crystallographic orientation on the physical and mechanical properties of an investment cast single crystal nickel-base superalloy, in Superalloys, R.H. Bricknell, W.B. Kent, M. Gell, C.S. Kortovich and J.F. Radavich, eds., AIME, Warrendale, PA, 1984, p.185.
- P. Lukaš and P. Preclik, Mater. Sci. Eng. A 298 (2001) p.84.10.1016/S0921-5093(00)01288-0
- B.H. Kear and B.J. Piearcey, Trans. AIME 239 (1967) p.1209.
- R. MacKay, R.L. Dreshfield and R.D. Maier, Anisotropy of nickel-base superalloy single crystals, in Superalloys, J.K. Tien, S.T. Wlodek, H.I.I.I. Morrow, M. Gell and G.E. Maurer, eds., ASM, Metals Park, OH, 1980, p.385.
- P. Caron, Y. Ohta, Y.G. Nakagawa and T. Khan, Creep deformation anisotropy in single crystal superalloys, in Superalloys, S. Reichman, D.N. Duhl, G. Maurer, S. Autolovich and C. Lund, eds., Metallurgical Society of AIME, Warrendale, PA, 1988, p.215.
- P. Caron, T. Khan and Y.G. Nakagawa, Scripta Metall. 20 (1986) p.499.10.1016/0036-9748(86)90242-5
- S.S. Ezz and D.P. Pope, Scripta Metall. 19 (1985) p.741.10.1016/0036-9748(85)90037-7
- V. Paidar, D.P. Pope and V. Vitek, Acta Metall. 32 (1984) p.435.10.1016/0001-6160(84)90117-2
- P.H. Thornton, Metall. Trans. 3 (1972) p.291.10.1007/BF02680608
- S. Takeuchi and E. Kuramoto, Acta Metall. 21 (1973) p.415.10.1016/0001-6160(73)90198-3
- S.J. Liang and D.P. Pope, Acta Metall. 25 (1977) p.485.10.1016/0001-6160(77)90188-2
- P.D. Umakoshi, D.P. Pope and V. Vitek, Acta Metall. 32 (1984) p.449.10.1016/0001-6160(84)90118-4
- F.E. Heredia and D.P. Pope, Acta Metall. 34 (1986) p.279.10.1016/0001-6160(86)90198-7
- D.C. Stouffer and L.T. Dame, Inelastic Deformation of metals, Wiley, New York, 1996, p.502.
- S.S. Ezz, D.P. Pope and V. Paidar, Acta Metall. 30 (1982) p.921.10.1016/0001-6160(82)90198-5
- A. Nitz and E. Nembach, Mater. Sci. Eng. A 263 (1999) p.15.10.1016/S0921-5093(98)01025-9
- E.F. Westbrooke, L.E. Forero and F. Ebrahimi, Acta Mater. 53 (2005) p.2137.10.1016/j.actamat.2005.01.025
- P. Li, Q.Q. Li, T. Jin, Y.Z. Zhou, J.G. Li, X.F. Sun and Z.F. Zhang, Int. J. Fatigue 63 (2014) p.137.
- D.M. Shah and D.N. Duhl, Superalloys, TMS, Metals Park, OH, 1984, p.105.
- F.E. Heredia and D.P. Pope, Acta Metall. 34 (1986) p.279.10.1016/0001-6160(86)90198-7
- A. Nitz, U. Lagerpusch and E. Nembach, Acta Mater. 46 (1998) p.4769.10.1016/S1359-6454(98)00126-8
- C. Lall, S. Chin and D.P. Pope, Metall. Trans. 10A (1979) p.1323.10.1007/BF02811988
- R.V. Miner, T.B. Gabb, J. Gayda and K.J. Hemker, Metall. Trans. 17A (1986) p.507.10.1007/BF02643957
- P. Li, S.X. Li, Z.G. Wang and Z.F. Zhang, Prog. Mater. Sci. 56 (2011) p.328.10.1016/j.pmatsci.2010.12.001
- A. Vattré, B. Devincre and A. Roos, Acta Mater. 58 (2010) p.1938.10.1016/j.actamat.2009.11.037
- X.W. Li, Z.G. Wang, G.Y. Li, S.D. Wu and S.X. Li, Acta Mater. 46 (1998) p.4497.10.1016/S1359-6454(98)00151-7
- R.K. Nalla, J.P. Campbell and R.O. Ritchie, Int. J. Fatigue 24 (2002) p.1047.10.1016/S0142-1123(02)00020-8
- F.P.E. Dunne, A.J. Wilkinson and R. Allen, Int. J. Plast. 23 (2007) p.273.10.1016/j.ijplas.2006.07.001
- M. Peach and J.S. Koehler, Phys. Rev. 80 (1950) p.436.10.1103/PhysRev.80.436
- M.B. Henderson and J.W. Martin, Acta Mater. 44 (1996) p.111.10.1016/1359-6454(95)00147-9