Externally applied stress sign and film elastic properties effects on brittle film fracture

References

• Z. Chen, L.Y.L. Wu, E. Chwa, and O. Tham, Scratch resistance of brittle thin films on compliant substrates. Mater. Sci. Eng. A 493 (2008), pp. 292–298.10.1016/j.msea.2007.07.099
   Web of Science ®Google Scholar
• S.P. Tiwari, P. Srinivas, S. Shriram, N.S. Kale, S.G. Mhaisalkar, and V. Ramgopal Rao, Organic FETs with HWCVD silicon nitride as a passivation layer and gate dielectric,Thin Solid Films 516 (2008), pp. 770–772.
   Google Scholar
• X. Xiao, P. Liu, M.W. Verbrugge, H. Haftbaradaran, and H. Gao, Improved cycling stability of silicon thin film electrodes through patterning for high energy density lithium batteries, J. Power Sources 196 (2011), pp. 1409–1416.10.1016/j.jpowsour.2010.08.058
   Google Scholar
• S.H. Jen, J.A. Bertrand, and S.M. George, Critical tensile and compressive strains for cracking of Al2O3 films grown by atomic layer deposition, J. Appl.Phys. 109 (2011), p. 084305.10.1063/1.3567912
   Google Scholar
• K.W. McElhaney and Q. Ma, Investigation of moisture-assisted fracture in SiO₂ films using a channel cracking technique, Acta Mater. 52 (2004), pp. 3621–3629.10.1016/j.actamat.2004.04.014
   Google Scholar
• C. Chaiwong, D.R. McKenzie, and M.M.M. Bilek, Cracking of titanium nitride films grown on polycarbonateSurf. Coat. Technol. 201 (2007), pp. 5596–5600.10.1016/j.surfcoat.2006.07.200
   Google Scholar
• Y. Li, X.-S. Wang. and X.-K. Meng, Buckling behavior of metal film/substrate structure under pure bending, Appl. Phys. Lett. 92 (2008), p. 131902.10.1063/1.2897035
   Web of Science ®Google Scholar
• L. Zhang, H. Yang, X. Pang, K. Gao, and A.A. Volinsky, Microstructure, residual stress, and fracture of sputtered TiN films, Surf. Coat. Technol. 224 (2013), pp. 120–125.10.1016/j.surfcoat.2013.03.009
   Google Scholar
• T. Guo, L. Qiao, X. Pang, and A.A. Volinsky, Brittle film-induced cracking of ductile substrates, Acta Mater. 99 (2015), pp. 273–280.10.1016/j.actamat.2015.07.059
   Google Scholar
• J.M. Jungk, B.L. Boyce, T.E. Buchheit, T.A. Friedmann, D. Yang, and W.W. Gerberich, Indentation fracture toughness and acoustic energy release in tetrahedral amorphous carbon diamond-like thin films, Acta Mater. 54 (2006), pp. 4043–4052.10.1016/j.actamat.2006.05.003
   Google Scholar
• S. Math, S. Suresha, V. Jayaram, and S. Biswas, Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity, J. Mater. Sci. 41 (2006), pp. 7830–7837.10.1007/s10853-006-0455-3
   Google Scholar
• F. Ahmed, K. Bayerlein, S.M. Rosiwal, M. Göken, and K. Durst, Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling, Acta Mater. 59 (2011), pp. 5422–5433.10.1016/j.actamat.2011.05.015
   Google Scholar
• B.F. Chen, J. Hwang, I.F. Chen, G.P. Yu, and J.H. Huang, A tensile-film-cracking model for evaluating interfacial shear strength of elastic film on ductile substrate, Surf. Coat. Technol. 126 (2000), pp. 91–95.10.1016/S0257-8972(99)00669-6
   Google Scholar
• S. Frank, U.A. Handge, S. Olliges, and R. Spolenak, The relationship between thin film fragmentation and buckle formation: Synchrotron-based in situ studies and two-dimensional stress analysis, Acta Mater. 57 (2009), pp. 1442–1453.10.1016/j.actamat.2008.11.023
   Google Scholar
• S. Krishnamurthy and I. Reimanis, Multiple cracking in CrN and Cr2N films on brass, Surf. Coat. Technol. 192 (2005), pp. 291–298.10.1016/j.surfcoat.2004.06.025
   Google Scholar
• Q.P. Cao, Y. Ma, Y. Xu, L.Y. Chen, C. Wang, Y.Y. Ruan, X.D. Wang, and J.Z. Jiang, Bending behavior of electrodeposited glass Pd-P and Pd-Ni-P thin films, Scr. Mater. 68 (2013), pp. 455–458.10.1016/j.scriptamat.2012.11.023
   Google Scholar
• S. Nekkanty, M. Walter, and R. Shivpuri, A cohesive zone finite element approach to model tensile cracks in thin film coatings, J. Mech. Mater. Struct. 2 (2007), pp. 1231–1247.10.2140/jomms
   Google Scholar
• C. Xie and W. Tong, Cracking and decohesion of a thin Al₂O₃ film on a ductile Al-5%Mg substrate, Acta Mater. 53 (2005), pp. 477–485.10.1016/j.actamat.2004.10.005
   Google Scholar
• S.-J. Yu, M.-G. Chen, J. Chen, H. Zhou, Y.-J. Zhang, and P.-Z. Si, Spatial and kinetic evolutions of telephone cord buckles, Surf. Coat. Technol. 228 (2013), pp. 258–265.10.1016/j.surfcoat.2013.04.038
   Google Scholar
• X. Xue, S. Wang, C. Zeng, H. Bai, L. Li, and Z. Wang, Buckling-delamination and cracking of thin titanium films under compression: Experimental and numerical studies, Surf. Coat. Technol. 244 (2014), pp. 151–157.10.1016/j.surfcoat.2014.01.064
   Google Scholar
• B. Cotterell and Z. Chen, Buckling and cracking of thin films on compliant substrates under compression, Int. J. Fract. 104 (2000), pp. 169–179.10.1023/A:1007628800620
   Google Scholar
• M. He, A. Evans, and J. Hutchinson, The ratcheting of compressed thermally grown thin films on ductile substrates, Acta Mater. 48 (2000), pp. 2593–2601.10.1016/S1359-6454(00)00053-7
   Google Scholar
• V.K. Tolpygo, J.R. Dryden, and D.R. Clarke, Determination of the growth stress and strain in α-Al₂O₃ scales during the oxidation of Fe-22Cr-4.8Al-0.3Y alloy, Acta Mater. 46 (1998), pp. 927–937.10.1016/S1359-6454(97)00306-6
   Google Scholar
• M.J. Cordill, F.D. Fischer, F.G. Rammerstorfer, and G. Dehm, Adhesion energies of Cr thin films on polyimide determined from buckling: Experiment and model, Acta Mater. 58 (2010), pp. 5520–5531.10.1016/j.actamat.2010.06.032
   Google Scholar
• P.A. Gruber, J. Böhm, F. Onuseit, A. Wanner, R. Spolenak, and E. Arzt, Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: A study by synchrotron and bulge test techniques, Acta Mater. 56 (2008), pp. 2318–2335.10.1016/j.actamat.2008.01.027
   Google Scholar
• C.H. Hsueh and M. Yanaka, Multiple film cracking in film/substrate systems with residual stresses and unidirectional loading, J. Mater. Sci. 38 (2003), pp. 1809–1817.10.1023/A:1023200415364
   Google Scholar
• S. Bhowmick, V. Jayaram, and S. Biswas, Deconvolution of fracture properties of TiN films on steels from nanoindentation load-displacement curves, Acta Mater. 53 (2005), pp. 2459–2467.10.1016/j.actamat.2005.02.008
   Google Scholar
• E. Berasategui and T. Page, The contact response of thin SiC-coated silicon systems-characterisation by nanoindentation, Surf. Coat. Technol. 163–164 (2003), pp. 491–498.10.1016/S0257-8972(02)00647-3
   Google Scholar
• Matweb. Available at http://www.matweb.com[13.07.10].
   Google Scholar
• D.C. Agrawal and R. Raj, Measurement of the ultimate shear strength of a metal-ceramic interface, Acta Metall. 37 (1989), pp. 1265–1270.10.1016/0001-6160(89)90120-X
   Google Scholar
• U.A. Handge, Analysis of a shear-lag model with nonlinear elastic stress transfer for sequential cracking of polymer coatings, J. Mater. Sci. 37 (2002), pp. 4775–4782.10.1023/A:1020814314019
   Google Scholar
• B.F. Chen, J. Hwang, G.P. Yu, and J.H. Huang, In situ observation of the cracking behavior of TiN coating on 304 stainless steel subjected to tensile strain, Thin Solid Films 352 (1999), pp. 173–178.10.1016/S0040-6090(99)00342-9
   Google Scholar
• T. Li, Z.Y. Huang, Z.C. Xi, S.P. Lacour, S. Wagner, and Z. Suo, Delocalizing strain in a thin metal film on a polymer substrate, Mech. Mater. 37 (2005), pp. 261–273.10.1016/j.mechmat.2004.02.002
   Google Scholar