References
- H. Conrad, Prog. Mater. Sci. 26 (1981), p. 123. Available at http://www.sciencedirect.com/science/article/pii/0079642581900013.
- Q. Yu, L. Qi, T. Tsuru, R. Traylor, D. Rugg, J.W. Morris, M. Asta, D.C. Chrzan, and A.M. Minor, Science 347 (2015), p. 635. Available at http://www.sciencemag.org/content/347/6222/635.full.
- J.D. Cotton, P.J. Hellenbrand, D.J. Bryan, T.D. Bayha, M. Leder, and I. Levin, The effect of hydrogen on the fracture toughness of Ti-5Mo-5V-5Al-3Cr, in TMS 2014 Supplemental Proceedings, John Wiley & Sons, Inc., Hoboken, NJ, USA, 2014, doi: 10.1002/9781118889879.ch10.
- R.R. Boyer and W.F. Spurr, Metall. Trans. A 9 (1978), p. 23. Available at http://link.springer.com/10.1007/BF02647166.
- W. Evans and M. Bache, Scr. Metall. Mater. 32 (1995), p. 1019. Available at http://www.sciencedirect.com/science/article/pii/0956716X95000687.
- A.L. Pilchak and J.C. Williams, Metall. Mater. Trans. A 42 (2010), p. 1000. Available at http://link.springer.com/10.1007/s11661-010-0507-9.
- T. Chapman, R. Chater, E. Saunders, A. Walker, T. Lindley, and D. Dye, Corros. Sci. 96 (2015), p. 87. Available at http://www.sciencedirect.com/science/article/pii/S0010938X15001407.
- W. Mason and J. Wehr, J. Phys. Chem. Solids 31 (1970), p. 1925. Available at http://www.sciencedirect.com/science/article/pii/0022369770901873.
- N. Guiles and K. Ono, The effect of hydrogen on internal friction of several titanium alloys, in Effect of hydrogen on behavior of materials, A. Thompson and I. Bernstein, eds.,Metall. Soc. AIME, New York, 1976, pp. 666–674.
- S. Amadori, E. Bonetti, L. Pasquini, P. Deodati, R. Donnini, R. Montanari, and C. Testani, Mater. Sci. Eng.: A 521–522 (2009), p. 340. Available at http://linkinghub.elsevier.com/retrieve/pii/S0921509309002615.
- J. Du, Journal de Physique Colloques C5(42) (1981), p. 775. Available at http://jphyscol.journaldephysique.org/articles/jphyscol/abs/1981/05/jphyscol198142C5120.html.
- A. Migliori and J. Sarrao, Resonant Ultrasound Spectroscopy: Applications to Physics, Material Measurements and Nondestructive Evaluation, Wiley, New York, 1997.
- R.E.A. McKnight, M.A. Carpenter, T.W. Darling, A. Buckley, and P.A. Taylor, Am. Mineral. 92 (2007), p. 1665. Available at http://ammin.geoscienceworld.org/cgi/doi/10.2138/am.2007.2568.
- http://www.magnet.fsu.edu/inhouseresearch/rus/index.html
- A. Migliori, J. Sarrao, W. Visscher, T. Bell, M. Lei, Z. Fisk, and R. Leisure, Physica B 183 (1993), p. 1. Available at http://www.sciencedirect.com/science/article/pii/092145269390048B.
- G. Lütjering, Mater. Sci. Eng.: A 243 (1998), p. 32. Available at http://www.sciencedirect.com/science/article/pii/S0921509397007788.
- A. Marmier, Z.A.D. Lethbridge, R.I. Walton, C.W. Smith, S.C. Parker, and K.E. Evans, Comput. Phys. Commun. 181 (2010), p. 2102. Available at http://linkinghub.elsevier.com/retrieve/pii/S0010465510003401.
- M. Bache and W. Evans, Mater. Sci. Eng.: A 319–321 (2001), p. 409. Available at http://www.sciencedirect.com/science/article/pii/S0921509300020347.
- E. Naimon, W. Weston, and H. Ledbetter, Cryogenics 14 (1974), p. 246. Available at http://linkinghub.elsevier.com/retrieve/pii/0011227574902239.
- Y.T. Lee, M. Peters, and G. Welsch, Metall. Trans. A 22 (1991), p. 709. Available at http://link.springer.com/article/10.1007/BF02670293.
- Materials properties data book. Volume I. Introduction and light metals, Report No: AGC-2275, Tech. Rep., Aerojet Nuclear Systems Co., U.S. Department of Energy, Sacramento, CA, 1970. Available at http://www.osti.gov/scitech/biblio/4240042.
- F.R. Schwartzberg, S.H. Osgood, R.D. Keys, and T.F. Kiefer, Martin Marietta Corporation, Cryogenic materials data handbook, AFML Rep No ML-TDR-64-280, Compiler: M. Knight, Air Force Materials Laboratory, 1970.
- S. Hanlein, W. Hinckley, and F. Stecher, NOLTR Report 70–141: Comparison of Mechanical and Acoustic Properties for Selected Nonferrous, Ferrous, and Plastic Materials, Tech. Rep, United States Naval Ordinance Laboratory, White Oak, MD, 1970.
- Z. Fan, Scr. Metall. Mater. 29 (1993), p. 1427. Available at http://www.sciencedirect.com/science/article/pii/0956716X9390331L.
- I. Sen and U. Ramamurty, Scr. Mater. 62 (2010), p. 37. Available at http://linkinghub.elsevier.com/retrieve/pii/S1359646209005934.
- A.K. Swarnakar, O. Biest, and B. Baufeld, J. Mater. Sci. 46 (2011), p. 3802. Available at http://link.springer.com/10.1007/s10853-011-5294-1.
- M. Niinomi, Mater. Sci. Eng.: A 243 (1998), p. 231. Available at http://linkinghub.elsevier.com/retrieve/pii/S092150939700806X.
- R. Ritchie, D. Davidson, B. Boyce, J. Campbell, and O. Roder, Fatigue Fract. Eng. Mater. Struct. 22 (1999), p. 621. Available at http://doi.wiley.com/10.1046/j.1460-2695.1999.00194.x.
- R.M. Pilliar, Biomaterials 12 (1991), p. 95. Available at http://www.sciencedirect.com/science/article/pii/014296129190185D.
- D. Kuroda, M. Niinomi, M. Morinaga, Y. Kato, and T. Yashiro, Mater. Sci. Eng.: A 243 (1998), p. 244. Available at http://linkinghub.elsevier.com/retrieve/pii/S0921509397008083.
- H. Choe, S.M. Abkowitz, S. Abkowitz, and D.C. Dunand, Mater. Sci. Eng.: A 396 (2005), p. 99. Available at http://linkinghub.elsevier.com/retrieve/pii/S0921509305000729.
- G. Welsch, R.R. Boyer, and E.W. Collings. Materials Properties Handbook: Titanium Alloys, ASM International, 1993. Available at http://books.google.com/books?id=x3rToHWOcD8C&pgis=1.
- J. Vuorinen and R. Schwarz, J. Compos. Mater. 36 (2002), p. 173. Available at http://jcm.sagepub.com/content/36/2/173.short.
- E. Torok and J. Simpson, Dynamic elastic and damping properties of some practical Ti-base alloys, Titanium ’80 Science and Technology: Proceedings of the 4th International Conference on Titanium, Warrendale, PA, 1980, p. 601.
- M. Fukuhara and A. Sanpei, J. Mater. Sci. Lett. 12 (1993), p. 1122. Available at http://link.springer.com/article/10.1007/BF00420541.
- M. Landa, P. Sedlák, H. Seiner, L. Heller, L. Bicanová, P. Šittner, and V. Novák, Appl. Phys. A 96 (2009), p. 557. Available at http://link.springer.com/10.1007/s00339-008-5047-4.
- J. Nejezchlebová, H. Seiner, M. Šev\’{i}k, M. Landa, and M. Karlík, NDT & E Int. 69 (2015), p. 40. Available at http://www.sciencedirect.com/science/article/pii/S0963869514001200.
- A. Nowick and B. Berry, Anelastic Relaxation in Crystalline Solids, Academic Press, New York, 1962.
- F. Saigne, L. Dusseau, L. Albert, J. Fesquet, J. Gasiot, J.P. David, R. Ecoffet, R.D. Schrimpf, and K.F. Galloway, J. Appl. Phys. 82 (1997), p. 4102. Available at http://scitation.aip.org/content/aip/journal/jap/82/8/10.1063/1.365721.
- Y. Lee and G. Welsch, Mater. Sci. Eng.: A 128 (1990), p. 77. Available at http://www.sciencedirect.com/science/article/pii/092150939090097M.
- X. Guan, H. Numakura, M. Koiwa, K. Hasegawa, and C. Ouchi, Mater. Sci. Eng.: A 272 (1999), p. 230. Available at http://www.sciencedirect.com/science/article/pii/S0921509399004645.
- R. Wasilewski and G. Kehl, Metallurgia 50 (1954), p. 225.
- W. Holman, R. Crawford, and F. Paredes, Trans. Metall. Soc. AIME 233 (1965), p. 1836.
- S. Malinov, W. Sha, Z. Guo, C. Tang, and A. Long, Mater. Charact. 48 (2002), p. 279. Available at http://www.sciencedirect.com/science/article/pii/S1044580302002863.
- O. Senkov, B. Chakoumakos, J. Jonas, and F. Froes, Mater. Res. Bull. 36 (2001), p. 1431. Available at http://linkinghub.elsevier.com/retrieve/pii/S0025540801006043.
- C. Korn and D. Teitel, Phys. Status Solidi A 44 (1977), p. 755. Available at http://onlinelibrary.wiley.com/doi/10.1002/pssa.2210440245/abstract.
- H. Asano, Y. Abe, and M. Hirabayashi, Acta Metall. 24 (1976), p. 95. Available at http://www.sciencedirect.com/science/article/pii/0001616076901528.
- R. Schaller, G. Fantozzi, and G. Gremaud, Mechanical Spectroscopy Q-1 2001: With Applications to Materials Science, Trans Tech Publications Ltd, Clausthal, 2001.
- I. Golovin, S. Divinski, J. Čížek, I. Procházka, and F. Stein, Acta Mater. 53 (2005), p. 2581. Available at http://linkinghub.elsevier.com/retrieve/pii/S1359645405001023.
- D.H. Niblett, J. Appl. Phys. 32 (1961), p. 895. Available at http://link.aip.org/link/JAPIAU/v32/i5/p895/s1&Agg=doi.
- A.S. Nowick and B.S. Berry, Lognormal distribution function for describing anelastic and other relaxation processes I. theory and numerical computations. IBM J. Res. Dev. 5 (1961), pp. 297–311.
- K. Ushioda, N. Yoshinaga, H. Saitoh, and O. Akisue, Influences of third elements on snoek peak and the diffusion of C in Ternary Fe-C-M alloys. Defect Diffus. Forum 95–98 (1993), pp. 375–380.
- H. Saitoh, N. Yoshinaga, and K. Ushioda, Influence of substitutional atoms on the snoek peak of carbon in b.c.c. iron. Acta Mater. 52 (2004), pp. 1255–1261.
- I.S. Golovin, M.S. Blanter, and R. Schaller, Snoek relaxation in Fe-Cr alloys and interstitial-substitutional interaction. Phys. Stat. Sol A 160 (1997), pp. 49–60.