References
- A. Trautwein and W. Gysel, Influence of Long-time Aging of CF8 and CF8M cast Steel at Temperatures Between 300 and 500°C on Impact Toughness and Structural Properties, in Stainless Steel Castings, V.G. Behal and A.S. Melilli, eds., American Society for Testing and Materials, Philadelphia, PA, 1982, pp. 165–189.10.1520/STP756-EB
- S. Bonnet, J. Bourgoin, J. Champredonde, D. Guttmann, and M. Guttmann, Relationship between evolution of mechanical properties of various cast duplex stainless steels and metallurgical and aging parameters: Outline of current EDF programmes, Mater. Sci. Technol. 6 (1990), pp. 221–229.10.1179/mst.1990.6.3.221
- K.L. Weng, H.R. Chen, and J.R. Yang, The low-temperature aging embrittlement in a 2205 duplex stainless steel, Mater. Sci. Eng. A 379 (2004), pp. 119–132.10.1016/j.msea.2003.12.051
- T. Yamada, S. Okano, and H. Kuwano, Mechanical property and microstructural change by thermal aging of SCS14A cast duplex stainless steel, J. Nucl. Mater. 350 (2006), pp. 47–55.10.1016/j.jnucmat.2005.11.008
- M.K. Miller and J. Bentley, APFIM and AEM investigation of CF8 and CF8M primary coolant pipe steels, Mater. Sci. Technol. 6 (1990), pp. 285–292.10.1179/mst.1990.6.3.285
- P. Auger, F. Danoix, A. Menand, S. Bonnet, J. Bourgoin, and M. Guttmann, Atom probe and transmission electron microscopy study of aging of cast duplex stainless steels, Mater. Sci. Technol. 6 (1990), pp. 301–313.10.1179/mst.1990.6.3.301
- T.R. Leax, S.S. Brenner, and J.A. Spitznagel, Atom probe examination of thermally aged CF8M cast stainless steel, Metall. Trans. A 23 (1992), pp. 2725–2736.10.1007/BF02651752
- F. Danoix and P. Auger, Atom Probe Studies of the Fe-Cr System and Stainless Steels Aged at Intermediate Temperature: A Review, Mater. Charact. 44 (2000), pp. 177–201.
- C. Pareige, S. Novy, S. Saillet, and P. Pareige, Study of phase transformation and mechanical properties evolution of duplex stainless steels after long term thermal ageing (>20 years), J. Nucl. Mater. 411 (2011), pp. 90–96.10.1016/j.jnucmat.2011.01.036
- J.J. Shiao, C.H. Tsai, J.J. Kai, and J.H. Huang, Aging embrittlement and lattice image analysis in a Fe-Cr-Ni duplex stainless steel aged at 400°C, J. Nucl. Mater. 217 (1994), pp. 269–278.10.1016/0022-3115(94)90376-X
- T. Hamaoka, A. Nomoto, K. Nishida, K. Dohi, and N. Soneda, Effects of aging temperature on G-phase precipitation and ferrite-phase decomposition in duplex stainless steel, Philos. Mag. 92 (2012), pp. 4354–4375.10.1080/14786435.2012.707340
- F. Danoix, P. Auger, S. Chambreland, and D. Blavette, A 3D study of G-phase precipitation in spinodally decomposed α-ferrite by tomographic atom-probe analysis, Microsc. Microanal. Microstruct. 5 (1994), pp. 121–132.10.1051/mmm:0199400502012100
- A. Mateo, L. Llanes, M. Anglada, A. Redjaïmia, and G. Metauer, Characterization of the intermetallic G-phase in an AISI 329 duplex stainless steel, J. Mat. Sci. 32 (1997), pp. 4533–4540.10.1023/A:1018669217124
- S. Li, Y. Wang, X. Wang, and F. Xue, G-phase precipitation in duplex stainless steels after long-term thermal aging: A high-resolution transmission electron microscopy study, J. Nucl. Mater. 452 (2014), pp. 382–388.10.1016/j.jnucmat.2014.05.069
- G. Bergman and J.L.T. Waugh, The crystal structure of the intermetallic compound Mg6Si7Cu16, Acta Cryst. 9 (1956), pp. 214–217.10.1107/S0365110X56000632
- F.X. Spiegel, D. Bardos, and P.A. Beck, Ternary G and E silicides and germanides of transition elements, Trans. Metall. Soc. AIME 227 (1963), pp. 575–579.
- A. Grytsiv, P. Rogl, and V. Pomjakushin, Structural transition with loss of symmetry in Ti–M–Al based G-phases (M Fe and Co), Intermetallics 14 (2006), pp. 784–791.10.1016/j.intermet.2005.12.001
- T. Hamaoka, A. Nomoto, K. Nishida, K. Dohi, and N. Soneda, Accurate determination of the number density of G-phase precipitates in thermally aged duplex stainless steel, Philos. Mag. 92 (2012), pp. 2716–2732.10.1080/14786435.2012.674222
- J.C.H. Spence, High-Resolution Electron Microscopy, 3rd ed., Oxford University Press, New York, NY, 2003.
- K.L. Holman, E. Morosan, P.A. Casey, L. Li, N.P. Ong, T. Klimczuk, C. Felser, and R.J. Cava, Crystal structure and physical properties of Mg6Cu16Si7-type M6Ni16Si7, for M = Mg, Sc, Ti, Nb, and Ta, Mater. Res. Bulletin 43 (2008), pp. 9–15.
- H. Sidhom and R. Portier, An icosahedral phase in annealed austenitic stainless steel? Philos. Mag. Lett. 59 (1989), pp. 131–139.10.1080/09500838908206334
- Z.W. Hu, X.L. Jiang, J. Zhu, and S.S. Hsu, Formation of quasicrystalline phase and its orientation relationship with the parent phase in a duplex stainless steel, Philos. Mag. Lett. 61 (1990), pp. 115–118.10.1080/09500839008206489
- J.M. Vitek, S.A. David, D.J. Alexander, J.R. Keiser, and R.K. Nanstad, Low temperature aging behavior of type 308 stainless steel weld metal, Acta Metall. Mater. 39 (1991), pp. 503–516.10.1016/0956-7151(91)90118-K
- A. Redjaïmia, A. Proult, P. Donnadieu, and J.P. Morniroli, Morphology, crystallography and defects of the intermetallic χ-phase precipitated in a duplex (δ + γ) stainless steel, J. Mat. Sci. 39 (2004), pp. 2371–2386.10.1023/B:JMSC.0000019999.27065.13
- D.M. Escriba, E. Materna-Morris, R.L. Plaut, and A.F. Padilha, Chi-phase precipitation in a duplex stainless steel, Mater. Charact. 60 (2009), pp. 1214–1219.10.1016/j.matchar.2009.04.013
- A. Redjaïmia, J.P. Morniroli, P. Donnadieu, and G. Metauer, Microstructural and analytical study of heavily faulted Frank-Kasper R-phase precipitates in the ferrite of a duplex stainless steel, J. Mat. Sci. 37 (2002), pp. 4079–4091.10.1023/A:1020023500133
- A. Redjaïmia, P. Ruterana, G. Metauer, and M. Gantois, Identification and characterization of a novel intermetallic compound in a Fe-22 wt % Cr-5 wt % Ni-3 wt % Mo-0.03 wt % C duplex stainless steel, Philos. Mag. A 67 (1993), pp. 1277–1286.10.1080/01418619308224771
- J.S. Kasper, The ordering of atoms in the chi-phase of the iron–chromium–molybdenum system, Acta Metall. 2 (1954), pp. 456–461.10.1016/0001-6160(54)90066-8
- S. Takeda and N. Yukawa, Studies on Cr–Mo–Fe super-heat-resisting alloys (1st Report). The equilibrium diagram of Cr–Mo–Fe system, J. Japan Inst. Metals 21 (1957), pp. 275–279. (in Japanese)
- S. Liu, Y. Hamaguchi, and H. Kuwano, Experimental determination of the phase boundaries of intermetallic compounds in the ternary Fe–Cr–Mo system, J. Japan. Inst. Metals 50 (1986), pp. 1023–1031 (in Japanese) .
- J.O. Andersson and N. Lange, An experimental study and a thermodynamic evaluation of the Fe–Cr–Mo system, Metall. Trans. A 19 (1988), pp. 1385–1394.10.1007/BF02674012
- V. Raghavan, Cr–Fe–Mo (chromium–iron–molybdenum), J. Phase Equilib. 15 (1994), pp. 532–533.10.1007/BF02649410
- J. Janovec, B. Richarz, and H.J. Grabke, Some aspects of intermetallic phase precipitation in a 12% Cr-steel, Scr. Metall. Mater. 33 (1995), pp. 295–300.10.1016/0956-716X(95)00137-K
- P. Liu, A.H. Stigenberg, and J.-O. Nilsson, Quasicrystalline and crystalline precipitation during isothermal tempering in a 12Cr-9Ni-4Mo maraging stainless steel, Acta Metall. Mater. 43 (1995), pp. 2881–2890.10.1016/0956-7151(94)00461-P
- Y.J. Oh, W.S. Ryu, C. Sung, I.H. Kuk, and J.H. Hong, Grain boundary filmlike Fe–Mo–Cr phase in nitrogen-added type 316L stainless steels, J. Mater. Res. 14 (1999), pp. 390–397.10.1557/JMR.1999.0057
- P. Donnadieu and A. Redjaïmia, A new example of non-crystalline microstructure in metallurgy, J. Phys. I France, 5 (1995), pp. 1–6.
- A. Hirata, Y. Hirotsu, K. Amiya, and A. Inoue, Crystallization process and glass stability of an Fe48Cr15Mo14C15B6Tm2 bulk metallic glass, Phys. Rev. B 78 (2008), pp. 144205–1–144205-6.
- A. Hirata, Y. Hirotsu, K. Amiya, and A. Inoue, Nanoscale metastable state exhibiting pseudotenfold diffraction pattern in Fe-based bulk metallic glass, Phys. Rev. B 79 (2009), pp. 020205–1–020205-4.