Grain boundary engineering: fatigue fracture

References

• A. Das, S. Sivaprasad, P.C. Chakraborti, and S. Tarafder, Morphologies and characteristics of deformation induced martensite during low cycle fatigue behaviour of austenitic stainless steel, Mat. Sci. Eng. A 528 (2011), pp. 7909–7914.10.1016/j.msea.2011.07.011
   Web of Science ®Google Scholar
• A. Das, S. Sivaprasad, P.C. Chakraborti, and S. Tarafder, Connection between deformation-induced dislocation substructures and martensite formation in stainless steel, Philos. Mag. Lett. 91 (2011), pp. 664–675.10.1080/09500839.2011.608385
   Web of Science ®Google Scholar
• A. Das and S. Tarafder, Experimental investigation on martensitic transformation and fracture morphologies of austenitic stainless steel, Int. J. Plast 25 (2009), pp. 2222–2247.10.1016/j.ijplas.2009.03.003
   Web of Science ®Google Scholar
• A. Das, S. Sivaprasad, M. Ghosh, P.C. Chakraborti, S. Tarafder, Morphologies and characteristics of deformation induced martensite during tensile deformation of 304 LN stainless steel, Mat. Sci. Eng. A 486 (2008), pp. 283–286.10.1016/j.msea.2007.09.005
   Web of Science ®Google Scholar
• A. Das, P.C. Chakraborti, S. Tarafder, and H.K.D.H. Bhadeshia, Analysis of deformation induced martensitic transformation in stainless steels, Mater. Sci. Technol. 27 (2011), pp. 366–370.10.1179/026708310X12668415534008
   Web of Science ®Google Scholar
• A. Das, S. Tarafder, and P.C. Chakraborti, Estimation of deformation induced martensite in austenitic stainless steels, Mat. Sci. Eng. A 529 (2011), pp. 9–20.10.1016/j.msea.2011.08.039
   Web of Science ®Google Scholar
• A. Das, Resurgence of texture in cyclically deformed austenite, Mater. Charact. 123 (2017), pp. 315–327.10.1016/j.matchar.2016.11.037
   Web of Science ®Google Scholar
• M. Topic, R.B. Tait, and C. Allen, The fatigue behaviour of metastable (AISI-304) austenitic stainless steel wires, Int. J. Fatigue 29 (2007), pp. 656–665.10.1016/j.ijfatigue.2006.07.007
   Web of Science ®Google Scholar
• A. Das, Magnetic properties of cyclically deformed austenite, J. Magn. Magn. Mater. 361 (2014), pp. 232–242.10.1016/j.jmmm.2014.02.006
   Web of Science ®Google Scholar
• H. Mughrabi and H.-J. Christ, Cyclic deformation and microstructure, Cyclic Deformation and Fatigue of Selected Ferritic and Austenitic Steels: Specific Aspects, ISIJ Int. 37 (1997), pp. 1154–1169.
   Google Scholar
• G.R. Chanani, D.A. Stephen, and W.W. Gerberich, Fatigue crack propagation in trip steels, Metall. Trans. 3 (1972), pp. 2661–2672.10.1007/BF02644242
   Web of Science ®Google Scholar
• G. Baudry and A. Pineau, Influence of strain-induced martensitic transformation on the low-cycle fatigue behavior of a stainless steel, Mater. Sci. Eng. 28 (1977), pp. 229–242.10.1016/0025-5416(77)90176-8
   Google Scholar
• M. Bayerlein, H.-J. Christ, and H. Mughrabi, Plasticity-induced martensitic transformation during cyclic deformation of AISI 304L stainless steel, Mater. Sci. Eng. A 114 (1989), pp. L11–L16.10.1016/0921-5093(89)90871-X
   Google Scholar
• A. Das, Enigma of dislocation patterning due to slip in fatigued austenite, Int. J. Dam. Mech. (2016), pp. 1–20. doi:10.1177/1056789516674765.
   Google Scholar
• A. Das, Revisiting stacking fault energy of steels, Metall. Mater. Trans. A 47 (2016), pp. 748–768.10.1007/s11661-015-3266-9
   Web of Science ®Google Scholar
• J.F. Breedis, Influence of dislocation substructure on the martensitic transformation in stainless steel, Acta Metall. 13 (1965), pp. 239–250.10.1016/0001-6160(65)90201-4
   Google Scholar
• H.M. Otte, The formation of stacking faults in austenite and its relation to martensite, Acta Metall. 5 (1957), pp. 614–627.10.1016/0001-6160(57)90108-6
   Google Scholar
• T. Watanabe, The impact of grain boundary character distribution on fracture in polycrystals, Mater. Sci. Eng. A 176 (1994), pp. 39–49.10.1016/0921-5093(94)90957-1
   Web of Science ®Google Scholar
• S. Suresh and R.O. Ritchie, Propagation of short fatigue cracks, Int. Met. Rev. 29 (1984), pp. 445–475.
   Google Scholar
• S. Kobayashi, A. Kamata, and T. Watanabe, A mechanism of grain growth-assisted intergranular fatigue fracture in electrodeposited nanocrystalline nickel–phosphorus alloy, Acta Mater. 91 (2015), pp. 70–82.10.1016/j.actamat.2015.03.028
   Web of Science ®Google Scholar
• T. Hanlon, Y.-N. Kwon, and S. Suresh, Grain size effects on the fatigue response of nanocrystalline metals, Scr. Mater. 49 (2003), pp. 675–680.10.1016/S1359-6462(03)00393-2
   Web of Science ®Google Scholar
• D.L. Engelberg, R.C. Newman, and T.J. Marrow, Effect of thermomechanical process history on grain boundary control in an austenitic stainless steel, Scripta Mater. 59 (2008), pp. 554–557.10.1016/j.scriptamat.2008.05.012
   Google Scholar
• E.O. Hall, The deformation and ageing of mild steel: iii discussion of results, Proc. Phys. Soc. London, Sect. B 64 (1951), pp. 747–753.10.1088/0370-1301/64/9/303
   Google Scholar
• N.J. Petch, The cleavage strength of polycrystals, J. Iron Steel Inst. 174 (1953), pp. 25–28.
   Web of Science ®Google Scholar
• M.F. Ashby, The deformation of plastically non-homogeneous materials, Phil. Mag. 21 (1970), pp. 399–424.10.1080/14786437008238426
   Google Scholar
• J.C.M. Li and Y.T. Chou, The role of dislocations in the flow stress grain size relationships, Met. Mat. Trans. 1 (1970), pp. 1145–1159.
   Web of Science ®Google Scholar
• T. Watanabe, S. Tsurekawa, S. Kobayashi, and S.-I. Yamaura, Structure-dependent grain boundary deformation and fracture at high temperatures, Mater. Sci. Eng. A 410–411 (2005), pp. 140–147.10.1016/j.msea.2005.08.083
   Web of Science ®Google Scholar
• H. Gleiter, Int. J. Mater. Res., Advanced Structural and Functional Materials. Springer, Berlin Heidelberg, 1991, pp. 1–37.10.1007/978-3-642-49261-7
   Google Scholar
• Z.F. Zhang and Z.G. Wang, Grain boundary effects on cyclic deformation and fatigue damage, Prog. Mater. Sci. 53 (2008), pp. 1025–1099.10.1016/j.pmatsci.2008.06.001
   Web of Science ®Google Scholar
• T.R. Bieler, P. Eisenlohr, F. Roters, D. Kumar, D.E. Mason, M.A. Crimp, and D. Raabe, The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals, Int. J. Plasticity 25 (2009), pp. 1655–1683.10.1016/j.ijplas.2008.09.002
   Web of Science ®Google Scholar
• M. Frary, Crystallographically consistent percolation theory for grain boundary networks, PhD thesis, Massachusetts Institute of Technology, Massachusetts Avenue, Cambridge, MA, USA, 2005.
   Google Scholar
• M.D. Sangid, T. Ezaz, H. Sehitoglu, and I.M. Robertson, Energy of slip transmission and nucleation at grain boundaries, Acta Mater. 59 (2011), pp. 283–296.10.1016/j.actamat.2010.09.032
   Web of Science ®Google Scholar
• M.A. Asle Zaeem, H. El Kadiri, P.T. Wang, and M.F. Horstemeyer, Investigating the effects of grain boundary energy anisotropy and second-phase particles on grain growth using a phase-field model, Comput. Mater. Sci. 50 (2011), pp. 2488–2492.10.1016/j.commatsci.2011.03.031
   Web of Science ®Google Scholar
• S. Kobayashi, M. Hirata, S. Tsurekawa, and T. Watanabe, Grain boundary engineering for control of fatigue crack propagation in austenitic stainless steel, Procedia Eng. 10 (2011), pp. 112–117.10.1016/j.proeng.2011.04.021
   Google Scholar
• M. Suzuki and H. Takahashi, Fatigue and electrical resistivity of copper electrodeposits, Z. Metallkunde 57 (1966), pp. 484–487.
   Google Scholar
• Y. Yang, B. Imasogie, G.J. Fan, P.K. Liaw, and W.O. Soboyejo, Fatigue and fracture of a bulk nanocrystalline NiFe alloy, Metall. Mater. Trans. A 39 (2008), pp. 1145–1156.10.1007/s11661-008-9487-4
   Web of Science ®Google Scholar
• T. Angel, Formation of martensite in austenitic stainless steels-effects of deformation, temperature, and composition, J. Iron Steel Inst. 177 (1954), pp. 165–174.
   Web of Science ®Google Scholar
• A. Das, Dislocation configurations through austenite grain misorientations, Int. J. Fatigue 70 (2015), pp. 473–479.10.1016/j.ijfatigue.2014.06.012
   Web of Science ®Google Scholar
• A. Das, Slip system activity during cyclic plasticity, Metall. Mater. Trans. A 45 (2014), pp. 2927–2930.10.1007/s11661-014-2295-0
   Web of Science ®Google Scholar
• J. Talonen, P. Aspegren, and H. Hänninen, Comparison of different methods for measuring strain induced α’-martensite content in austenitic steels. Mater. Sci. Tech. 20 (2004), pp. 1506–1512.
   Google Scholar
• E.E. Underwood and K. Banerji, Quantitative fractography, ASM Handbook. 12 (1987), pp. 193–210.
   Google Scholar
• A. El Bartali, V. Aubin, L. Sabatier, P. Villechaise, and S. Degallaix-Moreuil, Identification and analysis of slip systems activated during low-cycle fatigue in a duplex stainless steel, Scr. Mater. 59 (2008), pp. 1231–1234.10.1016/j.scriptamat.2008.07.044
   Web of Science ®Google Scholar
• M.C. Marinelli, A. El Bartali, J.W. Signorelli, P. Evrard, V. Aubin, I. Alvarez-Armas, and S. Degallaix-Moreuil, Activated slip systems and microcrack path in LCF of a duplex stainless steel, Mater. Sci. Eng. A 509 (2009), pp. 81–88.10.1016/j.msea.2009.01.012
   Web of Science ®Google Scholar
• D.G. Brandon, The structure of high-angle grain boundaries, Acta Metall. 14 (1966), pp. 1479–1484.10.1016/0001-6160(66)90168-4
   Google Scholar
• P. Fortier, W.A. Miller, and K.T. Aust, Triple junction and grain boundary character distributions in metallic materials, Acta Mater. 45 (1997), pp. 3459–3467.10.1016/S1359-6454(97)00004-9
   Web of Science ®Google Scholar
• A. Das, Phase transformation during tensile and low cycle fatigue deformation of AISI 304LN stainless steel, PhD Thesis, Jadavpur University, Kolkata, 2013.
   Google Scholar
• S. Ganesh Sundara Raman and K.A. Padmanabhan, Influence of martensite formation and grain size on room temperature low cycle fatigue behaviour of AISI 304LN austenitic stainless steel, Mater. Sci. Technol. 10 (1994), pp. 614–620.10.1179/mst.1994.10.7.614
   Web of Science ®Google Scholar
• Y. Murakami and K.J. Miller, What is fatigue damage? A view point from the observation of low cycle fatigue process, Inter. J. Fatigue 27 (2005), pp. 991–1005.10.1016/j.ijfatigue.2004.10.009
   Web of Science ®Google Scholar
• A. Das, Martensite–Void interaction, Scr. Mater. 68 (2013), pp. 514–517.10.1016/j.scriptamat.2012.11.039
   Web of Science ®Google Scholar
• A. Das, Crystallographic variant selection of martensite at high stress/strain, Philos. Mag. 95 (2015), pp. 2210–2227.10.1080/14786435.2015.1042938
   Web of Science ®Google Scholar
• A. Das, Crystallographic variant selection of martensite during fatigue deformation, Philos. Mag. 95 (2015), pp. 844–860.10.1080/14786435.2015.1008069
   Web of Science ®Google Scholar
• A. Das, Spatial martensite, Mater. Sci. Eng. A 658 (2016), pp. 484–489.10.1016/j.msea.2016.01.072
   Web of Science ®Google Scholar
• A. Das, Intervention of martensite variants on the spatial aspect of microvoids, Mater. Res. Express 3 (2016), pp. 066501-1–066501-15.10.1088/2053-1591/3/6/066501
   Google Scholar
• N.Q. Vo, R.S. Averback, P. Bellon, S. Odunuga, and A. Caro, Quantitative description of plastic deformation in nanocrystalline Cu: Dislocation glide vs. grain boundary sliding, Phy. Rev. 77 (2008), pp. 134108-1–134108-9.
   Web of Science ®Google Scholar
• M.D. Sangid, H.J. Maier, and H. Sehitoglu, The role of grain boundaries on fatigue crack initiation–An energy approach, Inter. J. Plast. 27 (2011), pp. 801–821.10.1016/j.ijplas.2010.09.009
   Web of Science ®Google Scholar
• J. Miao, T.M. Pollock, and J.W. Wayne Jones, Crystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature, Acta Mater. 57 (2009), pp. 5964–5974.10.1016/j.actamat.2009.08.022
   Web of Science ®Google Scholar
• T. Watanabe, Grain boundary engineering: historical perspective and future prospects, J. Mater. Sci. 46 (2011), pp. 4095–4115.10.1007/s10853-011-5393-z
   Web of Science ®Google Scholar
• P.H. Pumphrey and H. Gleiter, The annealing of dislocations in high-angle grain boundaries, Philos. Mag. 30 (1974), pp. 593–602.10.1080/14786439808206584
   Web of Science ®Google Scholar
• Z. Nishiyama, Martensitic transformation, M. Fine, M. Meshii, and C. Wayman, eds., Academic Press, Inc. (London) Ltd 1978.
   Google Scholar
• G. Thomas and C. Vercaemer, Enhanced strengthening of a spinodal fe-ni-cu alloy by martensitic transformation, Metall. Trans. 3 (1972), pp. 2501–2506.10.1007/BF02647055
   Web of Science ®Google Scholar
• W.C. Leslie and R.L. Miller, The stabilization of austenite by closely spaced boundaries, ASM Trans. Q 57 (1964), pp. 972–979.
   Google Scholar
• H.-S. Yang and H.K.D.H. Bhadeshia, Austenite grain size and the martensite-start temperature, Scr. Mater. 60 (2009), pp. 493–495.10.1016/j.scriptamat.2008.11.043
   Web of Science ®Google Scholar
• A. Das and S. Tarafder, Geometry of dimples and its correlation with mechanical properties in austenitic stainless steel, Scr. Mater. 59 (2008), pp. 1014–1017.10.1016/j.scriptamat.2008.07.012
   Web of Science ®Google Scholar
• A. Das, S.K. Das, S. Sivaprasad, and S. Tarafder, Fracture-property correlation in copper-strengthened high-strength low-alloy steel, Scr. Mater. 59 (2008), pp. 681–683.10.1016/j.scriptamat.2008.05.043
   Web of Science ®Google Scholar
• A. Das, S. Sivaprasad, P.C. Chakraborti, and S. Tarafder, Correspondence of fracture surface features with mechanical properties in 304LN stainless steel, Mater. Sci. Eng. A 496 (2008), pp. 98–105.10.1016/j.msea.2008.05.007
   Web of Science ®Google Scholar
• A. Das, S.K. Das, and S. Tarafder, Correlation of fractographic features with mechanical properties in systematically varied microstructures of Cu-strengthened high-strength low-alloy steel, Metall. Mater. Trans. A 40 (2009), pp. 3138–3146.10.1007/s11661-009-9999-6
   Web of Science ®Google Scholar
• A. Das and P. Poddar, Structure–wear-property correlation, Mater. Des. 47 (2013), pp. 557–565.10.1016/j.matdes.2012.12.041
   Web of Science ®Google Scholar
• G. Sanyal, A. Das, J.B. Singh, and J.K. Chakravartty, Effect of notch geometry on fracture features, Mater. Sci. Eng. A 641 (2015), pp. 210–214.10.1016/j.msea.2015.06.044
   Web of Science ®Google Scholar
• A. Das, Contribution of deformation-induced martensite to fracture appearance of austenitic stainless steel, Mater. Sci. Tech. 32 (2016), pp. 1366–1373.
   Google Scholar
• A. Das and J.K. Chakravartty, Correlation of fracture features with mechanical properties as a function of strain rate in zirconium alloys, Inter. J. Mater. Res. 107 (2016), pp. 184–188.10.3139/146.111331
   Web of Science ®Google Scholar
• ASM Handbook, 19, Fatigue and Fracture, ASM International, 1996.
   Google Scholar
• J.C. McMillan and R.M.N Pelloux, Fatigue crack propagation under program and random loads. In Fatigue Crack Propagation, STP 415, ASTM, 505 (1967).
   Google Scholar
• M. Shimojo, Y. Uchida, S. Turuoka, and Y. Higo, Fatigue striation formation in an Fe-3% Si alloy-effects of crystallographic orientation and neighbouring grains, Fat. Fract. Eng. Mat. Str. 22 (1999), pp. 153–159.10.1046/j.1460-2695.1999.00150.x
   Web of Science ®Google Scholar
• P.J.E. Forsyth and D.A. Ryder, Some results of the examination of aluminum alloy specimen fracture surfaces, Metallurgia 63 (1961), pp. 117–124.
   Google Scholar
• J.J. Au, and J.S. Ke, Correlation between fatigue crack growth rate and fatigue striation spacing in AISI 9310 (AMS6265) steel, in ASTM STP733, (1980) pp. 202–221.
   Google Scholar
• R.C. Bates and W.G. Clark Jr., Transactions Quarterly. ASM 62 (1969), pp. 380–389.
   Google Scholar
• R.W. Hertzberg and E.F. Von Euw, Crack closure and fatigue striations in 2024-T3 aluminum alloy, Metall. Trans. 4 (1973), pp. 887–889.10.1007/BF02643104
   Web of Science ®Google Scholar
• J. Forth, and W. Schutz, Crack Propagation Under Constant and Variable Stress Amplitudes: A Comparison of Calculations Based on the Striation Spacing and Tests, AGARD (NATO), vol. CP-376, No. CP-376 (1984) pp. 17.1–17.9.
   Google Scholar
• F. Alexandre, S. Deyber, and A. Pineau, Modelling the optimum grain size on the low cycle fatigue life of a Ni based superalloy in the presence of two possible crack initiation sites, Scr. Mater. 50 (2004), pp. 25–30.10.1016/j.scriptamat.2003.09.043
   Web of Science ®Google Scholar
• S. Kobayashi, T. Inomata, H. Kobayashi, S. Tsurekawa, and T. Watanabe, Effects of grain boundary-and triple junction-character on intergranular fatigue crack nucleation in polycrystalline aluminium, J. Mater. Sci. 43 (2008), pp. 3792–3799.10.1007/s10853-007-2236-z
   Web of Science ®Google Scholar
• B. Tomkins, Fatigue crack propagation – an analysis, Philos. Mag. 18 (1968), pp. 1041–1066.10.1080/14786436808227524
   Web of Science ®Google Scholar
• A.W. Thompson, The influence of grain and tilt boundaries in fatigue cracking, Acta Metall. 20 (1972), pp. 1085–1094.10.1016/0001-6160(72)90172-1
   Google Scholar
• H. Mughrabi, Cyclic slip irreversibilities and the evolution of fatigue damage, Metall. Mater. Trans. A 40 (2009), pp. 1257–1279.10.1007/s11661-009-9839-8
   Web of Science ®Google Scholar
• G. Dorr and C. Blochwitz, Microcracks in fatigued FCC polycrystals by interaction between persistent slip bands and grain boundaries, Cryst. Res. Technol. 22 (1987), pp. 113–121.10.1002/(ISSN)1521-4079
   Web of Science ®Google Scholar
• C. Blochwitz, J. Brechbuhl, and W. Tirschler, Misorientation measurements near grain boundary cracks after fatigue tests, Strength Mater. 27 (1995), pp. 3–13.10.1007/BF02206406
   Google Scholar
• R. Koterazawa, M. Mori, T. Matsui, and D. Shimo, Fractographic study of fatigue crack propagation, J. Eng. Mater. Technol. 95 (1973), pp. 202–212.10.1115/1.3443154
   Web of Science ®Google Scholar
• U. Krupp, Acta Mater., WILEY-VCH Verlag GmbH & Co., Kga A, Weinheim Germany, 2007.10.1002/9783527610686
   Google Scholar
• T.S. Gross and S. Lampman, Micromechanisms of monotonic and cyclic crack growth, ASM handbook 19 (1996), pp. 42–60.
   Google Scholar
• M. Kumar, W.E. King, and A.J. Schwartz, Modifications to the microstructural topology in fcc materials through thermo mechanical processing, Acta Mater. 48 (2000), pp. 2081–2091.10.1016/S1359-6454(00)00045-8
   Web of Science ®Google Scholar
• R.W. Minich, C.A. Schuh, and M. Kumar, Role of topological constraints on the statistical properties of grain boundary networks, Phys. Rev. B 66 (2002), pp. 052101-1–052101-4.10.1103/PhysRevB.66.052101
   Google Scholar
• C.A. Schuh, R.W. Minich, and M. Kumar, Connectivity and percolation in simulated grain-boundary networks, Philos. Mag. 83 (2003), pp. 711–726.10.1080/0141861021000056681
   Web of Science ®Google Scholar
• M. Frary and C.A. Schuh, Connectivity and percolation behaviour of grain boundary networks in three dimensions, Philos. Mag. 85 (2005), pp. 1123–1143.10.1080/14786430412331323564
   Web of Science ®Google Scholar
• L. Llanes and C. Laird, The role of annealing twin boundaries in the cyclic deformation of fcc materials, Mater. Sci. Eng. A 157 (1992), pp. 21–27.10.1016/0921-5093(92)90094-H
   Web of Science ®Google Scholar
• A. Pineau, In: Ostoja-Starzewski, M. (ed.), Mechanics of Random and Multiscale Microstructures. CISM, 163–220 (1993).
   Google Scholar
• C. Laird and L. Buchinger, Hardening behavior in fatigue, Metall. Trans. A 16 (1985), pp. 2201–2214.10.1007/BF02670419
   Web of Science ®Google Scholar
• S. Kobayashi, S. Tsurekawa, T. Watanabe, and G. Palumbo, Grain boundary engineering for control of sulfur segregation-induced embrittlement in ultrafine-grained nickel, Scr. Mater. 62 (2010), pp. 294–297.10.1016/j.scriptamat.2009.11.022
   Web of Science ®Google Scholar
• B.B. Rath, M.A. Imam, and C.S. Pande, Nucleation and growth of twin interfaces in fcc metals and alloys, Mater. Phys. Mech. 1 (2000), pp. 61–66.
   Google Scholar
• G. Palumbo, E.M. Lehockey, and P. Lin, Applications for grain boundary engineered materials, J. Mat. 50 (1998), pp. 40–43.
   Web of Science ®Google Scholar
• V. Randle, P.R. Rios, and Y. Hu, Grain growth and twinning in nickel, Scr. Mater. 58 (2008), pp. 130–133.10.1016/j.scriptamat.2007.09.016
   Web of Science ®Google Scholar
• R.C. Boettner, A.J. McEvily Jr, and Y.C. Liu, On the formation of fatigue cracks at twin boundaries, Philos. Mag. 10 (1964), pp. 95–106.10.1080/14786436408224210
   Web of Science ®Google Scholar
• P.H. Pumphrey and K.M. Bowkett, Observation of partial dislocations on a coherent twin boundary, Philos. Mag. 24 (1971), pp. 225–230.10.1080/14786437108227382
   Web of Science ®Google Scholar
• V. Randle, Twinning-related grain boundary engineering, Acta Mater. 52 (2004), pp. 4067–4081.10.1016/j.actamat.2004.05.031
   Web of Science ®Google Scholar
• A. Das, V. Verma, and C.B. Basak, Elucidating microstructure of spinodal copper alloy through annealing, Mater. Char. 120 (2016), pp. 152–158.10.1016/j.matchar.2016.08.021
   Web of Science ®Google Scholar
• V.Y. Gertsman and C.H. Henager Jr., Grain boundary junctions in microstructure generated by multiple twinning, Interf. Sci. 11 (2003), pp. 403–415.10.1023/A:1026191810431
   Google Scholar
• L.L. Li, Z.J. Zhang, P. Zhang, and Z.F. Zhang, Higher fatigue cracking resistance of twin boundaries than grain boundaries in Cu bicrystals, Scr. Mater. 65 (2011), pp. 505–508.10.1016/j.scriptamat.2011.06.009
   Web of Science ®Google Scholar
• A. Heinz and P. Neumann, Crack initiation during high cycle fatigue of an austenitic steel, Acta Met. Mat. 38 (1990), pp. 1933–1940.10.1016/0956-7151(90)90305-Z
   Google Scholar
• H. Mughrabi, R. Wang, N. Hansen, A. Horsewell, T. Leffers and H. Lilholt (eds.), Deformation of Polycrystals: Mechanisms and Microstructures, Proc. 2nd Riso Int. Symp. On Metallurgy and Materials Science, September 1981, Riso national Laboratory, Riso 87 (1981).
   Google Scholar
• J.C. Figueroa and C. Laird, The cyclic stress-strain response of copper at low strains – II, Variable amplitude testing, Acta Met. 29 (1981), pp. 1679–1684.
   Google Scholar
• J.L. Bair, S.L. Hatch, and D.P. Field, Formation of annealing twin boundaries in nickel, Scr. Mater. 81 (2014), pp. 52–55.10.1016/j.scriptamat.2014.03.008
   Web of Science ®Google Scholar
• L. Jiang, H. Wang, P.K. Liaw, C.R. Brooks, and D.L. Klarstrom, Temperature evolution during low-cycle fatigue of ULTIMET® alloy: experiment and modelling, Mech. Mater. 36 (2004), pp. 73–84.10.1016/S0167-6636(03)00032-2
   Web of Science ®Google Scholar
• G. Meneghetti and M. Ricotta, The use of the specific heat loss to analyse the low-and high-cycle fatigue behaviour of plain and notched specimens made of a stainless steel, Eng. Fract. Mech. 81 (2012), pp. 2–16.10.1016/j.engfracmech.2011.06.010
   Web of Science ®Google Scholar
• M. Amiri and M.M. Khonsari, Rapid determination of fatigue failure based on temperature evolution: Fully reversed bending load, Inter. J. Fatigue 32 (2010), pp. 382–389.10.1016/j.ijfatigue.2009.07.015
   Web of Science ®Google Scholar
• M. Kumar, A.J. Schwartz, and W.E. King, Microstructural evolution during grain boundary engineering of low to medium stacking fault energy fcc materials, Acta Mater. 50 (2002), pp. 2599–2612.10.1016/S1359-6454(02)00090-3
   Web of Science ®Google Scholar
• X.H. An, Q.Y. Lin, S.D. Wu, and Z.F. Zhang, Mechanically driven annealing twinning induced by cyclic deformation in nanocrystalline Cu, Scr. Mater. 68 (2013), pp. 988–991.10.1016/j.scriptamat.2013.02.053
   Web of Science ®Google Scholar
• Q.S. Pan and L. Lu, Strain-controlled cyclic stability and properties of Cu with highly oriented nanoscale twins, Acta Mater. 81 (2014), pp. 248–257.10.1016/j.actamat.2014.08.011
   Web of Science ®Google Scholar
• T. Watanabe, An approach to grain boundary design for strong and ductile polycrystals, Res. Mech. 11 (1984), pp. 47–84.
   Google Scholar
• L.E. Murr, Interfacial phenomena in metal and alloys. Reading, MA: Addison Wesley., 1975 [Reprinted by Teck books, Fairfax, VA, 1991.].
   Google Scholar
• S. Kobayashi, M. Nakamura, S. Tsurekawa, and T. Watanabe, Effect of grain boundary microstructure on fatigue crack propagation in austenitic stainless steel, J. Mater. Sci. 46 (2011), pp. 4254–4260.10.1007/s10853-010-5238-1
   Web of Science ®Google Scholar
• W.H. Kim and C. Laird, Crack nucleation and stage I propagation in high strain fatigue – I, Microscopic and interferometric observations, Acta Met. 26 (1978), pp. 777–787.
   Google Scholar
• A.J. McEvily, S. Ishihara, M. Endo, H. Sakai, and H. Matsunaga, On one-and two-parameter analyses of short fatigue crack growth, Inter. J. Fatigue 29 (2007), pp. 2237–2245.10.1016/j.ijfatigue.2006.11.012
   Web of Science ®Google Scholar
• D.L. McDowell and F.P.E. Dunne, Microstructure-sensitive computational modeling of fatigue crack formation, Inter. J. Fatigue 32 (2010), pp. 1521–1542.10.1016/j.ijfatigue.2010.01.003
   Web of Science ®Google Scholar
• S. Kobayashi, S. Tsurekawa, and T. Watanabe, Structure-dependent triple junction hardening and intergranular fracture in molybdenum, Philos. Mag. 86 (2006), pp. 5419–5429.10.1080/14786430600672711
   Web of Science ®Google Scholar
• V. Randle, The influence of grain junctions and boundaries on superplastic deformation, Acta Met. Mat. 43 (1995), pp. 1741–1749.10.1016/0956-7151(94)00414-D
   Google Scholar
• L.C. Lim and T. Watanabe, Grain boundary character distribution controlled toughness of polycrystals - A two-dimensional model, Scr. Met. 23 (1989), pp. 489–494.10.1016/0036-9748(89)90438-9
   Google Scholar
• L.C. Lim, Surface intergranular cracking in large strain fatigue, Acta Metall. 35 (1987), pp. 1653–1662.
   Google Scholar
• W. Zhongguang, W. Guonan, K. Wei, and H. Haicai, Influence of the martensite content on the fatigue behaviour of a dual-phase steel, Mater. Sci. Eng. 91 (1987), pp. 39–44.10.1016/0025-5416(87)90281-3
   Google Scholar
• Z.F. Zhang and Z.G. Wang, Comparison of fatigue cracking possibility along large-and low-angle grain boundaries, Mater. Sci. Eng. A 284 (2000), pp. 285–291.10.1016/S0921-5093(00)00796-6
   Web of Science ®Google Scholar
• M. Frary and C.A. Schuh, Grain boundary networks: Scaling laws, preferred cluster structure, and their implications for grain boundary engineering, Acta Mater. 53 (2005), pp. 4323–4335.10.1016/j.actamat.2005.05.030
   Web of Science ®Google Scholar
• C.A. Schuh, M. Kumar, and W.E. King, Analysis of grain boundary networks and their evolution during grain boundary engineering, Acta Mater. 51 (2003), pp. 687–700.10.1016/S1359-6454(02)00447-0
   Web of Science ®Google Scholar
• X. Fang, K. Zhang, W. Wang, and B. Zhou, Twin-induced grain boundary engineering in 304 stainless steel, Mater. Sci. Eng. A 487 (2008), pp. 7–13.10.1016/j.msea.2007.09.075
   Web of Science ®Google Scholar