251
Views
7
CrossRef citations to date
0
Altmetric
Part A: Materials Science

Observations of the stress developed in Si inclusions following plastic flow in the matrix of an Al–Si–Mg alloy

, , , , &
Pages 1398-1417 | Received 04 Aug 2016, Accepted 14 Feb 2017, Published online: 10 Apr 2017

References

  • S.M. Pickard, S. Schmauder, D.B. Zahl, and A.G. Evans, Effects of misfit strain and reverse loading on the flow strength of particulate-reinforced Al matrix composites, Acta Metall. Mater. 40 (1992), pp. 3113–3119.10.1016/0956-7151(92)90474-S
  • M.E. Fitzpatrick, P.J. Withers, A. Baczmanski, M.T. Hutchings, R. Levy, M. Ceretti, and A. Lodini, Changes in the misfit stress in an Al/SiCp metal matrix composite under plastic strain, Acta Mater. 50 (2002), pp. 1031–1040.10.1016/S1359-6454(01)00401-3
  • J. Orr and D.K. Brown, Elasto-plastic solution for a cylindrical inclusion in plane strain, Eng. Fracture Mech. 6 (1974), pp. 261–274.10.1016/0013-7944(74)90024-1
  • A.S. Argon, J. Im, and R. Safoglu, Cavity formation from inclusions, Metall. Trans. A 6 (1975), pp. 825–837.10.1007/BF02672306
  • R.D. Thomson and J.W. Hancock, Local stress and strain fields near a spherical elastic inclusion in a plastically deforming matrix, Int. J. Fracture 24 (1984), pp. 209–228.10.1007/BF00032684
  • A.A. Benzerga and J.B. Leblond, Ductile fracture by void growth to coalescence, Adv. Appl. Mech. 44 (2010), pp. 169–305.10.1016/S0065-2156(10)44003-X
  • R.W. Coade, J.R. Griffiths, B.A. Parker, and P.J. Stevens, Inclusion stresses in a 2-phase alloy deformed to a plastic strain of 1%, Philos. Mag. A 44 (1981), pp. 357–372.10.1080/01418618108239538
  • S.J. Harris, A. O’Neill, J. Boileau, W. Donlon, X. Su, and B.S. Majumdar, Application of the Raman technique to measure stress states in individual Si particles in a cast Al–Si alloy, Acta Mater. 55 (2006), pp. 1681–1693.
  • A. Pyzalla, A. Jacques, J.-P. Feiereisen, T. Buslaps, T. D’Almeida, and K.-D. Liss, In-situ analysis of the microstrains during tensile deformation of an AlSi-MMC at room temperature and elevated temperature, J. Neutron Res. 9 (2001), pp. 435–442.10.1080/10238160108200175
  • A. Gangulee and J. Gurland, On the fracture of silicon particles in aluminum–silicon alloys, Trans. Met. Soc. AIME. 239 (1967), pp. 269–272.
  • C.H. Cáceres, C.J. Davidson, and J.R. Griffiths, Deformation and fracture of an Al–Si–Mg casting alloy, Mater. Sci. Eng. A 197 (1995), pp. 171–179.10.1016/0921-5093(94)09775-5
  • J.-W. Yeh and W.-P. Liu, The cracking mechanism of silicon particles in an A357 aluminium alloy, Metall. Mater. Trans. A 27 (1996), pp. 3558–3568.10.1007/BF02595447
  • T.R. Finlayson, J.R. Griffiths, D.M. Viano, M.E. Fitzpatrick, E.C. Oliver, and Q.G. Wang, The partition of stresses in Al–Si-based metal-matrix composites, in Shape Casting: 2nd International Symposium, P.N. Crepeau, M. Tiryakioglu, and J. Campbell, eds., TMS, Warrendale, PA, 2007, pp. 127–134.
  • A. Baczmanski and C. Braham, Elastoplastic properties of duplex steel determined using neutron diffraction and self-consistent model, Acta Mater. 52 (2004), pp. 1133–1142.10.1016/j.actamat.2003.10.046
  • S. Cai, M.R. Daymond, and R.A. Holt, Deformation of high β-phase fraction Zr–Nb alloys at room temperature, Acta Mater. 60 (2012), pp. 3355–3369.10.1016/j.actamat.2012.02.040
  • B.M.B. Grant, E.M. Francis, J.Q. da Fonseca, M.R. Daymond, and M. Preuss, Deformation behaviour of an advanced nickel-based superalloy studied by neutron diffraction and electron microscopy, Acta Mater. 60 (2012), pp. 6829–6841.10.1016/j.actamat.2012.09.005
  • E.C. Oliver, M.R. Daymond, and P.J. Withers, Interphase and intergranular stress generation in carbon steels, Acta Mater. 52 (2004), pp. 1937–1951.10.1016/j.actamat.2003.12.035
  • B. Closset and J.E. Gruzleski, Structure and properties of hypoeutectic Al–Si–Mg alloys modified with pure strontium, Metall. Trans. A 13 (1982), pp. 945–951.10.1007/BF02643389
  • C.H. Cáceres, C.J. Davidson, J.R. Griffiths, L.M. Hogan, and Q.G. Wang, Hypoeutectic Al–Si–Mg foundry alloys, Mater. Forum 21 (1997), pp. 27–43.
  • C.H. Cáceres, C.J. Davidson, J.R. Griffiths, and Q.G. Wang, The effect of Mg on the microstructure and mechanical behaviour of two Al–Si–Mg casting alloys, Metall. Mater. Trans. A 30 (1999), pp. 2611–2618.10.1007/s11661-999-0301-8
  • Q.G. Wang, C.H. Cáceres, and J.R. Griffiths, Damage by eutectic particle cracking in aluminium casting alloys A356/357, Metall. Mater. Trans. A 34 (2003), pp. 2901–2912.10.1007/s11661-003-0190-1
  • T. Gnäupel-Herold, P.C. Brand, and H.J. Prask, Calculation of single-crystal elastic constants for cubic crystal symmetry from powder diffraction data, J. Appl. Crystallogr. 31 (1998), pp. 929–935.10.1107/S002188989800898X
  • J.L. Tallon and A.J. Wolfenden, Temperature dependence of the elastic constants of aluminum, J. Phys. Chem. Solids 40 (1979), pp. 831–837.10.1016/0022-3697(79)90037-4
  • Properties of Silicon. EMIS Data reviews series No. 4, INSPEC, Institution of Electrical Engineers, London, 1988.
  • Y.S. Touloukian, Thermophysical properties of matter, Vol. 12 (Thermal expansion), Plenum, New York, 1975.
  • J.R. Santisteban, M.R. Daymond, J.A. James, and L.J. Edwards, ENGIN-X: a third generation neutron strain scanner, J. Appl. Crystallogr. 39 (2006), pp. 812–825.10.1107/S0021889806042245
  • S.F. Corbin and D.S. Wilkinson, The influence of particle distribution on the mechanical response of a particulate metal matrix composite, Acta Metall. Mater. 42 (1994), pp. 1319–1327.10.1016/0956-7151(94)90148-1
  • A.C. Larson and R.B. Von Dreele, General Structure Analysis System (GSAS), Report LAUR 86–748, Los Alamos National Laboratory, Los Alamos, 2004.
  • H.G. Priesmeyer, The stress-free reference sample: Alloy composition information from neutron capture, in Measurement of residual and applied stress using neutron diffraction. M.T. Hutchings and A.D. Krawitz, eds., Kluwer Academic Publishers London, 1992, pp. 277–284.10.1007/978-94-011-2797-4
  • N. Shi, M.A.M. Bourke, J.A. Roberts, and J.E. Allison, Phase-stress partition during uniaxial tensile loading of a TiC-particulate-reinforced Al composite, Metall. Mater. Trans. A 28 (1997), pp. 2741–2753.10.1007/s11661-997-0031-8
  • G. Requena, G. Garcés, M. Rodríguez, T. Pirling, and P. Cloetens, 3D architecture and load partition in eutectic Al–Si alloys, Adv. Eng. Mater. 11 (2009), pp. 1007–1014.
  • J.D. Eshelby, The determination of the elastic field of an ellipsoidal inclusion, and related problems, Proc. R. Soc. London A. 241 (1957), pp. 376–396.10.1098/rspa.1957.0133
  • M.F. Ashby, The deformation of plastically non-homogeneous materials, Philos. Mag. 21 (1970), pp. 399–424.10.1080/14786437008238426
  • L.M. Brown and W.M. Stobbs, The work-hardening of copper–silica. I. A model based on internal stresses, with no plastic relaxation, Philos. Mag. 23 (1971), pp. 1185–1199.10.1080/14786437108217405
  • L.M. Brown and W.M. Stobbs, The work-hardening of copper–silica, Philos. Mag. 23 (1971), pp. 1201–1233.10.1080/14786437108217406
  • Y. Brechet, J.D. Embury, S. Tao, and L. Luo, Damage initiation in metal matrix composites, Acta Metall. Mater. 39 (1991), pp. 1781–1786.10.1016/0956-7151(91)90146-R
  • C.H. Cáceres and J.R. Griffiths, Damage by the cracking of silicon particles in an Al–7Si–0.4 Mg casting alloy, Acta Mater. 44 (1996), pp. 25–33.10.1016/1359-6454(95)00172-8
  • M.R. Barnett, N. Stanford, A. Ghaderi, and F. Siska, Plastic relaxation of the internal stress induced by twinning, Acta Mater. 61 (2013), pp. 7859–7867.10.1016/j.actamat.2013.09.024
  • J. LLorca, J.L. Martínez, and M. Elices, Reinforcement fracture and tensile ductility in sphere-reinforced metal-matrix composites, Fatigue Fract. Eng. Mater. Struct. 20 (1997), pp. 689–702.
  • J. Segurado and J. LLorca, A computational micromechanics study of the effect of interface decohesion on the mechanical behavior of composites, Acta Mater. 53 (2005), pp. 4931–4942.10.1016/j.actamat.2005.07.013
  • B. Wilner, Asymptotic stress analysis of two phase materials, Int. J. Eng. Sci. 33 (1995), pp. 127–130.10.1016/0020-7225(93)E0036-5
  • B.J. Lee and M.E. Mear, Stress concentration induced by an elastic spheroidal particle in a plastically deforming matrix, J. Mech. Phys. Solids 47 (1999), pp. 1301–1336.10.1016/S0022-5096(98)00104-5
  • A.J. Allen, M.A.M. Bourke, S. Dawes, M.T. Hutchings, and P.J. Withers, The analysis of internal strains measured by neutron diffraction in Al/SiC metal matrix composites, Acta Metall. Mater. 40 (1992), pp. 2361–2373.10.1016/0956-7151(92)90155-8
  • M.R. Daymond and M.E. Fitzpatrick, Effect of cyclic plasticity on internal stresses in a metal matrix composite, Metall. Mater. Trans. A 37 (2006), pp. 1977–1986.
  • A. Roatta and R.E. Bolmaro, An Eshelby inclusion-based model for the study of stresses and plastic strain localization in metal matrix composites. I: General formulation and its application to round particles, Mater. Sci. Eng. A 229 (1997), pp. 182–191.10.1016/S0921-5093(96)10845-5
  • W. Zhang, X. Dai, D. Ding, P. Gao, and M. Gu, A monotonic loading approach for determining residual stresses of fiber reinforced metal matric composites, Mater. Sci. Eng. A 616 (2014), pp. 29–34.10.1016/j.msea.2014.07.083
  • R. Levy-Tubiana, A. Baczmanski, and A. Lodini, Relaxation of thermal mismatch stress due to plastic deformation in an Al/SiCp metal matrix composite, Mater. Sci. Eng. A 341 (2003), pp. 74–86.10.1016/S0921-5093(02)00204-6
  • J.J. Gilman, Direct measurements of the surface energies of crystals, J. Appl. Phys. 31 (1960), pp. 2208–2218.10.1063/1.1735524
  • J. Campbell, Entrainment defects, Mater. Sci. Technol. 22 (2006), pp. 127–145.10.1179/174328406X74248
  • J.R. Griffiths, Commentary on ‘Entrainment defects’ by J. Campbell, Mater. Sci. Technol. 22 (2006), pp. 1001–1003.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.