Texture development during cold rolling of Fe–Cr–Ni alloy-experiments and simulations

References

• R. Gunn, Duplex Stainless Steels: Microstructure, Properties and Applications, Woodhead Publ., Elsevier, Cambridge, 1997.10.1533/9781845698775
   Google Scholar
• I. Alvarez-Armas and S.D. Moreuil, Duplex Stainless Steels, ISTE Ltd, London, 2009.
   Google Scholar
• H. Hänninen, J. Romu, R. Ilola, J. Tervo, and A. Laitinen, Effects of processing and manufacturing of high nitrogen-containing stainless steels on their mechanical, corrosion and wear properties, J. Mater. Proc. Technol. 117 (2001), pp. 424–430.10.1016/S0924-0136(01)00804-4
   Web of Science ®Google Scholar
• Y. Jang, S. Kim, J. Lee, K. Kim, and J. Lee, Effect of N addition on tensile and corrosion behaviors of CD4MCU cast duplex stainless steels, Metall. Mater. Trans. A. 34 (2003), pp. 1617–1625.
   Web of Science ®Google Scholar
• R. Badji, T. Chauveau, and B. Bacroix, Texture, misorientation and mechanical anisotropy in a deformed dual phase stainless steel weld joint, Mater. Sci. Eng.: A 575 (2013), pp. 94–103.10.1016/j.msea.2013.03.018
   Web of Science ®Google Scholar
• J. Kowalska, W. Ratuszek, M. Witkowska, A. Zielińska-Lipiec, and T. Tokarski, Microstructure and texture characteristics of the metastable Fe-21Mn-3Si-3Al alloy after cold deformation, J. Alloys Compd. 643 (2015), pp. S39–S45.10.1016/j.jallcom.2015.04.086
   Web of Science ®Google Scholar
• A. Kurc-Lisiecka and E. Kalinowska-Ozgowicz, Structure and mechanical properties of austenitic steel after cold rolling, J. Achievements Mater. Manuf. Eng. 44 (2011), pp. 148–153.
   Google Scholar
• R.K. Khatirkar and S. Kumar, Comparison of recrystallization textures in interstitial free and interstitial free high strength steels, Mater. Chem. Phys. 127 (2011), pp. 128–136.10.1016/j.matchemphys.2011.01.045
   Web of Science ®Google Scholar
• I. Samajdar, B. Verlinden, L. Rabet, and P. Van Houtte, Recrystallization texture in a cold rolled commercial purity aluminum: On the plausible macro- and micro-mechanisms, Mater. Sci. Eng.: A 266 (1999), pp. 146–154.10.1016/S0921-5093(99)00022-2
   Web of Science ®Google Scholar
• T. Senuma, K. Kawasaki, and Y. Takemoto, Recrystallization behavior and texture formation of rapidly annealed cold-rolled extralow carbon steel sheets, Mater. Trans. 47 (2006), pp. 1769–1775.10.2320/matertrans.47.1769
   Web of Science ®Google Scholar
• A. Kumar, R.K. Khatirkar, D. Chalapathi, G. Kumar, and S. Suwas, Microstructure and texture development during cold rolling in UNS S32205 and UNS S32760 duplex stainless steels, Metall. Mater. Trans. A 48 (2017), pp. 2349–2362.10.1007/s11661-017-4026-9
   Web of Science ®Google Scholar
• A. Belyakov, Y. Kimura, and K. Tsuzaki, Microstructure evolution in dual-phase stainless steel during severe deformation, Acta Mater. 54 (2006), pp. 2521–2532.10.1016/j.actamat.2006.01.035
   Web of Science ®Google Scholar
• A. Belyakov, R. Kaibyshev, Y. Kimura, and K. Tsuzaki, Recrystallization mechanisms in severely deformed dual-phase stainless steel, Mater. Sci. Forum 638–642 (2010), pp. 1905–1910.10.4028/www.scientific.net/MSF.638-642
   Google Scholar
• N. Jia, R. Lin Peng, G.C. Chai, S. Johansson, and Y.D. Wang, Direct experimental mapping of microscale deformation heterogeneity in duplex stainless steel, Mater. Sci. Eng.: A 491 (2008), pp. 425–433.10.1016/j.msea.2008.02.021
   Web of Science ®Google Scholar
• M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe, Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD, Mater. Sci. Eng.: A 527 (2010), pp. 2738–2746.10.1016/j.msea.2010.01.004
   Web of Science ®Google Scholar
• C. Herrera, D. Ponge, and D. Raabe, Recrystallization during annealing of a cold rolled lean duplex stainless steel, Mater. Sci. Forum 715–716 (2012), pp. 550–550.10.4028/www.scientific.net/MSF.715-716
   Google Scholar
• C. Herrera, D. Ponge, and D. Raabe, Design of a novel Mn-based 1GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability, Acta Mater. 59 (2011), pp. 4653–4664.10.1016/j.actamat.2011.04.011
   Web of Science ®Google Scholar
• S. Suwas and R.K. Ray, Crystallographic Texture of Materials, Springer, London, 2014.10.1007/978-1-4471-6314-5
   Google Scholar
• B. Verlinden, J. Driver, I. Samajdar, and R. Doherty, Thermo-mechanical Processing of Metallic Materials, Vol. 11, Elsevier, Oxford, 2007.
   Google Scholar
• A. Ferreira Filho, C. Herrera, N.B. de Lima, R.L. Plaut, and A.F. Padilha, Texture evolution of ferritic (AISI 430) stainless steel strips during cold rolling, annealing and drawing, Mater. Sci. Forum 539–543 (2007), pp. 4926–4931.10.4028/www.scientific.net/MSF.539-543
   Google Scholar
• M. Hölscher, D. Raabe, and K. Lücke, Rolling and recrystallization textures of BCC steels, Textures Microstruct. 14 (1991), pp. 585–596.
   Google Scholar
• L.S. Tóth, J.J. Jonas, D. Daniel, and R.K. Ray, Development of ferrite rolling textures in low- and extra low-carbon steels, Metall. Trans. A 21 (1990), pp. 2985–3000.10.1007/BF02647219
   Web of Science ®Google Scholar
• R. Khatirkar, K.V.M. Krishna, L. Kestens, R. Petrov, P. Pant, and I. Samajdar, Strain localizations in ultra low carbon steel: exploring the role of dislocations, ISIJ Int. 51 (2011), pp. 849–856.10.2355/isijinternational.51.849
   Web of Science ®Google Scholar
• R. Khatirkar, L. Kestens, R. Petrov, and I. Samajdar, Controlled warm working: possible tool for optimizing stored energy advantage in deformed γ-fiber (ND// 〈1 1 1〉), ISIJ Int. 49 (2009), pp. 78–85.10.2355/isijinternational.49.78
   Web of Science ®Google Scholar
• D. Raabe, Contribution of {1 2 3} 〈1 1 1〉 slip systems to deformation of B.C.C. metals, Phys. Status Solidi Appl. Res. 149 (1995), pp. 575–581.
   Google Scholar
• D. Raabe and K. Lücke, Textures of ferritic stainless steels, Mater. Sci. Technol. 9 (1993), pp. 302–312.10.1179/mst.1993.9.4.302
   Web of Science ®Google Scholar
• T. Leffers and R.K. Ray, The brass-type texture and its deviation from the copper-type texture, Prog. Mater. Sci. 54 (2009), pp. 351–396.10.1016/j.pmatsci.2008.09.002
   Web of Science ®Google Scholar
• R. Madhavan, R.K. Ray, and S. Suwas, Micro-mechanical aspects of texture evolution in nickel and nickel-cobalt alloys: Role of stacking fault energy, Philos. Mag. 96 (2016), pp. 1–23.
   Web of Science ®Google Scholar
• R.E. Smallman and D. Green, The dependence of rolling texture on stacking fault energy, Acta Metall. 12 (1964), pp. 145–154.10.1016/0001-6160(64)90182-8
   Google Scholar
• L. Rémy and A. Pineau, Twinning and strain-induced f.c.c. → h.c.p. transformation on the mechanical properties of CoNiCrMo alloys, Mater. Sci. Eng. 26 (1976), pp. 123–132.10.1016/0025-5416(76)90234-2
   Google Scholar
• G. Wassermann, Der einfluss mechanischer zwillingbildung auf die entstehung der walztexturen kubisch flächenzentrierter metalle [The effect of mechanical twinning on the formation of rolling textures in face-centered-cubic metals], Z. Met. 54 (1963), pp. 61–65.
   Google Scholar
• K. Wierzbanowski, M. Wroński, and T. Leffers, FCC rolling textures reviewed in the light of quantitative comparisons between simulated and experimental textures FCC rolling textures reviewed in the light of quantitative comparisons between simulation, Crit. Rev. Solid State Mater. Sci. 39 (2014), pp. 391–422.10.1080/10408436.2014.899485
   Web of Science ®Google Scholar
• J.G. Sevillano, The contribution of macroscopic shear bands to the rolling texture of fcc metals 11 (1977), pp. 581–585.
   Google Scholar
• B.J. Duggan, M. Hatherly, W.B. Hutchinson, and P.T. Wakefield, Deformation structures and textures in cold-rolled 70: 30 brass, Met. Sci. 12 (1978), pp. 343–351.
   Google Scholar
• W.B. Hutchinson, B.J. Duggan, and M. Hatherly, Development of deformation texture and microstructure in cold-rolled Cu-30Zn, Met. Technol. 6 (1979), pp. 398–403.
   Google Scholar
• S.R. Kalidindi, R.D. Doherty, and C. Necker, Deformation texture transition in brass: Critical role of micro-scale shear bands, Acta Mater. 48 (2000), pp. 2665–2673.
   Web of Science ®Google Scholar
• S.R. Kalidindi, Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals, Int. J. Plast. 17 (2001), pp. 837–860.10.1016/S0749-6419(00)00071-1
   Web of Science ®Google Scholar
• P. Van Houtte, S. Li, M. Seefeldt, and L. Delannay, Deformation texture prediction: From the Taylor model to the advanced Lamel model, Int. J. Plast. 21 (2005), pp. 589–624.10.1016/j.ijplas.2004.04.011
   Web of Science ®Google Scholar
• N. Jia, R. Lin Peng, Y.D. Wang, S. Johansson, and P.K. Liaw, Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling, Acta Mater. 56 (2008), pp. 782–793.10.1016/j.actamat.2007.10.040
   Web of Science ®Google Scholar
• P. Van Houtte, L. Delannay, and S.R. Kalidindi, Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction, Int. J. Plast. 18 (2002), pp. 359–377.10.1016/S0749-6419(00)00102-9
   Web of Science ®Google Scholar
• D. Raabe, Texture simulation for hot rolling of aluminium by use of a Taylor model considering grain interactions, Acta Metall. Mater. 43 (1995), pp. 1023–1028.10.1016/0956-7151(94)00302-X
   Google Scholar
• B. Liu, D. Raabe, F. Roters, P. Eisenlohr, and R.A. Lebensohn, Comparison of finite element and fast Fourier transform crystal plasticity solvers for texture prediction, Model. Simul. Mater. Sci. Eng. 18 (2010), pp. 085005 (21).
   Google Scholar
• N. Jia, F. Roters, P. Eisenlohr, C. Kords, and D. Raabe, Non-crystallographic shear banding in crystal plasticity FEM simulations: Example of texture evolution in α-brass, Acta Mater. 60 (2012), pp. 1099–1115.10.1016/j.actamat.2011.10.047
   Web of Science ®Google Scholar
• L. Anand and C. Su, A theory for amorphous viscoplastic materials undergoing finite deformations, with application to metallic glasses, J. Mech. Phys. Solids 53 (2005), pp. 1362–1396.10.1016/j.jmps.2004.12.006
   Web of Science ®Google Scholar
• D. Raabe, Investigation of contribution of {1 2 3} slip planes to development of rolling textures in bee metals by use of Taylor models, Mater. Sci. Technol. 11 (1995), pp. 455–460.10.1179/mst.1995.11.5.455
   Web of Science ®Google Scholar
• L.S. Tóth, A. Molinari, D. Raabe, Modeling of rolling texture development in a ferritic chromium steel, Metall. Mater. Trans. A. 28 (1997), pp. 2343–2351.
   Google Scholar
• P. Eisenlohr, D.D. Tjahjanto, T. Hochrainer, F. Roters, and D. Raabe, Comparison of texture evolution in fcc metals predicted by various grain cluster homogenization schemes, Int. J. Mater. Res. 100 (2009), pp. 500–509.10.3139/146.110071
   Web of Science ®Google Scholar
• D. Raabe, Simulation of rolling textures of b.c.c. metals considering grain interactions and crystallographic slip on {1 1 0}, {1 1 2} and {1 2 3} planes, Mater. Sci. Eng.: A 197 (1995), pp. 31–37.10.1016/0921-5093(94)09770-4
   Web of Science ®Google Scholar
• D. Raabe, Z. Zhao, and W. Mao, On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction, Acta Mater. 50 (2002), pp. 4379–4394.10.1016/S1359-6454(02)00276-8
   Web of Science ®Google Scholar
• P. Van Houtte, L. Delannay, and I. Samajdar, Quantitative prediction of cold rolling textures in low-carbon steel by means of the lamel model 31 (1999), pp. 109–149.
   Google Scholar
• S.R. Kalidindi, C.A. Bronkhorst, and L. Anand, Crystallographic texture evolution in bulk deformation processing of FCC metals, J. Mech. Phys. Solids 40 (1992), pp. 537–569.10.1016/0022-5096(92)80003-9
   Web of Science ®Google Scholar
• N. Jia, P. Eisenlohr, F. Roters, D. Raabe, and X. Zhao, Orientation dependence of shear banding in face-centered-cubic single crystals, Acta Mater. 60 (2012), pp. 3415–3434.10.1016/j.actamat.2012.03.005
   Web of Science ®Google Scholar
• P. Van Houtte, Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning, Acta Metall. 26 (1978), pp. 591–604.10.1016/0001-6160(78)90111-6
   Google Scholar
• P. Van Houtte, On the equivalence of the relaxed Taylor theory and the Bishop-Hill theory for partially constrained plastic deformation of crystals, Mater. Sci. Eng. 55 (1982), pp. 69–77.10.1016/0025-5416(82)90085-4
   Google Scholar
• A. Molinari, G.R. Canova, and S. Ahzi, A self consistent approach of the large deformation 35 (1987), pp. 2983–2994.
   Google Scholar
• R.A. Lebensohn and C.N. Tomé, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys, Acta Metall. Mater. 41 (1993), pp. 2611–2624.10.1016/0956-7151(93)90130-K
   Google Scholar
• C. Tome, G.R. Canova, U.F. Kocks, N. Christodoulou, and J.J. Jonas, The relation between macroscopic and microscopic strain hardening in FCC polycrystals, Acta Metall. 32 (1984), pp. 1637–1653.10.1016/0001-6160(84)90222-0
   Google Scholar
• C.N. Tomé, R.A. Lebensohn, Manual for Code Version 7b, (2007).
   Google Scholar
• W. Vander Voort, Baldwin, Metallography and microstructures handbook, ASM Int. 9 (2004), pp. 1–2733.
   Google Scholar
• OIM Analysis version:7.2, User Man. TexSEM Lab. Inc., (2013).
   Google Scholar
• P. Van Houtte, The ‘MTM-FHM’ software system Version 2 Manual, (2009).
   Google Scholar
• H.-J. Bunge, Texture Analysis in Materials Science, Elsevier, (1982).
   Google Scholar
• N.P. Gurao and S. Suwas, Effect of phase contiguity and morphology on the evolution of deformation texture in two-phase alloys, Metall. Mater. Trans. A 48 (2017), pp. 809–827.10.1007/s11661-016-3856-1
   Web of Science ®Google Scholar
• J. Keichel, J. Foct, and G. Gottstein, Deformation and annealing behavior of nitrogen alloyed duplex stainless steels. Part I: Rolling, ISIJ Int. 43 (2003), pp. 1781–1787.
   Web of Science ®Google Scholar
• A.J. Schwartz, M. Kumar, A.L. Adams, and D.P. Field, Electron Backscatter Diffraction in Materials Science, 2nd ed., Plenum Publ, New York, NY, 2009.10.1007/978-0-387-88136-2
   Google Scholar
• D. Raabe, Inhomogeneity of the crystallographic texture in a hot-rolled austenitic stainless steel, J. Mater. Sci. 30 (1995), pp. 47–52.10.1007/BF00352130
   Web of Science ®Google Scholar
• I. Tikhovskiy, D. Raabe, and F. Roters, Simulation of earing of a 17% Cr stainless steel considering texture gradients, Mater. Sci. Eng.: A 488 (2008), pp. 482–490.10.1016/j.msea.2007.11.063
   Web of Science ®Google Scholar
• M.Y. Huh, J.H. Lee, S.H. Park, O. Engler, and D. Raabe, Effect of through-thickness macro and micro-texture gradients on ridging of 17%Cr ferritic stainless steel sheet, Steel Res. Int. 76 (2005), pp. 797–806.10.1002/srin.2005.76.issue-11
   Web of Science ®Google Scholar
• D. Raabe, Texture and microstructure evolution during cold rolling of a strip cast and of a hot rolled austenitic stainless steel, Acta Mater. 45 (1997), pp. 1137–1151.10.1016/S1359-6454(96)00222-4
   Web of Science ®Google Scholar
• C. Herrera, D. Ponge, and D. Raabe, Characterization of the microstructure, crystallographic texture and segregation of an as-cast duplex stainless steel slab, Steel Res. Int. 79 (2008), pp. 10–12.
   Web of Science ®Google Scholar
• S. Suwas, R. Arruffat-Massion, L.S. Tóth, A. Eberhardt, J.-J. Fundenberger, and W. Skrotzki, Evolution of crystallographic texture during equal channel angular extrusion of copper: The role of material variables procedure, Metall. Mater. Trans. A 37 (2006), pp. 739–753.10.1007/s11661-006-0046-6
   Web of Science ®Google Scholar
• J. Sidor, A. Miroux, R. Petrov, and L. Kestens, Microstructural and crystallographic aspects of conventional and asymmetric rolling processes, Acta Mater. 56 (2008), pp. 2495–2507.10.1016/j.actamat.2008.01.042
   Web of Science ®Google Scholar
• S. Pramanik, S. Bera, and S.K. Ghosh, Influence of cold rolling on microstructural evolution in 2205 duplex stainless steel, Steel Res. Int. 85 (2014), pp. 776–783.10.1002/srin.v85.5
   Web of Science ®Google Scholar
• M. Breda, K. Brunelli, F. Grazzi, A. Scherillo, and I. Calliari, Effects of cold rolling and strain-induced martensite formation in a SAF 2205 duplex stainless steel, Metall. Mater. Trans. A. 46 (2014), pp. 577–586.
   Web of Science ®Google Scholar
• P.C.J. Gallagher, The influence of alloying, temperature, and related effects on the stacking fault energy, Metall. Trans. 1 (1970), pp. 2429–2461.
   Web of Science ®Google Scholar
• W. Sigle, C. Sarbu, and D. Brunner, Direct measurements of stacking-fault energies from observations of dislocation nodes, Philos. Mag. 6(70) (1961), pp. 1215–1226.
   Web of Science ®Google Scholar
• F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004.
   Google Scholar
• R. Madhavan, R.K. Ray, and S. Suwas, New insights into the development of microstructure and deformation texture in nickel-60 wt.% cobalt alloy, Acta Mater. 78 (2014), pp. 222–235.10.1016/j.actamat.2014.06.031
   Web of Science ®Google Scholar
• R. Khatirkar, B. Vadavadagi, S.K. Shekhawat, and A. Haldar, Orientation Dependent Recovery in Interstitial Free Steel, ISIJ Int. 52 (2012), pp. 884–893.10.2355/isijinternational.52.884
   Web of Science ®Google Scholar
• N. Jia, R.L. Peng, Y.D. Wang, and X. Zhao, Self-consistent modeling of rolling textures in an austenitic–ferritic duplex steel, Mater. Sci.and Eng.: A 528 (2011), pp. 3615–3624.10.1016/j.msea.2011.01.027
   Web of Science ®Google Scholar
• N. Jia, D. Raabe, and X. Zhao, Texture and microstructure evolution during non-crystallographic shear banding in a plane strain compressed Cu–Ag metal matrix composite, Acta Mater. 76 (2014), pp. 238–251.10.1016/j.actamat.2014.05.036
   Web of Science ®Google Scholar