Discontinuous precipitation in a nickel-free high nitrogen austenitic stainless steel on solution nitriding

References

• M. Sumita, T. Hanawa, and S.H. Teoh, Development of nitrogen-containing nickel-free austenitic stainless steels for metallic biomaterials – Review, Mater. Sci. Eng. C 24 (2004), pp. 753–760.10.1016/j.msec.2004.08.030
   Web of Science ®Google Scholar
• L. Montanaro, M. Cervellati, and D. Campoccia, Promising in vitro performances of a new nickel-free stainless steel, J. Mater. Sci. Mater. Med. 17 (2006), pp. 267–275.10.1007/s10856-006-7313-3
   PubMed Web of Science ®Google Scholar
• J.A. Disegil and L. Eschbachz, Stainless steel in bone surgery, Injury 31 (2000), pp. D2–D6.10.1016/S0020-1383(00)80015-7
   Web of Science ®Google Scholar
• Y.N. Turan and A. Koursarist, Nitrogen-alloyed austenitic stainless steels and their properties, J. South. Afr. Inst. Min. Metall. 93 (1993), pp. 97–104.
   Google Scholar
• L. Reclaru, R. Ziegenhagen, P.Y. Eschler, A. Blatter, and J. Lemaître, Comparative corrosion study of “Ni-free” austenitic stainless steels in view of medical applications, Acta Biomater. 2 (2006), pp. 433–444.10.1016/j.actbio.2006.03.004
   PubMed Web of Science ®Google Scholar
• K. Yang and Y. Ren, Nickel-free austenitic stainless steels for medical applications, Sci. Technol. Adv. Mater. 11 (2010), pp. 1–13.
   Web of Science ®Google Scholar
• A.P. Tschiptschin, C.H. Aidar, F.B. Neto, and N. Alonso-Fallerios, Nitrogen bearing austenitic stainless steels for surgical implants, Mater. Sci. Forum 318–320 (1999), pp. 569–578.10.4028/www.scientific.net/MSF.318-320
   Google Scholar
• H. Berns and S. Siebert, High nitrogen austenitic cases in stainless steels, ISIJ Int. 36 (1996), pp. 927–931.10.2355/isijinternational.36.927
   Web of Science ®Google Scholar
• H. Berns, J.W. Bouwman, U. Eul, I. Izagirre, R.L. Juse, H.J. Niederau, G. Tavernier, and R. Zieschang, Solution nitriding of stainless steels for process engineering, Mat.-wiss. u. Werkstofftech 31 (2000), pp. 152–161.
   Web of Science ®Google Scholar
• H. Berns, B. Edenhofer, and R. Zaugg, Industrial experience with case hardening of stainless steels by solution nitriding, Trans. Mater. Heat. Treat. 25 (2004), pp. 354–359.
   Google Scholar
• H. Berns and A. Kühl, Reduction in wear of sewage pump through solution nitriding, Wear 256 (2004), pp. 16–20.10.1016/S0043-1648(03)00218-7
   Web of Science ®Google Scholar
• J.W. Simmons, Overview: High-nitrogen alloying of stainless steels, Mater. Sci. Eng. A 207 (1996), pp. 159–169.10.1016/0921-5093(95)09991-3
   Web of Science ®Google Scholar
• J.C. Rawers, J.S. Dunning, G. Asai, and R.P. Reed, Characterization of stainless steels melted under high nitrogen pressure, Metall. Trans. A 23 (1992), pp. 2061–2068.10.1007/BF02647552
   Web of Science ®Google Scholar
• G. Balachandran, M.L. Bhatia, N.B. Ballal, and P. Rao, Some theoretical aspects on designing nickel free high nitrogen austenitic stainless steels, ISIJ Int. 41 (2001), pp. 1018–1027.10.2355/isijinternational.41.1018
   Web of Science ®Google Scholar
• P.A. Carvalho, I.F. Machado, G. Solórzano, and A.F. Padilha, On Cr2N precipitation mechanisms in high-nitrogen austenite, Philos. Mag. 88 (2008), pp. 229–242.10.1080/14786430701805590
   Web of Science ®Google Scholar
• R.D. Knutsen, C.I. Lang, and J.A. Basson, Discontinuous cellular precipitation in a Cr–Mn–N steel with niobium and vanadium additions, Acta Mater. 52 (2004), pp. 2407–2417.10.1016/j.actamat.2004.01.031
   Web of Science ®Google Scholar
• L. Rovatti, R. Montanari, N. Ucciardello, A. Mezzi, S. Kaciulis, and A. Carosi, Discontinuous precipitation in a high-nitrogen austenitic steel, Mater. Sci. Forum 638–642 (2010), pp. 3597–3602.10.4028/www.scientific.net/MSF.638-642
   Google Scholar
• S. Feng, W. Li-jun, C. Wen-fang, and L. Chun-ming, Precipitation kinetics of Cr2N in high nitrogen austenitic stainless steel, J. Iron Steel Res. Int. 15 (2008), pp. 72–77.
   Web of Science ®Google Scholar
• B. Mortimer, P. Grieveson, and K.H. Jack, Precipitation of nitrides in ferritic Fe alloys containing Cr, Scand. J. Metall. 1 (1972), pp. 203–209.
   Google Scholar
• P.M. Hekker, H.C.F. Rozendaal, and E.J. Mittemeijer, Excess nitrogen and discontinuous precipitation in nitrided iron-chromium alloys, J. Mater. Sci. 20 (1985), pp. 718–729.10.1007/BF01026547
   Web of Science ®Google Scholar
• R.E. Schacherl, P.C.J. Graat, and E.J. Mittemeijer, Gaseous nitriding of iron-chromium alloys, Z. Metallkd. 93 (2002), pp. 468–477.10.3139/146.020468
   Google Scholar
• M. Sennour, P.H. Jouneau, and C. Esnouf, TEM and EBSD investigation of continuous and discontinuous precipitation of CrN in nitrided pure Fe-Cr alloys, J. Mater. Sci. 39 (2004), pp. 4521–4531.10.1023/B:JMSC.0000034146.64444.80
   Web of Science ®Google Scholar
• G. Miyamoto, A. Yonemoto, Y. Tanaka, T. Furuhara, and T. Maki, Microstructure in a plasma-nitrided Fe–18 mass% Cr alloy, Acta Mater. 54 (2006), pp. 4771–4779.10.1016/j.actamat.2006.06.006
   Web of Science ®Google Scholar
• G. Miyamoto, Y. Tomio, H. Aota, K. Oh-ishi, K. Hono, and T. Furuhara, Precipitation of nanosized nitrides in plasma nitrided Fe–M (M=Al, Cr, Ti, V) alloys, Mater. Sci. Technol. 27 (2011), pp. 742–746.10.1179/1743284710Y.0000000014
   Web of Science ®Google Scholar
• R.G. Baker and J. Nutting, Precipitation processes in steels, Iron Steel Inst. Spec. Rep. 64 (1959), pp. 1–22.
   Google Scholar
• E.J. Mittemeijer, A.B.P. Vogels, and P.J. Van Der Schaaf, Morphology and lattice distortions of nitrided iron and iron-chromium alloys and steels, J. Mater. Sci. 15 (1980), pp. 3129–3140.10.1007/BF00550386
   Web of Science ®Google Scholar
• P.C. Van Wiggen, H.C.F. Rozendaal, and E.J. Mittemeijer, The nitriding behavior of iron-chromium-carbon alloys, J. Mater. Sci. 20 (1985), pp. 4561–4582.10.1007/BF00559347
   Web of Science ®Google Scholar
• T. Tsuchiyama, H. Ito, K. Kataoka, and S. Takaki, Fabrication of ultrahigh nitrogen austenitic steels by nitrogen gas absorption into solid solution, Metall. Mater. Trans. A 34 (2003), pp. 2591–2599.10.1007/s11661-003-0018-z
   Web of Science ®Google Scholar
• D. Kuroda, T. Hanawa, T. Hibaru, S. Kuroda, M. Kobayashi, and T. Kobayashi, New manufacturing process of nickel-free austenitic stainless steel with nitrogen absorption treatment, Mater. Trans. 44 (2003), pp. 414–420.10.2320/matertrans.44.414
   Web of Science ®Google Scholar
• T. Tscuchiyama, H. Uchida, K. Katako, and S. Takaki, Fabrication of fine-grained high nitrogen austenitic steels through mechanical alloying treatment, ISIJ Int. 42 (2002), pp. 1438–1443.10.2355/isijinternational.42.1438
   Web of Science ®Google Scholar
• H. Mitsui and S. Kurihana, Solution nitriding treatment of Fe-Cr alloys under pressurized nitrogen gas, ISIJ Int. 47 (2007), pp. 479–485.10.2355/isijinternational.47.479
   Web of Science ®Google Scholar
• R. Mohammadzadeh and A. Akbari, Effect of pressurized solution nitriding on phase changes and mechanical properties of ferritic Fe–22.7 Cr–2.4 Mo stainless steel, Mater. Sci. Eng. A 592 (2014), pp. 153–163.10.1016/j.msea.2013.10.103
   Web of Science ®Google Scholar
• Thermo-Calc software AB, Stockholm, Sweden, 2000; software available at https://www.thermocalc.com
   Google Scholar
• H. Selg, E. Bischoff, I. Bernstein, T. Woehrle, S.R. Meka, R.E. Schacherl, T. Waldenmaier, and E.J. Mittemeijer, Defect-dependent nitride surface layer development upon nitriding of Fe–1 at.% Mo alloy, Philos. Mag. 93 (2013), pp. 2133–2160.10.1080/14786435.2013.765983
   Web of Science ®Google Scholar
• T. Steiner, M. Akhlaghi, S.R. Meka, and E.J. Mittemeijer, Diffraction-line shifts and broadenings in continuously and discontinuously coarsening precipitate-matrix systems: Coarsening of initially coherent nitride precipitates in a ferrite matrix, J. Mater. Sci. 50 (2015), pp. 7075–7086.10.1007/s10853-015-9262-z
   Web of Science ®Google Scholar
• A. Martinavičius, G. Abrasonis, W. Möller, C. Templier, J.P. Rivière, A. Declémy, and Y. Chumlyakov, Anisotropic ion-enhanced diffusion during ion nitriding of single crystalline austenitic stainless steel, J. Appl. Phys. 105 (2009), pp. 1–7.
   Web of Science ®Google Scholar
• R. Mohammadzadeh, A. Akbari, and M. Mohammadzadeh, Impact toughness properties of nickel-and manganese-free high nitrogen austenitic stainless steels, Metall. Mater. Trans. A 47 (2016), pp. 6032–6041.10.1007/s11661-016-3742-x
   Web of Science ®Google Scholar
• D.B. Wiles and R.A. Young, A new computer program for Rietveld analysis of X-ray powder diffraction patterns, J. Appl. Crystallogr. 14 (1981), pp. 149–151.10.1107/S0021889881008996
   Web of Science ®Google Scholar
• W.B. Pearson, A Handbook of Lattice Spacings and Structures of Metals and Alloys. Vol. 4. International Series of Monographs on Metal Physics and Physical Metallurgy, Elsevier, Belfast, 2013.
   Google Scholar
• A.J. Ramirez, J.C. Lippold, and S.D. Brandi, The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels, Metall. Mater. Trans. A 34 (2003), pp. 1575–1597.10.1007/s11661-003-0304-9
   Web of Science ®Google Scholar
• W.F. Smith, Structure and Properties of Engineering Alloys, 2nd ed., McGraw-Hill Inc, New York, NY, 1993.
   Google Scholar
• D.A. Porter and K.E. Easterling, Phase Transformations in Metals and Alloys, 2nd ed., Chapman & Hall, London, 1992.10.1007/978-1-4899-3051-4
   Google Scholar
• F. Vanderschaeve, R. Taillard, and J. Foct, Discontinuous precipitation of Cr2N in a high nitrogen, chromium-manganese austenitic stainless steel, J. Mater. Sci. 30 (1995), pp. 6035–6046.10.1007/BF01151525
   Web of Science ®Google Scholar