Surface tension modelling of liquid Cd–Sn–Zn alloys

References

• H.J. Bray, The constitution of cadmium-tin-zinc alloys, J. Inst. Metals 87 (1958–59) 49–54.
   Google Scholar
• Y. Li and H. Dai, Recent advances in zinc–air batteries, Chem. Soc. Rev. 43 (2014), pp. 5257–5275.10.1039/C4CS00015C
   PubMed Web of Science ®Google Scholar
• J.-S. Lee, S. Tai Kim, R. Cao, N.-S. Choi, M. Liu, K.T. Lee, J. Cho, Metal-air batteries with high energy density: Li-air versus Zn-air, Adv. Energy Mater. 1 (2011), pp. 34–50.
   Web of Science ®Google Scholar
• K. Suganuma and K.-S. Kim, Sn–Zn low temperature solder, J. Mater. Sci-Mater. El. 18 (2007), pp. 121–127.
   Web of Science ®Google Scholar
• M. Ari, B. Saatçi, M. Gündüz, F. Meydaneri, and M. Bozoklu, Microstructure and thermo-electrical transport properties of Cd–Sn alloys, Mater. Charact. 59 (2008), pp. 624–630.10.1016/j.matchar.2007.05.014
   Web of Science ®Google Scholar
• International Cadmium Association. 2017. Available at http://www.cadmium.org (accessed 28 July 2017).
   Google Scholar
• M. Arici, H. Nazir, M. Aksu, Investigation of Sn–Zn electrodeposition from acidic bath on EQCM, J. Alloy Compd. 509 (2011) 1534–1537.10.1016/j.jallcom.2010.10.161
   Web of Science ®Google Scholar
• M.C. Record, V. Izard, M. Bulanova, and J.C. Tedenac, Phase transformations in the Zn–Cd–Sb system, Intermetallics 11 (2003), pp. 1189–1194.10.1016/S0966-9795(03)00157-2
   Web of Science ®Google Scholar
• M.J. Rizvi, Y.C. Chan, C. Bailey, H. Lu, M.N. Islam, and B.Y. Wu, Wetting and reaction of Sn–2.8Ag–0.5Cu–1.0Bi solder with Cu and Ni substrates, J. Electron. Mater. 34 (2005), pp. 1115–1122.10.1007/s11664-005-0239-6
   Web of Science ®Google Scholar
• N. Eustathopoulos, M. Nicholas, B. Drevet, Wettability at High Temperatures, Pergamon Press, Oxford, 1999.
   Google Scholar
• I. Egry, E. Ricci, R. Novakovic, and S. Ozawa, Surface tension of liquid metals and alloys – Recent developments, Adv. Colloid Interface Sci. 159 (2010), pp. 198–212.10.1016/j.cis.2010.06.009
   PubMed Web of Science ®Google Scholar
• R. Nowak, T. Lanata, N. Sobczak, E. Ricci, D. Giuranno, R. Novakovic, D. Holland-Moritz, and I. Egry, Surface tension of c-TiAl-based alloys, J. Mater. Sci. 45 (2010), pp. 1993–2001.10.1007/s10853-009-4061-z
   Web of Science ®Google Scholar
• Yu. Plevachuk, V. Sklyarchuk, G. Gerbeth, S. Eckert, and R. Novakovic, Surface tension and density of liquid Bi–Pb, Bi–Sn and Bi–Pb–Sn eutectic alloys, Surf. Sci. 605 (2011), pp. 1034–1042.10.1016/j.susc.2011.02.026
   Web of Science ®Google Scholar
• M. Kucharski and M. Gluzinska, Surface tension of multicomponent solutions, Arch. Techn. Maszyn I Automatyzacji 21 (2001), pp. 123–130. (in polish).
   Google Scholar
• M. Kucharski and M. Gluzinska, Surface tension of liquid Cd–Zn–Sn alloys, Arch. Metall. 46 (2001), pp. 155–167.
   Google Scholar
• W. Ptak and M. Kucharski, Surface tension of Zn–Cd and Cd–Bi alloys, Arch. Hutn. 19 (1974), pp. 301–317.
   Google Scholar
• M. Kucharski, Density and surface tension of Sn–Zn alloys, Zesz. Nauk AGH Metalurgia Odlewnictwo 3 (1977), pp. 329–345. (in polish).
   Google Scholar
• M. Kucharski, Density and surface tension of Sn–Cd alloys, Arch. Hutn. 22 (1977), pp. 181–194.
   Google Scholar
• J. Pstrus, Z. Moser, W. Gasior, and A. Debski, Surface tension and density measurements of liquid Sn–Zn alloys. Experiment vs. Surdat database of Pb-free solders, Arch. Metall. Mater. 51 (2006), pp. 335–343.
   Web of Science ®Google Scholar
• J.A.V. Butler, The Thermodynamics of the Surfaces of Solutions, Proc. R. Soc. A: Math. Phys. Eng. Sci 135 (1932), pp. 348–375.10.1098/rspa.1932.0040
   Google Scholar
• T. Iida and R.I.L. Guthrie, The Physical Properties of Liquid Metals, 1st ed., Clarendon Press, Oxford, 1993.
   Google Scholar
• T. Tanaka, K. Hack, T. Iida, and S. Hara, Application of thermodynamic databases to the evaluation of surface tensions of molten alloys, salt mixtures and oxide mixtures, Z. Metallkd. 87 (1996), pp. 380–389.
   Google Scholar
• G. Siwiec, M. Kucharski, and J. Botor, Modeling and experimental measurements of the surface tensions of Cu–Pb–Fe alloys, Arch. Metall. Mater. 54 (2009), pp. 1167–1172.
   Web of Science ®Google Scholar
• J. Willner, G. Siwiec, and J. Botor, The surface tension of liquid Cu–Fe–Sb alloys, Appl. Surf. Sci. 256 (2010), pp. 2939–2943.10.1016/j.apsusc.2009.11.054
   Web of Science ®Google Scholar
• P. Fima and M. Kucharski, The surface tension and density of Ag–Bi–Sn alloys, Int. J. Mat. Res. 99 (2008), pp. 159–161.10.3139/146.101619
   Web of Science ®Google Scholar
• C. Costa, S. Delsante, G. Borzone, D. Zivkovic, and R. Novakovic, Thermodynamic and surface properties of liquid Co–Cr–Ni alloys, J. Chem. Thermodyn. 69 (2014), pp. 73–84.10.1016/j.jct.2013.09.034
   Web of Science ®Google Scholar
• M. Kucharski and C. Acuna, Thermodynamic properties of multi-component solutions, Arch. Metall. 41 (3) (1996), pp. 271–281.
   Google Scholar
• G.W. Toop, Predicting ternary activities using binary data, Trans. AIME 233 (1965), pp. 850–855.
   Google Scholar
• L. Yan, S. Zheng, G. Ding, G. Xu, and Z. Qiao, Surface tension calculation of the Sn–Ga–In ternary alloy, Calphad 31 (2007), pp. 112–119.10.1016/j.calphad.2006.09.005
   Web of Science ®Google Scholar
• K.C. Chou, A general solution model for predicting ternary thermodynamic properties, Calphad 19 (1995), pp. 315–325.10.1016/0364-5916(95)00029-E
   Web of Science ®Google Scholar
• O. Redlich and A.T. Kister, Algebraic representation of thermodynamic properties and the classification of solutions, Ind. Eng. Chem. 40 (1948), pp. 345–348.10.1021/ie50458a036
   Web of Science ®Google Scholar
• W.L. Falke, A.E. Schwaneke, and R.W. Nash, Surface tension of zinc: The positive temperature coefficient, Metal. Trans. B 8 (1977), pp. 301–303.10.1007/BF02657660
   Google Scholar
• D.W.G. White, The surface tension of zinc, Trans. Metal. Soc. AIME 236 (1966), pp. 796–803.
   Google Scholar
• D.W.G. White, The surface tensions of indium and cadmium, Metal. Trans. 3 (1972), pp. 1933–1936.10.1007/BF02642581
   Web of Science ®Google Scholar
• W. Ptak and M. Kucharski, Densities of the liquid Zn–Cd and Cd–Bi alloys, Arch. Hutn. 19 (1974), pp. 71–86.
   Google Scholar
• C.B. Alcock, V.P. Itkin, and M.K. Horrigan, Vapour pressure equations for the metallic elements: 298–2500 K, Can. Metall. Q. 23 (1984), pp. 309–313.10.1179/cmq.1984.23.3.309
   Web of Science ®Google Scholar
• K. Nogi, K. Ogino, A. McLean, and W.A. Miller, The temperature coefficient of the surface tension of pure liquid metals, Metall. Trans. B 17 (1986), pp. 163–170.10.1007/BF02670829
   Google Scholar
• K.C. Mills and Y.C. Su, Review of surface tension data for metallic elements and alloys: Part 1 – Pure metals, Int. Mater. Rev. 51 (2006), pp. 329–351.
   Web of Science ®Google Scholar
• J. Dutkiewicz, L. Zabdyr, Z. Moser, and J. Salawa, The Cd–Sn (Cadmium–Tin) system, Bull. Alloy Phase Diag. 10 (1989), pp. 223–229.10.1007/BF02877499
   Google Scholar
• B.J. Lee, Thermodynamic assessments of the Sn–Zn and In–Zn binary systems, Calphad 20 (1996), pp. 471–480.10.1016/S0364-5916(97)00009-6
   Web of Science ®Google Scholar
• S. Min, W.G. Jung, and J. Lee, Thermodynamic reassessment of the Cd–Zn system, Met. Mater. Int. 13 (2007), pp. 421–425.10.1007/BF03027879
   Web of Science ®Google Scholar