Temperature distribution and its influence on microstructure of Mg–3Sn–1Mn alloy during rheo-rolling process

References

• X. Fang, D. Yi, and B. Wang, Hot compression deformation behavior of the Mg-Al-Y-Zn magnesium alloy, Rare Met. 27 (2008), pp. 121–126. doi: 10.1016/S1001-0521(08)60099-6
   Web of Science ®Google Scholar
• J. Yang, J. Peng, M. Li, E.A. Nyberg, and F.S. Pan, Effects of Ca addition on the mechanical properties and corrosion behavior of ZM21 wrought alloys, Acta Metall. Sin. (Engl. Lett.). 30 (2017), pp. 53–65. doi: 10.1007/s40195-016-0492-0
   Web of Science ®Google Scholar
• I.V. Plisetskaya and A.V. Koltygin, Influence of small additives of calcium on the structure and properties of ML5 alloy (AZ91), Russ. J. Non-Ferr. Met. 57 (2016), pp. 436–444. doi: 10.3103/S1067821216050138
   Web of Science ®Google Scholar
• D. Wan, G. Yang, and S. Chen, Growth morphology and evolution of quasicrystal in as-solidified Y-rich Mg-Zn-Y ternary alloys, Rare Met. 26 (2007), pp. 435–439. doi: 10.1016/S1001-0521(07)60241-1
   Web of Science ®Google Scholar
• Q.S. Dong, Z.X. Ba, and Z.Z. Wang, Cerium-based sealing treatment of Mg-Al hydrotalcite film on AZ91D magnesium alloy, Acta Metall. Sin. (Engl. Lett.). 29 (2016), pp. 993–1000. doi: 10.1007/s40195-016-0448-4
   Web of Science ®Google Scholar
• J. Mao, H.S. Kim, and J. Shuai, Thermoelectric properties of materials near the band crossing line in Mg 2 Sn–Mg 2 Ge–Mg 2 Si system, Acta Mater. 103 (2016), pp. 633–642. doi: 10.1016/j.actamat.2015.11.006
   Web of Science ®Google Scholar
• Z.Y. Zhao, R.G. Guan, J.H. Zhang, Z.Y. Zhao, and P.K. Bai, Effects of process parameters of semisolid stirring on microstructure of Mg–3Sn–1Mn–3SiC (wt%) strip processed by rheo-rolling, Acta Metall. Sin. (Engl. Lett.). 30 (2017), pp. 66–72. doi: 10.1007/s40195-016-0509-8
   Web of Science ®Google Scholar
• H. Liu, Y. Chen, Y. Tang, and S. Wei, Tensile and indentation creep behavior of Mg–5% Sn and Mg–5% Sn–2% Di alloys, Mater. Sci. Eng. A. 464 (2007), pp. 124–128. doi: 10.1016/j.msea.2007.02.061
   Web of Science ®Google Scholar
• G. Nayyeri and R. Mahmudi, Enhanced creep properties of a cast Mg–5Sn alloy subjected to aging-treatment, Mater. Sci. Eng. A 527 (2010), pp. 4613–4618. doi: 10.1016/j.msea.2010.04.015
   Web of Science ®Google Scholar
• S. Wei, Y. Chen, and Y. Tang, Compressive creep behavior of Mg–Sn–La alloys, Mater. Sci. Eng. A 508 (2009), pp. 59–63. doi: 10.1016/j.msea.2008.12.049
   Web of Science ®Google Scholar
• Z.Z. Shi, The crystallography of lath-shaped Mg2Sn precipitates in a Mg–Sn–Zn–Mn alloy, J. Alloys Compd. 559 (2013), pp. 158–161. doi: 10.1016/j.jallcom.2013.01.109
   Web of Science ®Google Scholar
• M. Yang, C. Qin, and, F. Pan, Comparison of effects of cerium, yttrium and gadolinium additions on as-cast microstructure and mechanical properties of Mg-3Sn-1Mn magnesium alloy, J. Rare Earth 29 (2011), pp. 550–557. doi: 10.1016/S1002-0721(10)60496-6
   Web of Science ®Google Scholar
• S.J. Luo, W.C. Keung, and Y.L. Kang, Theory and application research development of semi—solid forming in China, Trans. Nonferrous Met. Soc. China 20 (2010), pp. 1805–1814. doi: 10.1016/S1003-6326(09)60378-2
   Web of Science ®Google Scholar
• R.G. Guan, Z.Y. Zhao, and, R.Z. Chao, Microstructure evolution and solidification behaviors of A2017 alloy during cooling/stirring and rolling process, Trans. Nonferrous Met. Soc. China 22 (2012), pp. 2871–2876. doi: 10.1016/S1003-6326(11)61544-6
   Web of Science ®Google Scholar
• T. Haga, H. Inui, and H. Watari, Casting of Al–Si hypereutectic aluminum alloy strip using an unequal diameter twin roll caster, J. Mater. Process. Technol. 191 (2007), pp. 238–241. doi: 10.1016/j.jmatprotec.2007.03.012
   Web of Science ®Google Scholar
• H. Watari, N. Koga, and K. Davey, Warm deep drawing of wrought magnesium alloy sheets produced by semi-solid roll strip-casting process, Int. J. Mach. Tools Manuf. 46 (2006), pp. 1233–1237. doi: 10.1016/j.ijmachtools.2006.01.018
   Web of Science ®Google Scholar
• S.B. Kang, J. Cho, and L. Chang, Influence of twin roll casting and differential speed rolling on microstructure and tensile properties in magnesium alloy sheets, Procedia Eng. 10 (2011), pp. 1190–1195. doi: 10.1016/j.proeng.2011.04.198
   Google Scholar
• R.G. Guan, Z.Y. Zhao, and Q.S. Zhang, Effect of the casting temperature on temperature field and microstructure of A2017 alloy during an innovative continuous semisolid rolling process with a vibrating sloping plate device, Int. J. Adv. Manuf. Technol. 67 (2013), pp. 917–923. doi: 10.1007/s00170-012-4536-y
   Web of Science ®Google Scholar
• B.E. Launder and D.B. Spalding, The numerical computation of turbulent flows, Comput. Methods Appl. Mech. 3 (1974), pp. 269–289. doi: 10.1016/0045-7825(74)90029-2
   Google Scholar
• R.G. Guan, Z.Y. Zhao, and H.Q. Huang, Theoretical study on boundary distributions and flow-metal heat transfer during melt treatment by cooling sloping plate, Acta Phys. Sin. Ch. Ed. 61 (2012), pp. 1–9.
   Web of Science ®Google Scholar