References
- R.R. Boyer, Titanium for aerospace: Rationale and applications, Adv. Perform. Mater. 2(4) (1995), pp. 349–368. doi: 10.1007/BF00705316
- B. Oberwinkler, M. Riedler, and W. Eichlseder, Importance of local microstructure for damage tolerant light weight design of Ti–6Al–4V forgings, Int J Fatigue 32 (2010), pp. 808–814.
- C. Leyens, M. Peters, Titanium and Titanium Alloys: Fundamentals and Applications, Wiley-VCH, Weinheim, 2003.
- N. Stefansson, S.L. Semiatin, and D. Eylon, The kinetics of static globularization of Ti-6Al-4V, Metall. Mater. Trans. A 33 (2002) pp. 3527–3534. doi: 10.1007/s11661-002-0340-x
- N. Stefansson and S.L. Semiatin, Mechanisms of globularization of Ti-6Al-4 V during static heat treatment, Metall. Mater. Trans. A 34 (2003), pp. 691–698. doi: 10.1007/s11661-003-0103-3
- S.L. Semiatin, S.L. Knisley, P.N. Fagin, F. Zhang, and D.R. Barker, Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V, Metall. Mater. Trans. A 34 (2003), pp. 2377–2386. doi: 10.1007/s11661-003-0300-0
- I. Weiss, F. Froes, D. Eylon, and G. Welsch, Modification of a morphology in Ti-6Al-4 V by thermomechanical processing, Metall. Mater. Trans. A 17 (1986), pp. 1935–1947. doi: 10.1007/BF02644991
- S. Mironov, M. Murzinova, S. Zherebtsov, G.A. Salishchev, and S.L. Semiatin, Microstructure evolution during warm working of Ti-6Al-4 V with a colony a microstructure, Acta Mater. 57 (2009), pp. 2470–2481. doi: 10.1016/j.actamat.2009.02.016
- A.A. Salem, M.G. Glavicic, and S.L. Semiatin, A coupled EBSD/EDS method to determine the primary- and secondary-alpha textures in titanium alloys with duplex microstructures, Mater. Sci. Eng. A 494 (2008), pp. 350–359. doi: 10.1016/j.msea.2008.06.022
- D. Banerjee and J.C. Williams, Perspectives on titanium science and technology, Acta Mater. 61 (2013), pp. 844–879. doi: 10.1016/j.actamat.2012.10.043
- G. Lütjering, Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys, Mater. Sci. Eng. A 243 (1998), pp. 32–45. doi: 10.1016/S0921-5093(97)00778-8
- G. Lütjering, Property optimization through microstructural control in titanium and aluminum alloys, Mater. Sci. Eng. A 263 (1999), pp. 117–126. doi: 10.1016/S0921-5093(98)01169-1
- M. Peters and G. Lüetjering, Control of microstructure and texture in Ti-6Al-4V, in Titanium 80: Science and Technology, H. Kimura, ed., Metallurgical Society of AIME, Kyoto, New York, 1980, vol. 2, pp. 925–e935.
- K. Mallikarjun, S. Suwas, and S. Bhargava, Effect of prior b processing on superplasticity of (α+β) thermo-mechanically treated Ti-632Si alloy, J. Mater. Process. Technol. 134 (2003), pp. 35–44. doi: 10.1016/S0924-0136(02)00916-0
- M.R. Bache, A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions, Int J Fatigue 25 (2003), pp. 1079–1087. doi: 10.1016/S0142-1123(03)00145-2
- S.L. Semiatin, B.C. Kirby, G.A. Salishchev, Coarsening behavior of an alpha-beta titanium alloy, Metall. Mater. Trans. A 35 (2004), pp. 2809–2819. doi: 10.1007/s11661-004-0228-z
- S.L. Semiatin, M.W. Corbett, P.N. Fagin, G.A. Salishchev, C.S. Lee, Dynamiccoarsening behavior of an a/b titanium alloy, Metall. Mater. Trans. A 37 (2006), pp. 1125–1136. doi: 10.1007/s11661-006-1091-x
- J.L.W. Warwick, N.G. Jones, I. Bantounas, M. Preuss, and D. Dye, In situ observation of texture and microstructure evolution during rolling and globularization of Ti-6Al-4 V, Acta Mater. 61 (2013), pp. 1603–1615. doi: 10.1016/j.actamat.2012.11.037
- S. Semiatin, V. Seetharaman, and I. Weiss, The thermomechanical processing of alpha/beta titanium alloys, J. Miner. Metals Mater. Soc. 49 (1997), pp. 33–39. doi: 10.1007/BF02914711
- S. Zherebtsov, M. Murzinova, G. Salishchev, and S.L. Semiatin, Spheroidization of the lamellar microstructure in Ti-6Al-4V alloy during warm deformation and annealing, Acta Mater. 59 (2011), pp. 4138–4150. doi: 10.1016/j.actamat.2011.03.037
- L. Yang and Y. Yang, Deformed microstructure and texture of Ti6Al4V alloy, Trans. Nonferrous Met. Soc. China 24 (2014), pp. 3103–3110. doi: 10.1016/S1003-6326(14)63448-8
- J. Song, K. Hong, T.K. Ha, and H.T. Jeong, The effect of hot rolling condition on the anisotropy of mechanical properties in Ti–6Al–4 V alloy, Mater. Sci. Eng. A 449–451 (2007), pp. 144–148.
- D. G. Leo Prakash, R. Ding, R. J. Moat, I. Jones, P. J. Withers, J. Quinta da Fonseca, and M. Preuss, Deformation twinning in Ti-6Al-4 V during low strain rate deformation to moderate strains at room temperature, Mater. Sci. Eng. A 527 (2010), pp. 5734–5744. doi: 10.1016/j.msea.2010.05.039
- D.G. Leo Prakash, P. Honniball, D. Rugg, P.J. Withers, J. Quinta da Fonseca, and M. Preuss, The effect of β phase on microstructure and texture evolution during thermo mechanical processing of α+β Ti alloy, Acta Mater. 61 (9) (2013), pp. 3200–3213. doi: 10.1016/j.actamat.2013.02.008
- K. Pawlik and P. Ozga, Labotex: The texture analysis software, Göttinger Arbeiten zur Geologie und Paläontologie, SB4, 1999.
- B.D. Bishoyi, R.K. Sabat, and S.K. Sahoo, Effect of temperature on microstructure and texture evolutions during uniaxial compression of commercially pure titanium, Mater. Sci. Eng. A 718 (2018), pp. 398–411. doi: 10.1016/j.msea.2018.01.128
- R.K. Sabat, D. Panda, and S.K. Sahoo, Growth mechanism of extension twin variants during annealing of pure magnesium: An ‘ex situ’ electron backscattered diffraction investigation, Mater. Charact. 126 (2017), pp. 10–16.
- R.K. Sabat, P.K. Samal, and S. Muzzamil Ahamed, Effect of strain path on the evolution of microstructure, texture and tensile properties of WE43 alloy, Mater. Sci. Eng. A 715 (2018), pp. 348–358.
- B.D. Bishoyi, R.K. Sabat, J. Sahu, and S.K. Sahoo, Effect of temperature on microstructure and texture evolution during uniaxial tension of commercially pure titanium, Mater. Sci. Eng. A. 703 (2017), pp. 399–412.
- M. Knezevic, A. Levinson, R. Harris, R.K. Mishra, R.D. Doherty and S. Kalidindi, Deformation twinning in AZ31: influence on strain hardening and texture evolution, Acta Mater. 58 (2010), pp. 6230–6242. doi: 10.1016/j.actamat.2010.07.041
- R.A. Lebensohn, C.N. Tomé, A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys. Acta Metall. Mater. 41 (1993), pp. 2611–2624 doi: 10.1016/0956-7151(93)90130-K
- S. Suwas, B. Beausir, L.S. Toth, J.-J. Fundenberger, and G. Gottstein, Texture evolution in commercially pure titanium after warm equal channel angular extrusion, Acta Mater. 59 (2011), pp. 1121–1133. doi: 10.1016/j.actamat.2010.10.045
- G.E. Dieter, Mechanical Metallurgy, McGraw-Hill Book, New York, 1961.