Micro-segregation model calculation of residual tin in boiler and pressure vessel steel

References

• K. Noro, M. Takeuchi, and Y. Mizukami, Necessity of scrap reclamation technologies and present conditions of technical development, ISIJ Int. 37 (1997), pp. 198–206. doi: 10.2355/isijinternational.37.198
   Web of Science ®Google Scholar
• M.P. Seah and E.D. Hondros, Grain boundary segregation, Proc. Royal Soc. London 335 (1973), pp. 191–212. doi: 10.1098/rspa.1973.0121
   Google Scholar
• H. Matsuoka, K. Osawa, M. Ono, and M. Ohmura, Influence of Cu and Sn on hot ductility of steels with various C content, ISIJ Int. 37 (1997), pp. 255–262. doi: 10.2355/isijinternational.37.255
   Web of Science ®Google Scholar
• C. Nagasaki and J. Kihara, Effect of copper and tin on hot ductility of ultra-low and 0.2% carbon steels, ISIJ Int. 37 (1997), pp. 523–530. doi: 10.2355/isijinternational.37.523
   Web of Science ®Google Scholar
• A.P. Gulyaev and A.V. Taran, Effect of purity on the temper brittleness of improved structural steels, Met. Sci. Heat. Treat. 13 (1971), pp. 844–848. doi: 10.1007/BF00713820
   Google Scholar
• E.T. Stephenson, Effect of recycling on residuals, processing, and properties of carbon and low-alloy steels. Metall. Mater. Trans. A 14 (1983), pp. 343–353. doi: 10.1007/BF02644212
   Web of Science ®Google Scholar
• H. Peng, W. Chen, L. Chen, and D. Guo, Effect of tin on hot ductility and high-temperature oxidation behavior of 20CrMnTi steel, High Temp. Mat. Proc. 33 (2014), pp. 179–185.
   Web of Science ®Google Scholar
• W.T. Nachtrab and Y.T. Chou, The effect of Sn, Al, and N on the hot ductility of a carbon-manganese steel between 700° and 1200°C. Mater. Trans. A 19 (1988), pp. 1305–1309. doi: 10.1007/BF02662591
   Web of Science ®Google Scholar
• N. Imai, N. Komatsubara, and K. Kunishige, Effect of Cu, Sn and Ni on hot workability of hot-rolled mild steel, ISIJ Int. 37 (1997), pp. 217–223. doi: 10.2355/isijinternational.37.217
   Web of Science ®Google Scholar
• S. Chen, R. Zhu, L. Xue, T. Lin, J. Li, and Y. Lin, Effects of elemental Sn on the properties and inclusions of the free-cutting steel, Int. J. Min. Met. Mater. 22 (2015), pp. 141–148. doi: 10.1007/s12613-015-1054-6
   Web of Science ®Google Scholar
• A. Pardo, M.C. Merino, M. Carboneras, A.E. Coy, and R. Arrabal, Pitting corrosion behaviour of austenitic stainless steels with Cu and Sn additions, Corros. Sci. 49 (2007), pp. 510–525. doi: 10.1016/j.corsci.2006.06.004
   Web of Science ®Google Scholar
• D. You, S.K. Michelic, P. Presoly, J. Liu, and C. Bernhard, Modeling inclusion formation during solidification of steel: a review, Metals. (Basel) 7 (2017), pp. 460. doi: 10.3390/met7110460
   Web of Science ®Google Scholar
• D. You, C. Bernhard, G. Wieser, and S. Michelic, Microsegregation model with local equilibrium partition coefficients during solidification of steels, Steel Res. Int. 87 (2016), pp. 840–849. doi: 10.1002/srin.201500216
   Web of Science ®Google Scholar
• T. Billotte, D. Daloz, B. Rouat, G. Tirand, J.R. Kennedy, V. Robin, and J. Zollinger, Microsegregation model including convection and tip undercooling: application to directional solidification and welding, Materials. (Basel) 11 (2018), pp. 1252. doi: 10.3390/ma11071252
   Web of Science ®Google Scholar
• D. You, S.K. Michelic, and C. Bernhard, Formation of multi-type inclusions during the cooling and solidification of steel: a trend model, Metals. (Basel) 8 (2018), pp. 452. doi: 10.3390/met8060452
   Web of Science ®Google Scholar
• T.W. Clyne and W. Kurz, Solute redistribution during solidification with rapid solid state diffusion, Metall. Mater. Trans. A 12 (1981), pp. 965–971. doi: 10.1007/BF02643477
   Web of Science ®Google Scholar
• T.F. Bower, H.D. Brody, and M.C. Flemings, Measurements of solute redistribution in dendritic solidification, Trans Metall. Soci. AIME 236 (1966), pp. 624–633.
   Google Scholar
• R. Pierer and C. Bernhard, On the influence of carbon on secondary dendrite arm spacing in steel, J. Mater. Sci 43 (2008), pp. 6938–6943. doi: 10.1007/s10853-008-2985-3
   Web of Science ®Google Scholar
• T.W. Clyne, M. Wolf, and W. Kurz, The effect of melt composition on solidification cracking of steel, with particular reference to continuous casting, Metall. Mater. Trans. B 13 (1982), pp. 259–266. doi: 10.1007/BF02664583
   Web of Science ®Google Scholar
• K. Dou, J. Qing, L. Wang et al., Research on internal crack susceptibility of continuous-casting bloom based on micro-segregation model. Acta. Metall. Sin. 12 (2014), pp. 1505–1512. (In Chinese).
   Google Scholar
• Y. Meng and B.G. Thomas, Heat-transfer and solidification model of continuous slab casting: CON1D, Metall. Mater. Trans. B 34 (2003), pp. 685–705. doi: 10.1007/s11663-003-0040-y
   Web of Science ®Google Scholar
• Y. Ueshima, N. Komatsu, S. Mizoguchi, and H. Kajioka, Effects of alloying elements on interdendritic microsegregation of carbon steel, Tetsu-to-Hagane 73 (1987), pp. 1551–1558. doi: 10.2355/tetsutohagane1955.73.11_1551
   Web of Science ®Google Scholar
• Y. Li, J. Han, and Z. Jiang, Micro-segregation of solutes in tin-containing ferritic stainless steel. J. Northeastern Univ. (Nat. Sci.) 36 (2015), pp. 502–507. (In Chinese).
   Google Scholar
• M.C.M. Cornelissen, Mathematical model for solidification of multicomponent alloys, Ironmak. Steelmak. 13 (1986), pp. 204–212.
   Web of Science ®Google Scholar
• S. Suzuki, K. Kuroki, H. Kobayashi, and N. Takahashi, Sn segregation at gain bundary and interface between MnS and matrix in Fe-3mass%Si alloys doped with tin, Mater. Trans. 33 (1992), pp. 1068–1076. doi: 10.2320/matertrans1989.33.1068
   Web of Science ®Google Scholar
• J. Han and Z. Jiang, Metallurgical behavior of inclusions in tin-containing ferritic stainless steel. J. Northeastern Univ. (Nat. Sci.) 35 (2015), pp. 700–703. (In Chinese).
   Google Scholar
• G. Sun and B. Song, Identification of Sn precipitates in C-Mn steel containing Sn. Chinese J. Eng. 39 (2017), pp. 1684–1691. (In Chinese).
   Google Scholar
• Y.D. Jiang, Z.L. Xue, and J. Zhang, Genetic analysis for large TiN inclusions in wire rod for tire cord steel of SWRH82A, J. Iron. Steel Res. Int. 21 (2014), pp. 91–94. doi: 10.1016/S1006-706X(14)60128-X
   Web of Science ®Google Scholar
• Z. Han and K. Cai, Study on a mathematical model of microsegregation in continuously cast slab. Acta. Metall. Sin. 36 (2000), pp. 869–873. (In Chinese).
   Google Scholar
• A. Yamanaka, K. Nakajima, and K. Okamura, Critical strain for internal crack formation in continuous casting, Ironmak. Steelmak. 22 (1995), pp. 508–512.
   Web of Science ®Google Scholar
• T. Matsumiya, H. Kajioka, S. Mizoguchi, Y. Ueshima, and H. Esaka, Mathematical analysis of segregation in continuously-cast slabs, Trans. ISIJ 24 (1984), pp. 873–882. doi: 10.2355/isijinternational1966.24.873
   Google Scholar
• J. Han, Manufacture technology, microstructure and properties of tin-bearing ferritic stainless steel, Ph.D. diss, Northeastern University, 2015. ( In Chinese).
   Google Scholar
• Y. Zhao, Z. He, Y. Weng, and B. Wu, Grain boundary segregation of trace Sn in high induction oriented silicon steel, Acta. Metall. Sin. 28 (1992), pp. 327–332.
   Google Scholar