An investigation of influencing of Sb and Bi contents on surface tensions associated with Pb-free Sn-Zn-Sb-Bi quaternary and sub-quaternary solder alloys

References

• J.-M. Song, T.-S. Lui, Y.-L. Chang, and L.-H. Chen, Effect of Zn content on the vibration fracture behavior of Sn-Zn and Sn-Zn-Bi solders, J. Electron. Mater. 35 (2006), pp. 929–936. doi: 10.1007/BF02692549
   Web of Science ®Google Scholar
• Z. Moser, W. Gasior, and J. Pstruś, Surface tension of liquid Ag-Sn alloys: Experiment versus modeling, J. Phase Equilib. 22 (2001), pp. 254–258. doi: 10.1361/105497101770338734
   Web of Science ®Google Scholar
• J. Pstruś, The role of physico-chemical properties of liquid solder in reactive wetting: The Cu/SnZnIn system, J. Min. Metall. B: Metall. 53 (2017), pp. 309–318. doi: 10.2298/JMMB170728037P
   Web of Science ®Google Scholar
• Z. Moser, W. Gasior, and J. Pstrus, Surface tension measurements of the Bi-Sn and Sn-Bi-Ag liquid alloys, J. Electron. Mater. 30 (2001), pp. 1104–1111. doi: 10.1007/s11664-001-0136-6
   Web of Science ®Google Scholar
• Z. Moser, W. Gąsior, J. Pstruś, I. Kaban, and W. Hoyer, Thermophysical properties of liquid In–Sn alloys, Int. J. Thermophys. 30 (2009), pp. 1811–1822. doi: 10.1007/s10765-009-0663-6
   Web of Science ®Google Scholar
• F. Dai, C. Cao, and B. Wei, Thermophysical properties of Ni-5% Sn alloy melt, Science in China Series G 49 (2006), pp. 236–245. doi: 10.1007/s11433-006-0236-7
   Google Scholar
• W. Gasior, Z. Moser, and J. Pstruś, Surface tension, density, and molar volume of liquid Sb-Sn alloys: Experiment versus modeling, J. Phase Equilib. 24 (2003), pp. 504–510. doi: 10.1361/105497103772084543
   Google Scholar
• F. Kohler, Zur Berechnung der thermodynamischen Daten eines ternären Systems aus den zugehörigen binären Systemen, Monatshefte für Chemie und verwandte Teile anderer Wissenschaften 91 (1960), pp. 738–740. doi: 10.1007/BF00899814
   Google Scholar
• Y.-M. Muggianu, M. Gambino, and J.-P. Bros, Enthalpies de formation des alliages liquides bismuth-étain-gallium à 723 k. Choix d’une représentation analytique des grandeurs d’excès intégrales et partielles de mélange, Journal de Chimie Physique 72 (1975), pp. 83–88. doi: 10.1051/jcp/1975720083
   Web of Science ®Google Scholar
• E. Guggenheim, Statistical thermodynamics of the surface of a regular solution, Trans. Faraday Soc. 41 (1945), pp. 150–156. doi: 10.1039/tf9454100150
   Google Scholar
• K. Grjotheim, J. Holm, and B. Lillebuen, Surface-tension of liquid binary and ternary chloride mixtures, Acta Chem. Scand. 26 (1972), pp. 2050–2062. doi: 10.3891/acta.chem.scand.26-2050
   Google Scholar
• J. Butler, The thermodynamics of the surfaces of solutions, Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character 135 (1932), pp. 348–375.
   Google Scholar
• G. Zeng and B. Friedrich, Influencing the Wettability of HSS-Steels by Ad-dition of Alloying Elements to the Zinc Bath, in Proceedings of EMC, 2009, p. 1.
   Google Scholar
• I. Egry, The surface tension of binary alloys: Simple models for complex phenomena, Int. J. Thermophys. 26 (2005), pp. 931–939. doi: 10.1007/s10765-005-6675-y
   Web of Science ®Google Scholar
• G. Toop, Predicting ternary activities using binary data, Trans. Metall. Soc. AIME 233 (1965), p. 850.
   Google Scholar
• M. Hillert, Empirical methods of predicting and representing thermodynamic properties of ternary solution phases, Calphad 4 (1980), pp. 1–12. doi: 10.1016/0364-5916(80)90016-4
   Web of Science ®Google Scholar
• X. Zhong, Y. Liu, K.-C. Chou, X. Lu, D. Zivkovic, and Z. Zivkovic, Estimating ternary viscosity using the thermodynamic geometric model, J. Phase Equilib. 24 (2003), pp. 7–11. doi: 10.1007/s11669-003-0002-8
   Web of Science ®Google Scholar
• D. Živković, Ž Živković, L. Yonghua, and K. Chou, Calorimetric investigations of the system Pb-Bi-Mg-Sb with Oelsen’s method. Part 2. comparison of experimentally obtained values for lead activity with results of thermodynamic predicting, J. Therm. Anal. Calorim. 66 (2001), pp. 785–793. doi: 10.1023/A:1013144122295
   Web of Science ®Google Scholar
• G. Kaptay, Partial surface tension of components of a solution, Langmuir 31 (2015), pp. 5796–5804. doi: 10.1021/acs.langmuir.5b00217
   PubMed Web of Science ®Google Scholar
• A. Xi and L. Wang, The Properties of Liquid Metals, Science Press, Beijing, 2006.
   Google Scholar
• L.J. Yan, Simulated calculation and its application of the surface tension of molten, Ph.D. diss., School of Material Science and Engineering, Beijing University of Science and Technology, Beijing, 2000.
   Google Scholar
• Z. Moser, W. Gasior, J. Pstruś, and S. Ksiezarek, Surface-tension measurements of the eutectic alloy (Ag-Sn 96.2 at.%) with Cu additions, J. Electron. Mater. 31 (2002), pp. 1225–1229. doi: 10.1007/s11664-002-0013-y
   Web of Science ®Google Scholar
• X. Liu, Y. Inohana, Y. Takaku, I. Ohnuma, R. Kainuma, K. Ishida, Z. Moser, W. Gasior, and J. Pstrus, Experimental determination and thermodynamic calculation of the phase equilibria and surface tension in the Sn-Ag-In system, J. Electron. Mater. 31 (2002), pp. 1139–1151. doi: 10.1007/s11664-002-0003-0
   Web of Science ®Google Scholar
• Z. Guo, M. Hindler, W. Yuan, and A. Mikula, Density and surface tension of liquid Bi–Cu–Sn alloys, Monatshefte für Chemie-Chemical Monthly 143 (2012), pp. 1617–1622. doi: 10.1007/s00706-012-0761-1
   Google Scholar
• Z. Guo, M. Hindler, W. Yuan, and A. Mikula, The density and surface tension of In–Sn and Cu–In–Sn alloys, Monatshefte für Chemie-Chemical Monthly 142 (2011), pp. 579–584. doi: 10.1007/s00706-011-0501-y
   Google Scholar
• Z. Moser, W. Gasior, J. Pstrus, S. Ishihara, X.J. Liu, I. Ohnuma, R. Kainuma, and K. Ishida, Surface tension and density measurements of Sn-Ag-Sb liquid alloys and phase diagram calculations of the Sn-Ag-Sb ternary system, Mater. Trans. 45 (2004), pp. 652–660. doi: 10.2320/matertrans.45.652
   Web of Science ®Google Scholar
• Z. Guo, S. Li, A. Mikula, and W. Yuan, Surface tension of liquid Au-Bi-Sn alloys, Rare Met. 31 (2012), pp. 250–254. doi: 10.1007/s12598-012-0500-0
   Web of Science ®Google Scholar
• R. Aune, L. Battezzati, R. Brooks, I. Egry, H.-J. Fecht, J.-P. Garandet, M. Hayashi, K.C. Mills, A. Passerone, and P.N. Quested, Thermophysical properties of in738Lc, Mm247Lc and Cmsx-4 in the liquid and high temperature solid phase, Superalloys 718 (2005), pp. 625–706.
   Google Scholar
• L. Battezzati and D. Baldissin, The ThermoLab project: Thermophysical properties of superalloys, High Temp. Mater. Processes 27 (2008), pp. 423–428. doi: 10.1515/HTMP.2008.27.6.423
   Web of Science ®Google Scholar
• T. Gancarz, Z. Moser, W. Gąsior, J. Pstruś, and H. Henein, A comparison of surface tension, viscosity, and density of Sn and Sn–Ag alloys using different measurement techniques, Int. J. Thermophys. 32 (2011), pp. 1210–1233. doi: 10.1007/s10765-011-1011-1
   Web of Science ®Google Scholar
• Z.G. Moser, W. Bukat, K. Pstrus, and J. Sitek, J trends in wettability studies of Pb-free solders. basic and application. Part I. Surface tension and density measurements of Sn-Zn and Sn-Zn-Bi-Sb alloys. Experiment vs. modeling, Arch. Metall. Mater. 53 (2008), pp. 1055–1063.
   Web of Science ®Google Scholar
• K. Bukat, Z. Moser, J. Sitek, W. Gąsior, M. Kościelski, and J. Pstruś, Investigation of Sn-Zn-Bi solders – Part I: Surface tension, interfacial tension and density measurements of SnZn7Bi solders, Solder Surf. Mt. Tech 22 (2010), pp. 10–16. doi: 10.1108/09540911011054145
   Web of Science ®Google Scholar
• T. Gancarz, Physicochemical properties of Sb-Sn-Zn alloys, J. Electron. Mater. 43 (2014), pp. 4374–4385. doi: 10.1007/s11664-014-3320-1
   Web of Science ®Google Scholar
• S. Ganesan and M.G. Pecht, Lead-free electronics, John Wiley & Sons, New York, 2006.
   Google Scholar
• K. Suganuma, Advances in lead-free electronics soldering, Curr. Opin. Solid State Mater. Sci. 5 (2001), pp. 55–64. doi: 10.1016/S1359-0286(00)00036-X
   Web of Science ®Google Scholar
• K. Seelig and D. Suraski, The status of lead-free solder alloys, in Electronic Components & Technology Conference, 2000. 2000 Proceedings. 50th, IEEE, 2000, pp. 1405–1409.
   Google Scholar
• S. Mhiaoui, F. Sar, and J. Gasser, Electrical and thermal conductivities and thermopower of some lead free solders (LFS) in the liquid and solid state, J. Non-Cryst. Solids 353 (2007), pp. 3628–3632. doi: 10.1016/j.jnoncrysol.2007.05.163
   Web of Science ®Google Scholar
• X. Wei, H. Huang, L. Zhou, M. Zhang, and X. Liu, On the advantages of using a hypoeutectic Sn–Zn as lead-free solder material, Mater. Lett. 61 (2007), pp. 655–658. doi: 10.1016/j.matlet.2006.05.029
   Web of Science ®Google Scholar
• J. Lee, T. Tanaka, M. Yamamoto, and S. Hara, Effect of oxygen on surface tension of liquid Ag-Sn alloys, Mater. Trans. 45 (2004), pp. 625–629. doi: 10.2320/matertrans.45.625
   Web of Science ®Google Scholar
• T. Gancarz, W. Gąsior, and H. Henein, Physicochemical properties of Sb, Sn, Zn, and Sb–Sn system, Int. J. Thermophys. 34 (2013), pp. 250–266. doi: 10.1007/s10765-013-1407-1
   Web of Science ®Google Scholar
• T. Iida and R.I. Guthrie, The Physical Properties of Liquid Metals, Clarendon Press, Oxford, 1988.
   Google Scholar
• O. Awe, Size difference effects on the bulk, and surface properties of Bi–Zn, Cu–Pb, K–Pb and K–Tl liquid alloys, Int. J. Mater. Res. 100 (2009), pp. 1593–1601. doi: 10.3139/146.110212
   Web of Science ®Google Scholar
• J. Pstruś, Z. Moser, and W. Gąsior, Surface properties of liquid In–Zn alloys, Appl. Surf. Sci. 257 (2011), pp. 3867–3871. doi: 10.1016/j.apsusc.2010.11.076
   Web of Science ®Google Scholar
• G. Klancnik and J. Medved, Thermodynamic investigation of the Al-Sb-Zn system, Materiali in Tehnologije 45 (2011), pp. 317–323.
   Web of Science ®Google Scholar
• A. Dinsdale, A. Watson, A. Kroupa, J. Vrestal, A. Zemanova, and J. Vizdal, Atlas of phase diagrams for lead-free soldering, A.T. Dinsdale, ed., COST Office, 2008.
   Google Scholar
• D.V. Malakhov, Thermodynamic assessment of the Bi-Zn system, Calphad 24 (2000), pp. 1–14. doi: 10.1016/S0364-5916(00)00011-0
   Google Scholar
• H. Ohtani and K. Ishida, A thermodynamic study of the phase equilibria in the Bi-Sn-Sb system, J. Electron. Mater. 23 (1994), pp. 747–755. doi: 10.1007/BF02651369
   Web of Science ®Google Scholar
• Z. Moser, W. Gasior, A. Debski, and J. Pstrus, Surdat: Database of physical properties of lead-free solders, J. Min. Metall. B: Metall. 43 (2007), pp. 125–130. doi: 10.2298/JMMB0702125M
   Web of Science ®Google Scholar
• R. Novakovic, D. Giuranno, E. Ricci, S. Delsante, D. Li, and G. Borzone, Bulk and surface properties of liquid Sb–Sn alloys, Surf. Sci. 605 (2011), pp. 248–255. doi: 10.1016/j.susc.2010.10.026
   Web of Science ®Google Scholar
• Y. Plevachuk, W. Hoyer, I. Kaban, M. Köhler, and R. Novakovic, Experimental study of density, surface tension, and contact angle of Sn–Sb-based alloys for high temperature soldering, J. Mater. Sci. 45 (2010), pp. 2051–2056. doi: 10.1007/s10853-009-4120-5
   Web of Science ®Google Scholar
• C. Sun, H. Geng, N. Zhang, X. Teng, and L. Ji, Viscous feature of Sb–Bi alloy under magnetic field, Mater. Lett. 62 (2008), pp. 73–76. doi: 10.1016/j.matlet.2007.04.070
   Web of Science ®Google Scholar
• K. Okajima and H. Sakao, Density and surface tension of molten zinc-bismuth alloys, Trans. Jpn. Inst. Met. 23 (1982), pp. 111–120. doi: 10.2320/matertrans1960.23.111
   Google Scholar
• M. Miyazaki, M. Mizutani, T. Takemoto, and A. Matsunawa, Measurement of surface tension with wetting balance, Quart. J. Japan Weld. Soc. 15 (1997), pp. 681–687. doi: 10.2207/qjjws.15.681
   Google Scholar
• Y. Nakamura, Y. Sakakibara, Y. Watanabe, and Y. Amamoto, Microstructure of solder joints with electronic components in lead-free solders, Solder Surf. Mt. Tech 10 (1998), pp. 10–12. doi: 10.1108/09540919810203748
   Web of Science ®Google Scholar
• T. Gancarz, J. Pstruś, W. Gąsior, and H. Henein, Physicochemical properties of Sn-Zn and SAC+Bi alloys, J. Electron. Mater. 42 (2013), pp. 288–293. doi: 10.1007/s11664-012-2336-7
   Web of Science ®Google Scholar
• Y. Matuyama, On the surface tension of molten metals and alloys, Sci. Rep. Tohoku Univ. 16 (1927), pp. 555–562.
   Google Scholar
• K. Bukat, Z. Moser, W. Gąsior, J. Sitek, M. Kościelski, and J. Pstruś, Trends in wettability studies df Pb-free solders. Basic and application. Part II. Relation between surface tension, interfacial tension and wertability of lead-free Sn-Zn and Sn-Bi-Sb alloys, Arch. Metall. Mater. 53 (2008), pp. 1065–1074.
   Web of Science ®Google Scholar