305
Views
9
CrossRef citations to date
0
Altmetric
Part A: Materials Science

Influence of variable diffusion coefficient on solid-liquid interface migration kinetics during transient liquid phase bonding

, &
Pages 2169-2184 | Received 16 Feb 2019, Accepted 29 Apr 2019, Published online: 15 May 2019

References

  • W.D. MacDonald and T.W. Eagar, Transient liquid phase bonding processes. Annu. Rev. Mater. Sci 1(1) (1992), pp. 93–100.
  • G.S.C.R. Houska, F. Dietrich, and G. Subbaraman, Time-dependent diffusion coefficients obtained from diffused films: the Cu-Ni system. Thin Solid Films 44 (1977), pp. 217–231. doi: 10.1016/0040-6090(77)90457-6
  • J. Ramirez and S. Liu, “Diffusion brazing in the nickel-boron system,” Weld. J. New York, no. October, pp. 365–376, 1992.
  • Y. Zhou, Analytical modeling of isothermal solidification during transient liquid phase (TLP) bonding. J. Mater. Sci. Lett 20 (2001), pp. 841–844. doi: 10.1023/A:1010914813875
  • R. Asthana, An analysis for moving boundary diffusion controlled growth in a finite domain with a concentration-dependent diffusion coefficient. J. Colloid Interface Sci 158 (1993), pp. 146–151. doi: 10.1006/jcis.1993.1240
  • T.C. Illingworth, I.O. Golosnoy, V. Gergely and T.W. Clyne, Numerical modelling of transient liquid phase bonding and other diffusion controlled. Proc. Iv Int. Conf. Temp. Capillarity 40 (2005), pp. 2505–2511.
  • T.C. Illingworth and I.O. Golosnoy, Numerical solutions of diffusion-controlled moving boundary problems which conserve solute. J. Comput. Phys 209(1) (2005), pp. 207–225. doi: 10.1016/j.jcp.2005.02.031
  • K.A. Ellis and R.A. Buhrman, Time-dependent diffusivity of boron in silicon oxide and oxynitride. Appl. Phys. Lett 74(7) (1999), pp. 967–969. doi: 10.1063/1.123425
  • M.K. Dinkel, P. Heinz, F. Pyczak, A. Volek, M. Ott, E. Affeldt, A. Vossberg, M. Göken and R. Singer, New boron and silicon free single crystal-diffusion brazing alloys. Proc. Int. Symp. Superalloys (2008), pp. 211–220.
  • M.M. Abdelfatah and O.A. Ojo, On the extension of processing time with increase in temperature during transient-liquid phase bonding. Metall. Mater. Trans. A Phys. Metall. Mater. Sci 40(2) (2009), pp. 377–385. doi: 10.1007/s11661-008-9726-8
  • O.A. Ojo and M.M. Abdelfatah, On deviation from parabolic behaviour during transient liquid phase bonding. Mater. Sci. Technol 24(6) (2008), pp. 739–743. doi: 10.1179/174328408X281958
  • C.W. Sinclair, G.R. Purdy and J.E. Morral, Transient liquid-phase bonding in two-phase ternary systems. Metall. Mater. Trans. A 31(4) (2000), pp. 1187–1192. doi: 10.1007/s11661-000-0114-2
  • K. Bai, F.L. Ng, T.L. Tan, T. Li and D. Pan, Understanding non-parabolic solidification kinetics in Ni-based alloys during TLP bonding via thermo-kinetic modelling. J. Alloys Compd 699 (2017), pp. 1084–1094. doi: 10.1016/j.jallcom.2016.12.403
  • T. Takenaka, M. Kajihara, N. Kurokawa and K. Sakamoto, Reactive diffusion between Ag-Au alloys and Sn at solid-state temperatures. Mater. Sci. Eng. A 427(1–2) (2006), pp. 210–222. doi: 10.1016/j.msea.2006.04.111
  • M. Schaefer, R.A. Fournelle and J. Liang, Theory for intermetallic phase growth between Cu and liquid Sn-Pb solder based on grain boundary diffusion control. J. Elect. Mater 27 (1998), pp. 1167–1176. doi: 10.1007/s11664-998-0066-7
  • H.G. Landau, Heat conduction in a melting solid. Q. Appl. Math 8 (1950), pp. 81–94. doi: 10.1090/qam/33441
  • W. Kass and M. O’Keeffe, Numerical solution of Fick’s equation with concentration-dependent diffusion coefficients. J. Appl. Phys 37(6) (1966), pp. 2377–2379. doi: 10.1063/1.1708822
  • M. Ghezzo, Diffusion from a thin layer into a semi-infinite medium with concentration dependent diffusion coefficient. Part II. J. Electrochem. Soc 120(8) (1973), pp. 1123–1127. doi: 10.1149/1.2403643
  • J. Crank, The Mathematics of Diffusion. 2nd ed. Clarendon Press, Oxford, 1975.
  • C. Wagner, Diffusion of lead chloride dissolved in solid silver chloride. J. Chem. Phys 18(9) (1950), pp. 1227–1230. doi: 10.1063/1.1747915

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.