Study of the mean size and fraction of the second-phase particles in a 13% chromium steel at high temperature

References

• D.H. Bratland, Ø Grong, H. Shercliff, O.R. Myhr, and S. Tjøtta, Overview No. 124 modelling of precipitation reactions in industrial processing, Acta Mater. 45 (1997), pp. 1–22. doi: 10.1016/S1359-6454(96)00100-0
   Web of Science ®Google Scholar
• S. Jiang, H. Wang, Y. Wu, X. Liu, H. Chen, M. Yao, B. Gault, D. Ponge, D. Raabe, A. Hirata, M. Chen, Y. Wang, and Z. Lu, Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation, Nature 544 (2017), pp. 460–464. doi: 10.1038/nature22032
   PubMed Web of Science ®Google Scholar
• D.P. Dunne, Review: Interaction of precipitation with recrystallisation and phase transformation in low alloy steels, Mater. Sci. Technol. 26 (2010), pp. 410–420. doi: 10.1179/026708309X12526555493350
   Web of Science ®Google Scholar
• E. Orowan, Internal Stress in Metals and Alloys, The Institute of Metals, London, 1948, p. 451.
   Google Scholar
• B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty, Work hardening, in Thermo-Mechanical Processing of Metallic Materials, R. Cahn, eds., Elsevier, 2007. pp. 55–81.
   Google Scholar
• Y.R. Wen, Y.P. Li, A. Hirata, Y. Zhang, T. Fujita, T. Furuhara, C.T. Liu, A. Chiba, and M.W. Chen, Synergistic alloying effect on microstructural evolution and mechanical properties of Cu precipitation-strengthened ferritic alloys, Acta Mater. 61 (2013), pp. 7726–7740. doi: 10.1016/j.actamat.2013.09.011
   Web of Science ®Google Scholar
• G. Couturier, C. Maurice, and R. Fortunier, Three-dimensional finite-element simulation of Zener pinning dynamics, Philos. Mag. 83 (2003), pp. 3387–3405. doi: 10.1080/1478643031000152771
   Web of Science ®Google Scholar
• R. Wagner, R. Kampmann, and P.W. Voorhees, Homogeneous second-phase precipitation, in Phase Transformations in Materials, G. Kostorz, ed., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, FRG, 2005. pp. 309–407.
   Google Scholar
• L.M. Brown and R.K. Ham, Dislocation-particle interactions, in Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., Applied Science Publishers, London, 1971. pp. 9–135.
   Google Scholar
• T. Gladman, Precipitation hardening in metals, Mater. Sci. Technol. 15 (1999), pp. 30–36. doi: 10.1179/026708399773002782
   Web of Science ®Google Scholar
• G. Engberg and L. Lissel, A physically based microstructure model for predicting the microstructural evolution of a C-Mn steel during and after hot deformation, Steel Res. Int. 79 (2008), pp. 47–58. doi: 10.1002/srin.200806315
   Web of Science ®Google Scholar
• G. Engberg, I. Kero, and K. Yvell, Modeling microstructure development during hot working of an austenitic stainless steel, Mater. Sci. Forum 753 (2013), pp. 423–426. doi: 10.4028/www.scientific.net/MSF.753.423
   Google Scholar
• N. Safara, G. Engberg, and J. Ågren, Modeling microstructure evolution in a martensitic stainless steel subjected to hot working using a physically based model, Metall. Mater. Trans. A 50 (2019), pp. 1480–1488. doi: 10.1007/s11661-018-5073-6
   Google Scholar
• A. Bjärbo and M. Hättestrand, Complex carbide growth, dissolution, and coarsening in a modified 12 pct chromium steel—an experimental and theoretical study, Metall. Mater. Trans. A 32 (2001), pp. 19–27. doi: 10.1007/s11661-001-0247-y
   Web of Science ®Google Scholar
• H. Magnusson and R. Sandström. Modelling of the Influence of Laves Phase on the Creep Properties in 9% Cr Steels, Proceedings of the ASME 2007 Pressure Vessels and Piping Conference, Volume 9: Eighth International Conference on Creep and Fatigue at Elevated Temperatures, San Antonio, Texas, USA. July 22–26, 2007. pp. 519–526. ASME. https://doi.org/10.1115/CREEP2007-26417.
   Google Scholar
• O. Prat, J. Garcia, D. Rojas, C. Carrasco, and A.R. Kaysser-Pyzalla, Investigations on coarsening of MX and M23C6 precipitates in 12% Cr creep resistant steels assisted by computational thermodynamics, Mater. Sci. Eng. A 527 (2010), pp. 5976–5983. doi: 10.1016/j.msea.2010.05.084
   Web of Science ®Google Scholar
• O. Prat, J. García, D. Rojas, J.P. Sanhueza, and C. Camurri, Study of nucleation, growth and coarsening of precipitates in a novel 9%Cr heat resistant steel: Experimental and modeling, Mater. Chem. Phys. 143 (2014), pp. 754–764. doi: 10.1016/j.matchemphys.2013.10.010
   Web of Science ®Google Scholar
• C.A. Schneider, W.S. Rasband, and K.W. Eliceiri, NIH image to ImageJ: 25 years of image analysis, Nat. Methods 9 (2012), pp. 671–675. doi: 10.1038/nmeth.2089
   PubMed Web of Science ®Google Scholar
• F.R.N. Nabarro, Z.S. Basinski, and D.B. Holt, The plasticity of pure single crystals, Adv. Phys. 13 (1964), pp. 193–323. doi: 10.1080/00018736400101031
   Web of Science ®Google Scholar
• M. Bonvalet, T. Philippe, X. Sauvage, and D. Blavette, The influence of size on the composition of nano-precipitates in coherent precipitation, Philos. Mag. 94 (2014), pp. 2956–2966. doi: 10.1080/14786435.2014.941029
   Web of Science ®Google Scholar
• K. Yvell, T.M. Grehk, and G. Engberg, Microstructure characterization of 316L deformed at high strain rates using EBSD, Mater. Charact. 122 (2016), pp. 14–21. doi: 10.1016/j.matchar.2016.10.017
   Web of Science ®Google Scholar
• Z. Hou, P. Hedström, Y. Xu, W. Di, and J. Odqvist, Microstructure of martensite in Fe–C–Cr and its implications for modelling of carbide precipitation during tempering, ISIJ Int. 54 (2014), pp. 2649–2656. doi: 10.2355/isijinternational.54.2649
   Web of Science ®Google Scholar
• A. Inoue and T. Masumoto, Carbide reactions (M3C→M7C3→M23C6→M6C) during tempering of rapidly solidified high carbon Cr-W and Cr-Mo steels, Metall. Trans. A 11 (1980), pp. 739–747. doi: 10.1007/BF02661203
   Web of Science ®Google Scholar
• Q. Chen, K. Wu, G. Sterner, and P. Mason, Modeling precipitation kinetics during heat treatment with Calphad-based tools, J. Mater. Eng. Perform 23 (2014), pp. 4193–4196. doi: 10.1007/s11665-014-1255-6
   Web of Science ®Google Scholar
• W. Steven and A.G. Haynes, The temperature of formation of martensite and bainite in low-alloy steels, J. Iron Steel Inst. 183 (1956), pp. 349–359.
   Google Scholar
• D.P. Koistinen and R.E. Marburger, A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels, Acta Metall. 7 (1959), pp. 59–60. doi: 10.1016/0001-6160(59)90170-1
   Google Scholar
• J. Gyhlesten Back. Simplified implementation of the Koistinen-Marburger model for use in finite element simulations, Proceedings of the 11th International Congress on Thermal Stresses, Salerno, Italy, June 5–9, 2016, pp. 107–110.
   Google Scholar