Effect of Al addition on microstructure and mechanical properties of as-cast Mg-4Y-3Nd alloy

References

• L. Xu, C.M. Liu, Y.C. Wan, X. Wang and H.C. Xiao, Effects of heat treatments on microstructures and mechanical properties of Mg-4Y-2.5Nd-0.7Zr alloy. Mater. Sci. Eng. A 558 (2012), pp. 1–6. doi: 10.1016/j.msea.2012.06.085
   Web of Science ®Google Scholar
• P.H. Fu, L.M. Peng, H.Y. Jiang, J.W. Chang and C.Q. Zhai, Effects of heat treatments on the microstructures and mechanical properties of Mg-3Nd-0.2Zn-0.4Zr (wt.%) alloy. Mater. Sci. Eng. A 486 (2008), pp. 183–192. doi: 10.1016/j.msea.2007.08.064
   Web of Science ®Google Scholar
• R. Lapovok, E. Zolotoyabko, A. Berner, A. Berner, Y. Kauffmann, E. Lakin, N. Larianovsky and D. Shechtman, Structure and mechanical property variations in Mg-Gd-Y-Zn-Zr alloy depending on its composition and processing conditions. Philos. Mag 96 (2016), pp. 1–25. doi: 10.1080/14786435.2016.1154204
   Web of Science ®Google Scholar
• K. Guan, Q. Yang, F.Q. Bu, X. Qiu, W. Sun, D.P. Zhang, T. Zheng, X.D. Niu, X.J. Liu and J. Meng, Microstructures and mechanical properties of a high-strength Mg-3.5Sm-0.6Zn-0.5Zr alloy. Mater. Sci. Eng. A 703 (2017), pp. 97–107. doi: 10.1016/j.msea.2017.07.058
   Web of Science ®Google Scholar
• N. Mo, Q.Y. Tan, M. Bermingham, Y.D. Huang, H. Dieringa, N. Hort and M.X. Zhang, Current development of creep-resistant magnesium cast alloys: A review. Mater. Design 155 (2018), pp. 422–442. doi: 10.1016/j.matdes.2018.06.032
   Web of Science ®Google Scholar
• H.H. Yu, Y.C. Xin, M.Y. Wang, and Q. Liu, Hall-Petch relationship in Mg alloys: A review. J. Mater. Sci. Technol 34 (2017), pp. 6–14.
   Web of Science ®Google Scholar
• C.L. Wang, J.C. Dai, W.C. Liu, L. Zhang and G.H. Wu, Effect of Al additions on grain refinement and mechanical properties of Mg-Sm alloys. J. Alloys Compd 620 (2015), pp. 172–179. doi: 10.1016/j.jallcom.2014.09.025
   Web of Science ®Google Scholar
• J.L. Li, R.S. Chen, Y.Q. Ma and W. Ke, Effect of Zr modification on solidification behavior and mechanical properties of Mg-Y-RE (WE54) alloy. J. Magn. Alloy 1 (2013), pp. 346–351. doi: 10.1016/j.jma.2013.12.001
   Google Scholar
• M. Qian, Z.C.G. Hildebrand and D.H. StJohn, The loss of dissolved zirconium in zirconium-refined magnesium alloys after remelting. Metall. Mater. Trans. A 40 (2009), pp. 2470–2479. doi: 10.1007/s11661-009-9928-8
   Google Scholar
• M. Qian, L. Zheng, D. Graham, M.T. Frost and D.H. StJohn, Settling of undissolved zirconium particles in pure magnesium melts. J. Light Met 1 (2001), pp. 157–165. doi: 10.1016/S1471-5317(01)00009-8
   Google Scholar
• D. Qiu, M.X. Zhang, J.A. Taylor and P.M. Kelly, A new approach to designing a grain refiner for Mg casting alloys and its use in Mg-Y-based alloys. Acta Mater. 57 (2009), pp. 3052–3059. doi: 10.1016/j.actamat.2009.03.011
   Web of Science ®Google Scholar
• J.C. Dai, M. Easton, S. Zhu, G.H. Wu and W.J. Ding, Grain refinement of Mg-10Gd Alloy by Al additions. J. Mater. Res 27 (2012), pp. 2790–2797. doi: 10.1557/jmr.2012.313
   Web of Science ®Google Scholar
• L. Wang, Y.C. Feng, E.J. Guo, Y. Yang, Y.H. Chen and L.P. Wang, Effect of cooling rate on grain refinement of Mg-3Nd alloys by aluminum. Int. J. Metalcast 12 (2018), pp. 906–918. doi: 10.1007/s40962-018-0224-5
   Web of Science ®Google Scholar
• D. Liu, J.F. Song, B. Jiang, Y. Zeng, Q.H. Wang, Z.T. Jiang, B. Liu, G.S. Huang and F.S. Pan, Effect of Al content on microstructure and mechanical properties of as-cast Mg-5Nd alloys. J. Alloys. Compd 737 (2018), pp. 263–270. doi: 10.1016/j.jallcom.2017.11.143
   Web of Science ®Google Scholar
• D. Qiu and M.X. Zhang, The nucleation crystallography and wettability of Mg grains on active Al2Y inoculants in an Mg-10wt% Y alloy. J. Alloys. Compd 586 (2014), pp. 39–44. doi: 10.1016/j.jallcom.2013.10.042
   Web of Science ®Google Scholar
• Y.H. Kang, H. Yan and R.S. Chen, Effects of heat treatment on the precipitates and mechanical properties of sand-cast Mg-4Y-2.3Nd-1Gd-0.6Zr magnesium alloy. Mater. Sci. Eng. A 645 (2015), pp. 361–368. doi: 10.1016/j.msea.2015.08.041
   Web of Science ®Google Scholar
• J.H. Zhang, S.J. Liu, R.Z. Wu, L.G. Hou and M.L. Zhang, Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg-Gd and Mg-Y systems. J. Magn. Alloy 6 (2018), pp. 277–291. doi: 10.1016/j.jma.2018.08.001
   Web of Science ®Google Scholar
• Z.L. Ning, J.Y. Yi, M. Qian, H.C. Sun, F.Y. Cao, H.H. Liu and J.F. Sun, Microstructure and elevated temperature mechanical and creep properties of Mg-4Y-3Nd-0.5Zr alloy in the product form of a large structural casting. Mater. Design 60 (2014), pp. 218–225. doi: 10.1016/j.matdes.2014.03.062
   Web of Science ®Google Scholar
• P.J. Apps, H. Karimzadeh, J.F. King and G.W. Lorimer, Precipitation reactions in magnesium-rare earth alloys containing Yttrium, Gadolinium or Dysprosium. Scripta Mater 48 (2003), pp. 1023–1028. doi: 10.1016/S1359-6462(02)00596-1
   Web of Science ®Google Scholar
• D. Qiu, M.X. Zhang and P.M. Kelly, Crystallography of heterogeneous nucleation of Mg grains on Al2Y nucleation particles in an Mg-10wt.% Y alloy. Scripta Mater 61 (2009), pp. 312–315. doi: 10.1016/j.scriptamat.2009.04.011
   Web of Science ®Google Scholar
• A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans and D.J. Bristow, Modelling of inoculation of metallic melts: Application to grain refinement of aluminum by Al-Ti-B. Acta Mater. 48 (2000), pp. 2823–2835. doi: 10.1016/S1359-6454(00)00094-X
   Web of Science ®Google Scholar
• A. Tronche and A.L. Greer, Electron back-scatter diffraction study of inoculation of Al. Philos. Mag. Lett 81 (2001), pp. 321–328. doi: 10.1080/09500830110041648
   Web of Science ®Google Scholar
• T.E. Quested and A.L. Greer, The effect of the size distribution of inoculant particles on as-cast grain size in aluminum alloys. Acta Mater. 52 (2004), pp. 3859–3868. doi: 10.1016/j.actamat.2004.04.035
   Web of Science ®Google Scholar
• M. Sun, G.H. Wu, W. Wang and W.J. Ding, Effect of Zr on the microstructure, mechanical properties and corrosion resistance of Mg–10Gd–3Y magnesium alloy. Mater. Sci. Eng. A 523 (2009), pp. 145–151. doi: 10.1016/j.msea.2009.06.002
   Web of Science ®Google Scholar