Pack-boriding of low alloy steel: microstructure evolution and migration behaviour of alloying elements

References

• V.I. Dybkov, L.V. Goncharuk, V.G. Khoruzha, A.V. Samelyuk, and V.R. Sidorko, Growth kinetics and abrasive wear resistance of boride layers on the Fe-15Cr alloy, Mater. Sci. Technol. 27 (2011), pp. 1502–1512. doi: 10.1179/026708310X12683157551577
   Web of Science ®Google Scholar
• E. Dokumaci, I. Ozkan, and B. Onay, Effect of boronizing on the cyclic oxidation of stainless steel, Surf. Coat. Technol. 232 (2013), pp. 22–25. doi: 10.1016/j.surfcoat.2013.04.047
   Web of Science ®Google Scholar
• H. Wang, Y. Zhao, X. Yuan, K. Chen, and R. Xu, Effects of boronizing treatment on corrosion resistance of 65Mn steel in two acid mediums, Phys. Procedia. 50 (2013), pp. 124–130. doi: 10.1016/j.phpro.2013.11.021
   Google Scholar
• I. Fedorova, F. Liu, F.B. Grumsen, Y. Cao, O.V. Mishin, and J. Hald, Fine (Cr, Fe)2B borides on grain boundaries in a 10Cr-0.01B martensitic steel, Scr. Mater. 156 (2018), pp. 124–128. doi: 10.1016/j.scriptamat.2018.07.021
   Web of Science ®Google Scholar
• Y. Gencer, Influence of manganese on pack boriding behaviour of pure iron, Surf. Eng. 27 (2011), pp. 634–638. doi: 10.1179/1743294411Y.0000000010
   Web of Science ®Google Scholar
• A. Calik, Y. Gencer, M. Tarakci, K.O. Gunduz, and A.E. Gulec, Boriding of equiatomic Fe-Mn binary alloy, Acta Phys. Pol. A. 123 (2013), pp. 449–452. doi: 10.12693/APhysPolA.123.449
   Web of Science ®Google Scholar
• Y. Azakli, S. Cengiz, M. Tarakci, and Y. Gencer, Characterisation of boride layer formed on Fe–Mo binary alloys, Surf. Eng. 32 (2016), pp. 589–595. doi: 10.1080/02670844.2016.1148322
   Web of Science ®Google Scholar
• Y. Yi, J. Xing, X. Ren, H. Fu, Q. Li, and D. Yi, Investigation on abrasive wear behaviour of Fe-B alloys containing various molybdenum contents, Tribol. Int. 135 (2019), pp. 237–245. doi: 10.1016/j.triboint.2019.03.005
   Web of Science ®Google Scholar
• Y. Azakli and M. Tarakci, Microstructural characterisation of borided binary Fe–W alloys, Surf. Eng. 34 (2018), pp. 226–234. doi: 10.1080/02670844.2016.1263712
   Web of Science ®Google Scholar
• Y. Azakli, K.O. Gunduz, M. Tarakci, and Y. Gencer, A comparative study on boride layer morphology of Fe-4Co, Fe-4V and Fe-4W binary alloys, Acta Phys. Pol. A. 127 (2015), pp. 1326–1330. doi: 10.12693/APhysPolA.127.1326
   Web of Science ®Google Scholar
• K.O. Gunduz, Y. Gencer, M. Tarakci, and A. Calik, The effect of vanadium on the boronizing properties of pure iron, Surf. Coat. Technol. 221 (2013), pp. 104–110. doi: 10.1016/j.surfcoat.2013.01.034
   Web of Science ®Google Scholar
• Y. Gencer, M. Tarakci, and A. Calik, Effect of titanium on the boronizing behaviour of pure iron, Surf. Coat. Technol. 203 (2008), pp. 9–14. doi: 10.1016/j.surfcoat.2008.07.009
   Web of Science ®Google Scholar
• A. Meneses-Amador, D. Sandoval-Juarez, G.A. Rodriguez-Castro, D. Fernandez-Valdes, I. Campos-Silva, R.C. Vega-Moron, and J.L. Arciniega-Martinez, Contact fatigue performance of cobalt boride coating, Surf. Coat. Technol. 353 (2018), pp. 346–354. doi: 10.1016/j.surfcoat.2018.07.104
   Web of Science ®Google Scholar
• R.Y. Li and Y.H. Duan, Anisotropic elastic properties of MB (M = Cr, Mo, W) monoborides: a first-principles investigation, Philos. Mag. 96 (2016), pp. 972–990. doi: 10.1080/14786435.2016.1149247
   Web of Science ®Google Scholar
• M. Kulka, N. Makuch, and M. Poplawski, Two-stage gas boriding of Nisil in N2–H2–BCl3 atmosphere, Surf. Coat. Technol. 244 (2014), pp. 78–86. doi: 10.1016/j.surfcoat.2014.01.057
   Web of Science ®Google Scholar
• M. Kulka, Current Trends in Boriding Techniques, Springer Nature, Switzerland, 2019.
   Google Scholar
• M. Kulka, P. Dziarski, N. Makuch, A. Piasecki, and A. Miklaszewski, Microstructure and properties of laser-borided Inconel 600-alloy, Appl. Surf. Sci. 284 (2013), pp. 757–771. doi: 10.1016/j.apsusc.2013.07.167
   Web of Science ®Google Scholar
• V. Sista, O. Kahvecioglu, G. Kartal, Q.Z. Zeng, J.H. Kim, O.L. Eryilmaz, and A. Erdemir, Evaluation of electrochemical boriding of Inconel 600, Surf. Coat. Technol. 215 (2013), pp. 452–459. doi: 10.1016/j.surfcoat.2012.08.083
   Web of Science ®Google Scholar
• S. Basturk, F. Senbabaoglu, C. Islam, M. Erten, I. Lazoglu, and T. Gulmez, Titanium machining with new plasma boronized cutting tools, Cirp Ann. Manuf. Techn. 59 (2010), pp. 101–104. doi: 10.1016/j.cirp.2010.03.095
   Web of Science ®Google Scholar
• A. Joshi and S.S. Hosmani, Pack-boronizing of AISI 4140 steel: boronizing mechanism and the role of container design, Mater. Manuf. Process. 29 (2014), pp. 1062–1072. doi: 10.1080/10426914.2014.921705
   Web of Science ®Google Scholar
• I. Campos-Silva, M. Palomar-Pardave, R. Perez Pasten-Borja, O. Kahvecioglu Feridun, D. Bravo-Barcenas, C. Lopez-Garcia, and R. Reyes-Helguera, Tribocorrosion and cytotoxicity of FeB-Fe2B layers on AISI 316 L steel, Surf. Coat. Technol. 349 (2018), pp. 986–997. doi: 10.1016/j.surfcoat.2018.05.085
   Web of Science ®Google Scholar
• I. Campos Silva, M. Ortiz Dominguez, M. Keddam, N. Lopez Perrusquia, A. Carmona Vargas, and M. Elias-Espinosa, Kinetics of the formation of Fe2B layers in gray cast iron: effects of boron concentration and boride incubation time, Appl. Surf. Sci. 255 (2009), pp. 9290–9295. doi: 10.1016/j.apsusc.2009.07.029
   Web of Science ®Google Scholar
• C.K.N. Oliveira, L.C. Casteletti, A. Lombardi Neto, G.E. Totten, and S.C. Heck, Production and characterization of boride layers on AISI D2 tool steel, Vacuum. 84 (2010), pp. 792–796. doi: 10.1016/j.vacuum.2009.10.038
   Web of Science ®Google Scholar
• O.A. Gomez-Vargas, M. Keddam, and M. Ortiz-Dominguez, Kinetics and tribological characterization of pack-borided AISI 1025 steel, High. Temp. Mat. Proc. 36 (2017), pp. 197–208.
   Google Scholar
• B. Beausir and J.J. Fundenberger, Analysis Tools for Electron and X-ray diffraction, ATEX - software, www.atex-software.eu, Université de Lorraine - Metz, 2017.
   Google Scholar
• T. Nelis and R. Payling, Glow Discharge Optical Emission Spectroscopy: A Practical Guide, Royal Society of Chemistry, Cambridge, 2003.
   Google Scholar
• J. Zhong, W. Qin, X. Wang, E. Medvedovski, J.A. Szpunar, and K. Guan, Mechanism of texture formation in iron boride coatings on low-carbon steel, Metall. Mater. Trans. A. 50 (2019), pp. 58–62. doi: 10.1007/s11661-018-5002-8
   Google Scholar
• M. Kulka, N. Makuch, and A. Piasecki, Nanomechanical characterization and fracture toughness of FeB and Fe2B iron borides produced by gas boriding of Armco iron, Surf. Coat. Technol. 325 (2017), pp. 515–532. doi: 10.1016/j.surfcoat.2017.07.020
   Web of Science ®Google Scholar
• C.M. Brakman, A.W.J. Gommers, and E.J. Mittemeijer, Boriding of Fe and Fe–C, Fe–Cr, and Fe–Ni alloys; boride-layer growth kinetics, J. Mater. Res. 4 (1989), pp. 1354–1370. doi: 10.1557/JMR.1989.1354
   Web of Science ®Google Scholar
• M. Keddam, R. Chegroune, M. Kulka, D. Panfil, P. Siwak, and S. Taktak, Characterization, tribological and mechanical properties of plasma paste borided AISI 316 steel, Trans. Indian Inst. Met. 71 (2018), pp. 79–90. doi: 10.1007/s12666-017-1142-6
   Google Scholar
• L.C. Casteletti, A.N. Lombardi, and G.E. Totten, Boriding, in Encyclopedia of Tribology, Wang Q.J., Chung Y.W., eds., Springer, Boston, MA, 2013. pp. 249–254.https://doi.org/10.1007/978-0-387-92897-5_727.
   Google Scholar
• Y. Duan, P. Li, Z. Chen, J. Shi, and L. Ma, Surface evolution and growth kinetics of Ti6Al4V alloy in pack boriding, J. Alloys Compd. 742 (2018), pp. 690–701. doi: 10.1016/j.jallcom.2018.01.383
   Web of Science ®Google Scholar
• S.S. Hosmani, R.E. Schacherl, and E.J. Mittemeijer, Kinetics of nitriding Fe-2 Wt Pct V alloy: mobile and immobile excess nitrogen, Metall. Mater. Trans. A. 38 (2007), pp. 7–16. doi: 10.1007/s11661-006-9046-9
   Google Scholar
• R.E. Schacherl, P.C.J. Graat, and E.J. Mittemeijer, The nitriding kinetics of iron-chromium alloys; the role of excess nitrogen, Metall. Mater. Trans. A. 35 (2004), pp. 3387–3398. doi: 10.1007/s11661-004-0175-8
   Web of Science ®Google Scholar
• V. Jain and G. Sundararajan, Influence of the pack thickness of the boronizing mixture on the boriding of steel, Surf. Coat. Technol. 149 (2002), pp. 21–26. doi: 10.1016/S0257-8972(01)01385-8
   Web of Science ®Google Scholar
• A.M. Gatey, S.S. Hosmani, C.A. Figueroa, S.B. Arya, and R.P. Singh, Role of surface mechanical attrition treatment and chemical etching on plasma nitriding behavior of AISI 304L steel, Surf. Coat. Technol. 304 (2016), pp. 413–424. doi: 10.1016/j.surfcoat.2016.07.020
   Web of Science ®Google Scholar
• S.S. Hosmani, R.E. Schacherl, and E.J. Mittemeijer, Nitrogen uptake by a Fe-V alloy: quantitative analysis of excess nitrogen, Acta Mater. 54 (2006), pp. 2783–2792. doi: 10.1016/j.actamat.2006.02.017
   Web of Science ®Google Scholar
• I. Campos Silva, M. Dominguez, N. Lopez-Perrusquia, A. Meneses-Amador, R. Escobar-Galindo, and J. Martınez-Trinidad, Characterization of AISI 4140 borided steel, Appl. Surf. Sci. 256 (2010), pp. 2372–2379. doi: 10.1016/j.apsusc.2009.10.070
   Web of Science ®Google Scholar