147
Views
4
CrossRef citations to date
0
Altmetric
Part A: Materials Science

Elastostatic field distributions in polycrystals and cracked media

ORCID Icon, &
Pages 661-687 | Received 24 Jul 2019, Accepted 25 Nov 2019, Published online: 27 Dec 2019

References

  • I. Sevostianov and V. Kushch, Effect of pore distribution on the statistics of peak stress and overall properties of porous material, Int. J. Solids Struct. 46(25–26) (2009), pp. 4419–4429. doi: 10.1016/j.ijsolstr.2009.09.002
  • M.I. Idiart, H. Moulinec, P. Ponte Castañeda, and P. Suquet, Macroscopic behavior and field fluctuations in viscoplastic composites: second-order estimates versus full-field simulations, J. Mech. Phys. Solids 54(5) (2006), pp. 1029–1063. doi: 10.1016/j.jmps.2005.11.004
  • N. Kowalski, L. Delannay, P. Yan, and J.-F. Remacle, Finite element modeling of periodic polycrystalline aggregates with intergranular cracks, Int. J. Solids Struct. 90 (2016), pp. 60–68. doi: 10.1016/j.ijsolstr.2016.04.010
  • L. Van Hove, The occurrence of singularities in the elastic frequency distribution of a crystal, Phys. Rev. 89(6) (1953), pp. 1189–1193. doi: 10.1103/PhysRev.89.1189
  • A.A. Abrikosov, J.C. Campuzano, and K. Gofron, Experimentally observed extended saddle point singularity in the energy spectrum of YBa2Cu3O6.9 and YBa2Cu4O8 and some of the consequences, Phys. C 214(1–2) (1993), pp. 73–79. doi: 10.1016/0921-4534(93)90109-4
  • P. Meunier and E. Villermaux, Van Hove singularities in probability density functions of scalars, C. R. Méc. 335(3) (2007), pp. 162–167. doi: 10.1016/j.crme.2007.02.001
  • F. Willot, Y.-P. Pellegrini, and P. Ponte Castañeda, Localization of elastic deformation in strongly anisotropic, porous, linear materials with periodic microstructures: exact solutions and dilute expansions, J. Mech. Phys. Solids 56(4) (2008), pp. 1245–1268. doi: 10.1016/j.jmps.2007.10.002
  • D. Cule and S. Torquato, Electric-field distribution in composite media, Phys. Rev. B. 58(18) (1998), pp. R11829–R11832. doi: 10.1103/PhysRevB.58.R11829
  • S. Giordano, Electrical behaviour of a single crack in a conductor and exponential laws for conductivity in micro cracked solids, Int. J. Appl. Electromagn. Mech. 26(1, 2) (2007), pp. 1–19. doi: 10.3233/JAE-2007-815
  • S. Giordano and L. Colombo, Local elastic fields around cracks and their stress density of states, Phys. Rev. B 76(17) (2007), p. 174120. doi: 10.1103/PhysRevB.76.174120
  • P.M. Duxbury, P.D. Beale, and C. Moukarzel, Breakdown of two-phase random resistor networks, Phys. Rev. B. 51(6) (1995), pp. 3476–3488. doi: 10.1103/PhysRevB.51.3476
  • B. Abdallah, F. Willot, and D. Jeulin, Stokes flow through a boolean model of spheres: representative volume element, Transp. Porous Media 109(3) (2015), pp. 711–726. doi: 10.1007/s11242-015-0545-2
  • M. Barthélémy and H. Orland, Local field probability distribution in random media, Phys. Rev. E 56(3) (1997), p. 2835. doi: 10.1103/PhysRevE.56.2835
  • Y.-P. Pellegrini, Field distributions and effective-medium approximation for weakly nonlinear media, Phys. Rev. B 61(14) (2000), pp. 9365–9372. doi: 10.1103/PhysRevB.61.9365
  • M. Bobeth and G. Diener, Field fluctuations in multicomponent mixtures, J. Mech. Phys. Solids 34 (1986), pp. 1–17. doi: 10.1016/0022-5096(86)90002-5
  • W. Kreher, Residual stresses and stored elastic energy of composites and polycrystals, J. Mech. Phys. Solids 38(1) (1990), pp. 115–128. doi: 10.1016/0022-5096(90)90023-W
  • P. Ponte Castañeda and P. Suquet. Nonlinear composites, in Advances in Applied Mechanics, Volume 34, Elsevier, E. van Der Giessen and T. Y. Wu, eds, 1998, pp. 171–302.
  • T.W. Anderson, An Introduction to Multivariate Statistical Analysis, Volume 2, Wiley, New York, NY, 1958.
  • P.J. Basser and S. Pajevic, A normal distribution for tensor-valued random variables: applications to diffusion tensor mri, IEEE Trans. Med. Imaging 22(7) (2003), pp. 785–794. doi: 10.1109/TMI.2003.815059
  • M.E. Johnson, Multivariate Statistical Simulation: A Guide to Selecting and Generating Continuous Multivariate Distributions, Wiley and Sons, New York, 2013.
  • P. Suquet and H. Moulinec. Numerical simulation of the effective elastic properties of a class of cell materials, in IMA Lecture Notes 99, K.M. Golden, G.R. Grimmett, R.D. James, G.W. Milton, and P.N. Sen, eds., Mathematics of Multiscale Materials, Springer-Verlag, New York, 1998.
  • R. Brenner, R.A. Lebensohn, and O. Castelnau, Elastic anisotropy and yield surface estimates of polycrystals, Int. J. Solids Struct. 46 (2009), pp. 3018–3026. doi: 10.1016/j.ijsolstr.2009.04.001
  • R.A. Lebensohn, O. Castelnau, R. Brenner, and P. Gilormini, Study of the antiplane deformation of linear 2D polycrystals with different microstructure, Int. J. Solids Struct. 42 (2005), pp. 5441–5459. doi: 10.1016/j.ijsolstr.2005.02.051
  • R.A. Lebensohn, Y. Liu, and P. Ponte Castañeda, On the accuracy of the self-consistent approximation for polycrystals: comparison with full-field numerical simulations, Acta Mater. 52 (2004), pp. 5347–5361. doi: 10.1016/j.actamat.2004.07.040
  • J.R. Willis, Bounds and self-consistent estimates for the overall properties of anisotropic composites, J. Mech. Phys. Solids 25 (1977), pp. 185–202. doi: 10.1016/0022-5096(77)90022-9
  • R. Brenner, O. Castelnau, and L. Badea, Mechanical field fluctuations in polycrystals estimated by homogenization techniques, Proc. R. Soc. Lond. A460 (2004), pp. 3589–3612. doi: 10.1098/rspa.2004.1278
  • J.L. Meijering, Interface area, edge length, and number of vertices in crystal aggregates with random nucleation, Philips Res. Rep. 8 (1953), pp. 270–290.
  • R.E. Miles, The random division of space, Adv. Appl. Probab. 4 (1972), pp. 243–266. doi: 10.2307/1425985
  • J.-B. Gasnier, F. Willot, H. Trumel, B. Figliuzzi, D. Jeulin, and M. Biessy, A Fourier-based numerical homogenization tool for an explosive material, Matériaux Tech. 103(3) (2015), p. 308. doi: 10.1051/mattech/2015019
  • A. Ambos, F. Willot, D. Jeulin, and H. Trumel, Numerical modeling of the thermal expansion of an energetic material, Int. J. Solids Struct. 60–61 (2015), pp. 125–139. doi: 10.1016/j.ijsolstr.2015.02.025
  • D. Bedrov, O. Borodin, G.D. Smith, T.D. Sewell, D.M. Dattelbaum, and L.L. Stevens, A molecular dynamics simulation study of crystalline 1,3,5-triamino-2,4,6-trinitrobenzene as a function of pressure and temperature, J. Chem. Phys. 131 (2009), p. 224703.
  • J.-B. Gasnier, F. Willot, H. Trumel, D. Jeulin, and M. Biessy, Thermoelastic properties of microcracked polycrystals. Part II: the case of jointed polycrystalline TATB, Int. J. Solids Struct. 155 (2018), pp. 257–274. doi: 10.1016/j.ijsolstr.2018.07.025
  • H. Moulinec and P. Suquet, A fast numerical method for computing the linear and non linear mechanical properties of the composites, C. R. Acad. Sci., Sér II 318 (1994), pp. 1417–1423.
  • F. Willot, Fourier-based schemes for computing the mechanical response of composites with accurate local fields, C. R. Méc. 343(3) (2015), pp. 232–245. doi: 10.1016/j.crme.2014.12.005
  • D. Ruer, Méthode vectorielle d'analyse de la texture, Ph.D. thesis, Université de Metz, France, 1976.
  • J.G. Berryman, Bounds and self-consistent estimates for elastic constants of random polycrystals with hexagonal, trigonal, and tetragonal symmetries, J. Mech. Phys. Solids 53(10) (2005), pp. 2141–2173. doi: 10.1016/j.jmps.2005.05.004
  • M.L. Williams, On the stress distribution at the base of a stationary crack, J. Appl. Mech. 24 (1957), pp. 109–114.
  • C.T. Sun and Z.H. Jin, Fracture Mechanics, Volume 10, Academic Press, Waltham, 2012.
  • J.A. Shohat and J.D. Tamarkin, The Problem of Moments, Volume 1, American Mathematical Soc., Providence, 1943.
  • V. John, I. Angelov, A.A. Öncül, and D. Thévenin, Techniques for the reconstruction of a distribution from a finite number of its moments, Chem. Eng. Sci. 62(11) (2007), pp. 2890–2904. doi: 10.1016/j.ces.2007.02.041
  • V.I. Kushch, S.V. Shmegera, and I. Sevostianov, Sif statistics in micro cracked solid: effect of crack density, orientation and clustering, Int. J. Eng. Sci. 47(2) (2009), pp. 192–208. doi: 10.1016/j.ijengsci.2008.09.014
  • J. Serra, The boolean model and random sets, Comput. Graph. Image Process. 12(2) (1980), pp. 99–126. doi: 10.1016/0146-664X(80)90006-4
  • F. Willot and Y.-P. Pellegrini, Fast Fourier transform computations and build-up of plastic deformation in 2D, elastic-perfectly plastic, pixelwise-disordered porous media, in Continuum Models and Discrete Systems CMDS 11, D. Jeulin, S. Forest, eds., École des Mines, Paris, 2008, pp. 443–449. Available at https://arxiv.org/abs/0802.2488.
  • J.-B. Gasnier, F. Willot, H. Trumel, D. Jeulin, and J. Besson, Thermoelastic properties of microcracked polycrystals. Part I: adequacy of Fourier-based methods for cracked elastic bodies, Int. J. Solids Struct. 155 (2018), pp. 248–256. doi: 10.1016/j.ijsolstr.2018.07.024
  • H. Horii and S. Nemat-Nasser, Overall moduli of solids with microcracks: load-induced anisotropy, J. Mech. Phys. Solids 31 (1983), pp. 155–171. doi: 10.1016/0022-5096(83)90048-0
  • A. Barroso, V. Mantič, and F. París, Singularity analysis of anisotropic multimaterial corners, Int. J. Fracture 119(1) (2003), pp. 1–23. doi: 10.1023/A:1023937819943
  • A. Barroso, V. Mantič, and F. París, Computing stress singularities in transversely isotropic multimaterial corners by means of explicit expressions of the orthonormalized Stroh-eigenvectors, Eng. Fract. Mech. 76(2) (2009), pp. 250–268. doi: 10.1016/j.engfracmech.2008.10.006
  • A. Barroso, D. Vicentini, V. Mantič, and F. París, Determination of generalized fracture toughness in composite multimaterial closed corners with two singular terms–part I: test proposal and numerical analysis, Eng. Fract. Mech. 89 (2012), pp. 1–14. doi: 10.1016/j.engfracmech.2011.12.014
  • V. Mantič, A. Barroso, and F. París. Singular elastic solutions in anisotropic multimaterial corners: applications to composites, in Mathematical Methods and Models in Composites, V. Mantič ed., Imperial College Press, London, 2014, pp. 425–495.
  • V. Mantič, F. Paris, and J. Canas, Stress singularities in 2D orthotropic corners. Int. J. Fract. 83(1) (1997), pp. 67–90. doi: 10.1023/A:1007336210450

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.