References
- S. Yamamoto, H. Yokoyama, K. Yamada and M. Niikura, Effects of the austenite grain size and deformation in the unrecrystallized austenite region on bainite transformation behavior and microstructure. ISIJ Int. 35 (1995), pp. 1020–1026. doi: 10.2355/isijinternational.35.1020
- M. Esmailian, The effect of austenite grain size on the growth of different ferrite morphologies in a Nb-microalloyed steel. Defect Diffus Forum 289–292 (2009), pp. 109–117. doi: 10.4028/www.scientific.net/DDF.289-292.109
- M.M. Aranda, B. Kim, R. Rementeria, C. Capdevila and C.G. de Andrés, Effect of prior austenite grain size on pearlite transformation in a hypoeuctectoid Fe-C-Mn steel. Metall Mater Trans. A 45A (2014), pp. 1778–1786. doi: 10.1007/s11661-013-1996-0
- S.J. Lee and Y.K. Lee, Effect of austenite grain size on martensitic transformation of a low alloy steel. Mater Sci Forum 475–479 (2005), pp. 3169–3172. doi: 10.4028/www.scientific.net/MSF.475-479.3169
- J. Barford and W.S. Owen, Effect of austenite grain size and temperature on rate of bainite formation. J. Iron Steel Inst 197 (1961), pp. 146–157.
- S.M.C. van Bohemen and J. Sietsma, Modelling of isothermal bainite formation based on the nucleation kinetics. Int J Mater Res 99 (2008), pp. 739–747. doi: 10.3139/146.101695
- M. Umemoto, K. Horiuchi and I. Tamura, Transformarion kinetics of bainite during isothermal holding and continuous cooling, Trans Iron Steel Inst Japan 22 (1982), pp. 854–861.
- S.J. Lee, J.S. Park and Y.K. Lee, Effect of austenite grain size on the transformation kinetics of upper and lower bainite in a low-alloy steel. Scr Mater 59 (2008), pp. 87–90. doi: 10.1016/j.scriptamat.2008.02.036
- L.W. Graham and H.J. Axton, J Iron Steel Inst 191 (1959), pp. 361–365.
- G. Xu, F. Liu, L. Wang and H. Hu, A new approach to quantitative analysis of bainitic transformation in a superbainite steel. Scr Mater 68 (2013), pp. 833–836. doi: 10.1016/j.scriptamat.2013.01.033
- A. Matsuzaki and H.K.D.H. Bhadeshia, Effect of austenite grain size and bainite morphology on overall kinetics of bainite transformation in steels. Mater Sci Technol 15 (1999), pp. 518–522. doi: 10.1179/026708399101506210
- F. Hu, P.D. Hodgson and K.M. Wu, Acceleration of the super bainite transformation through a coarse austenite grain size. Mater Lett 122 (2014), pp. 240–243. doi: 10.1016/j.matlet.2014.02.051
- S. M. Hasan, M. Ghosh, D. Chakrabarti and S. B. Singh, Development of continuously cooled low-carbon, low-alloy, high strength carbide-free bainitic rail steels, Mater Sci Eng A. 771 (2020), 138590.
- H. K. D. H. Bhadeshia, Bainite in Steels: Transformation, Microstructure and Properties, 2nd ed., The Institute of Materials, London, 2001.
- Thermo-Calc®, Thermodynamic Database TCFE6-TCS Steel/Fe-Alloys, Stockholm, 2009.
- W. Steven and A.G. Haynes, The temperature of formation of martensite and bainite in low-alloy steels: some effects of chemical composition. J Iron Steel Inst 183 (1956), pp. 349–359.
- C. García de Andrés, F.G. Caballero, C. Capdevila and D. San Martín, Revealing austenite grain boundaries by thermal etching: advantages and disadvantages. Mater Charact 49 (2003), pp. 121–127. doi: 10.1016/S1044-5803(03)00002-0
- D. Chakrabarti, C. Davis and M. Strangwood, Characterisation of bimodal grain structures in HSLA steels. Mater Charact 58 (2007), pp. 423–438. doi: 10.1016/j.matchar.2006.06.014
- B.D. Cullity, Elements of X-ray Diffraction, 2nd Ed., Addision-Wesley Publishing Company Inc, 1978.
- R.J. Hill and C.J. Howard, Quantitative phase analysis from neutron powder diffraction data using the Rietveld method. J Appl Crystallogr 20 (1987), pp. 467–474. doi: 10.1107/S0021889887086199
- L.Y. Lan, C.L. Qiu, D.W. Zhao, X.H. Gao and L.X. Du, Effect of austenite grain size on isothermal bainite transformation in low carbon microalloyed steel. Mater Sci Technol 27 (2011), pp. 1657–1663. doi: 10.1179/1743284710Y.0000000026
- D. A. Porter and K. E. Easterling, Phase Transformations in Metals and Alloys, 2nd ed., Chapman & Hall, London,1991.
- C.M. Wayman and H.K.D.H. Bhadeshia, Physicl Metallurgy, Vol. 2, Elesevier Science, Amsterdam, 1996.
- D.J. Dyson and B. Holmes, Effect of alloying additions on the lattice parameter of austenite. J. Iron Steel Inst 208 (1970), pp. 469–474.
- S.M.C. van Bohemen and D.N. Hanlon, A physically based approach to model the incomplete bainitic transformation in high-Si steels. Int. J. Mater. Res 103 (2012), pp. 987–991. doi: 10.3139/146.110744
- H. Matsuda and H.K.D.H. Bhadeshia, Kinetics of the bainite transformation. Proc R Soc London A 460 (2004), pp. 1707–1722. doi: 10.1098/rspa.2003.1225
- D.P. Koistinen and R.E. Marburger, A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels. Acta Metall. 7 (1959), pp. 59–60. doi: 10.1016/0001-6160(59)90170-1
- C.L. Magee, The nucleation of martensite, in Phase Transformations, H.I. Aaronson, V.F. Zackay, eds., ASM International, Ohio, 1970. pp. 115–156.
- S.M.C. van Bohemen, J. Sietsma, M.J.M. Hermans and I.M. Richardson, Kinetics of the martensitic transformation in low-alloy steel studied by means of acoustic emission. Acta Mater. 51 (2003), pp. 4183–4196. doi: 10.1016/S1359-6454(03)00236-2
- S. M. Hasan, S. Kumar, D. Chakrabarti, and S. B. Singh, Understanding the effect of prior bainite/martensite on the formation of carbide-free bainite. Philos Mag 100(7) (2020), pp. 797–821. doi: 10.1080/14786435.2020.1712486
- A. Navarro-López, J. Sietsma and M.J. Santofimia, Effect of prior athermal martensite on the isothermal transformation kinetics below Ms in a low-C high-Si steel. Metall Mater Trans. A 47A (2016), pp. 1028–1039. doi: 10.1007/s11661-015-3285-6