151
Views
1
CrossRef citations to date
0
Altmetric
Part A: Materials Science

Transient heat flow parameters and microstructure of the upward solidified eutectic Al–Si alloy: a theoretical and experimental study

ORCID Icon, ORCID Icon, , , & ORCID Icon
Pages 2659-2676 | Received 01 May 2020, Accepted 15 Jun 2020, Published online: 01 Jul 2020

References

  • G.A. Chadwick, Prog. Mater. Sci. 12 (1963–1965), pp. 99. doi: 10.1016/0079-6425(63)90037-9
  • K.A. Jackson and J.D. Hunt, Lamellar and rod eutectic growth, in Dynamics of Curved FrontsPierre PelcéAcademic Press, Inc. Published by Elsevier Inc., St. Jerome, Marseille, France, 1988. pp. 363–376. https://doi.org/10.1016/B978-0-08-092523-3.50040-X.
  • M.G. Day and A. Hellawell, Proc. Roy. Soc. A. 305 (1968), pp. 473.
  • C.A. Santos, J. Quaresma and A. Garcia, 319 (2001), pp. 174.
  • C.A. Santos, C.A. Siqueira, A. Garcia and J. Quaresma, Inv. Probl. Eng. 12 (2004), pp. 279. doi: 10.1080/10682760310001598706
  • M.D. Peres, C.A. Siqueira and A. Garcia, J. Alloys. Compd. 381 (2004), pp. 168. doi: 10.1016/j.jallcom.2004.03.107
  • I.L. Ferreira, J.E. Spinelli, B. Nestler and A. Garcia, 111 (2008), pp. 444.
  • J.E. Spinelli, I.L. Ferreira and A. Garcia, Struct. Multidisc. Optim. 31 (2006), pp. 241. doi: 10.1007/s00158-005-0562-9
  • B.L. Silva, N. Cheung, A. Garcia and J.E. Spinelli, J. Alloys Compd. 632 (2015), pp. 274. doi: 10.1016/j.jallcom.2015.01.140
  • A.S. Barros, A.P. Silva, I.L. Ferreira, O.L. Rocha and A.L. Moreira, Defect Diffus. Forum. 367 (2016), pp. 10. doi: 10.4028/www.scientific.net/DDF.367.10
  • Y. Natsume, Y. Oka, J. Ogawa and M. Ohno, Int. J. Heat Mass Transf. 150 (2020), pp. 119. doi: 10.1016/j.ijheatmasstransfer.2019.119222
  • R.V. Reyes, T.S. Bello, R. Kakitani, T.A. Costa, A. Garcia, N. Cheung and J.E. Spinelli, 685 (2017), pp. 235.
  • J.E. Spinelli, N. Cheung, P.R. Goulart and J.M.V. Quaresma, Int. J. Thermal. 51 (2012), pp. 145. doi: 10.1016/j.ijthermalsci.2011.08.014
  • D.B. Carvalho, A.L. Moreira, D.J. Moutinho, J.M. Filho and O.L. Rocha, Mat. Res. 17(2) (2013), pp. 498. doi: 10.1590/S1516-14392014005000015
  • H. Kaya, E. Ç adirli, M. Gunduz and A. Ulgen, J. Mater. Eng. Perform. 12(5) (2003), pp. 544. doi: 10.1361/105994903100277201
  • M. Gündüz, H. Kaya, E. Ç adirli and A. Ozmen, Mater. Sci. Eng. A. 369 (2004), pp. 215. doi: 10.1016/j.msea.2003.11.020
  • H. Kaya, E. Ç adirli and M. Gündüz, J. Mater. Eng. Perform. 16 (2007), pp. 12. doi: 10.1007/s11665-006-9002-2
  • D.B. Carvalho, E.C. Guimarães, A.L. Moreira, D.J. Moutinho, O.L. Rocha and J.M.D. Filho, Mat. Res. 16(4) (2013), pp. 874. doi: 10.1590/S1516-14392013005000072
  • M. Dias, R. Oliveira, R. Kakitani, N. Cheung, H. Henein, J.E. Spinelli and A. Garcia, J. Mater. Res. Technol (2020). doi:10.1016/j.jmrt.2020.01.083.
  • T.A. Costa, A.L. Moreira, D.J. Moutinho, M. Dias, I.L. Ferreira, J.E. Spinelli, O.L. Rocha and A. Garcia, Mater. Sci. Technol. 31 (2015), pp. 1103. doi: 10.1179/1743284714Y.0000000678
  • W. Hearn, A.-A. Bogno, J. Spinelli, J. Valloton and H. Henein, Metall. Mater. Trans. A. 50 (2019), pp. 1333. doi: 10.1007/s11661-018-5093-2
  • I. Ferreira, D. Moutinho, L. Gomes, O. Rocha and A. Garcia, Philos. Mag. Lett. 89(12) (2009), pp. 769. doi: 10.1080/09500830903292320
  • J.N. Silva, D.J. Moutinho, A.L. Moreira, I.L. Ferreira and O.L. Rocha, Mater. Chem. Phys. 130 (2011), pp. 179. doi: 10.1016/j.matchemphys.2011.06.032
  • E.P. Oliveira, G.M. Stieven, E.F. Lins and J.R. Vaz, Appl. Therm. Eng. 155 (2019), pp. 365. doi: 10.1016/j.applthermaleng.2019.03.084
  • J. Spinelli, I. Ferreira and A. Garcia, Struct. Multidiscipl. Optim. 31 (2006), pp. 241. doi: 10.1007/s00158-005-0562-9
  • Y. Nishida, W. Droste and S. Engler, Metall. Trans. B. 17 (1986), pp. 833. doi: 10.1007/BF02657147
  • W.D. Griffiths, Metall. Mat. Trans. B. 31 (2000), pp. 285. doi: 10.1007/s11663-000-0047-6
  • H.M. Sahin, K. Kocatepe, R. Kayikci and N. Akar, Energ. Convers. Manage. 47 (2006), pp. 19. doi: 10.1016/j.enconman.2005.03.021
  • J.C. Hwang, H.T. Chuang, S.H. Jong and W.S. Hwang, AFS Trans. 102 (1994), pp. 877–883.
  • S. Khan, C. Ravindran, D. Naylor and D.G.R. Sharma, AFS Trans. 108 (2000), pp. 445.
  • I.L. Ferreira, C.A. Santos, V.R. Voller and A. Garcia, Metall Mater Trans B. 35 (2004), pp. 285. doi: 10.1007/s11663-004-0030-8
  • V.R. Voller, Canad. Metall. Quarterly 37 (1998), pp. 169. doi: 10.1179/cmq.1998.37.3-4.169
  • D. Wang, C. Zhou and G. Xu, J. Mater. Proc. Techn. (2014), pp. 1275. doi: 10.1016/j.jmatprotec.2014.01.009
  • R.S. Barclay, P. Niessen and H.W. Kerr, J. Cryst. Growth 20(3) (1973), pp. 175. doi: 10.1016/0022-0248(73)90001-8
  • F. Yilmaz and R. Elliot, Met. Sci. 18(7) (1984), pp. 362. doi: 10.1179/030634584790419935
  • R.V. Reyes, R. Kakitani, T.A. Costa, J.E. Spinelli, N. Cheung and A. Garcia, Philos. Mag. Lett. 96(6) (2016), pp. 228–237. doi: 10.1080/09500839.2016.1192297
  • D. Bouchard, J. S. kirkaldy, Metall. Mater. Trans. B, .28 (1997) p. 651. doi: 10.1007/s11663-997-0039-x

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.