Temperature-dependence of plasticity and fracture in an Al-Cu-Li alloy

References

• M. Starink, P. Wang, I. Sinclair, and P. Gregson, Microstrucure and strengthening of Al–Li–Cu–Mg alloys and MMCs: II. Modelling of yield strength, Acta Mater. 47 (1999), pp. 3855–3868. doi: 10.1016/S1359-6454(99)00228-1
   Web of Science ®Google Scholar
• K. Jata, A. Hopkins, and R. Rioja. The anisotropy and texture of Al-Li alloys, in Materials Science Forum, Vol. 217. Trans Tech Publ, 1996, pp. 647–652, Baech, Switzerland.
   Google Scholar
• A.A. Csontos and E.A. Starke, The effect of inhomogeneous plastic deformation on the ductility and fracture behavior of age hardenable aluminum alloys, Int. J. Plasticity 21 (2005), pp. 1097–1118. doi: 10.1016/j.ijplas.2004.03.003
   Web of Science ®Google Scholar
• A. Ardell, Precipitation hardening, Metall. Trans. A 16 (1985), pp. 2131–2165. doi: 10.1007/BF02670416
   Web of Science ®Google Scholar
• H. Shercliff and M. Ashby, A process model for age hardening of aluminium alloys I: The model, Acta Metall. Mater. 38 (1990), pp. 1789–1802. doi: 10.1016/0956-7151(90)90291-N
   Google Scholar
• X. Huang, Grain orientation effect on microstructure in tensile strained copper, Scripta Mater. 38 (1998), pp. 1697–1703. doi: 10.1016/S1359-6462(98)00051-7
   Web of Science ®Google Scholar
• R. Crooks, Z. Wang, V. Levit, and R. Shenoy, Microtexture, micro structure and plastic anisotropy of AA2195, Mater. Sci. Eng. A 257 (1998), pp. 145–152. doi: 10.1016/S0921-5093(98)00833-8
   Web of Science ®Google Scholar
• E. Lee, P. Kalu, L. Brandao, O. Es-Said, J. Foyos, and H. Garmestani, The effect of off-axis thermomechanical processing on the mechanical behavior of textured 2095 Al–Li alloy, Mater. Sci. Eng. A 265 (1999), pp. 100–109. doi: 10.1016/S0921-5093(98)01150-2
   Web of Science ®Google Scholar
• S. Choi, F. Barlat, and J. Liu, Effect of precipitates on plastic anisotropy for polycrystalline aluminum alloys, Metall. Mater. Trans. A 32 (2001), pp. 2239. doi: 10.1007/s11661-001-0199-2
   Web of Science ®Google Scholar
• T. Sato, S. Hirosawa, K. Hirose, and T. Maeguchi, Roles of microalloying elements on the cluster formation in the initial stage of phase decomposition of Al-based alloys, Metal. Mater. Trans. A 34 (2003), pp. 2745–2755. doi: 10.1007/s11661-003-0176-z
   Web of Science ®Google Scholar
• T. Dorin, A. Deschamps, F. De Geuser, W. Lefebvre, and C. Sigli, Quantitative description of the T1 formation kinetics in an Al–Cu–Li alloy using differential scanning calorimetry, small-angle X-ray scattering and transmission electron microscopy, Philos. Mag. 94 (2014), pp. 1012–1030. doi: 10.1080/14786435.2013.878047
   Web of Science ®Google Scholar
• N. Nayan, S. Mahesh, M. Prasad, S. Murthy, and I. Samajdar, A phenomenological hardening model for an aluminium-lithium alloy, Int. J. Plasticity 118 (2019), pp. 215–232. doi: 10.1016/j.ijplas.2019.02.009
   Web of Science ®Google Scholar
• E. Voce, The relationship between stress and strain for homogeneous deformation, J. Inst. Metals 74 (1948), pp. 537–562.
   Google Scholar
• E. Voce, A practical strain hardening function, Metallurgia 51 (1955), pp. 219–226.
   Google Scholar
• U.F. Kocks, A.S. Argon, and M.F. Ashby, Thermodynamics and kinetics of slip, Prog. Mater. Sci. 19 (1975), pp. 1–281. doi: 10.1016/0079-6425(75)90005-5
   Web of Science ®Google Scholar
• U.F. Kocks and H. Mecking, Physics and phenomenology of strain hardening: the FCC case, Prog. Mats. Sci. 48 (2003), pp. 171–273. doi: 10.1016/S0079-6425(02)00003-8
   Web of Science ®Google Scholar
• F. Bachmann, R. Hielscher, and H. Schaeben, Grain detection from 2d and 3d EBSD data: Specification of the MTEX algorithm, Ultramicroscopy 111 (2011), pp. 1720–1733. doi: 10.1016/j.ultramic.2011.08.002
   PubMed Web of Science ®Google Scholar
• U.F. Kocks, C.N. Tomé, and H.R. Wenk, Texture and Anisotropy, Cambridge University Press, Cambridge, 1998.
   Google Scholar
• C. Tomé, G.R. Canova, U.F. Kocks, N. Christodoulou, and J.J. Jonas, The relation between macroscopic and microscopic strain hardening in F.C.C polycrystals, Acta Metall. 32 (1984), pp. 1637–1653. doi: 10.1016/0001-6160(84)90222-0
   Google Scholar
• C. Liu, Z. Ma, P. Ma, L. Zhan, and M. Huang, Multiple precipitation reactions and formation of θ'-phase in a pre-deformed Al–Cu alloy, Mater. Sci. Eng. A 733 (2018), pp. 28–38. doi: 10.1016/j.msea.2018.07.039
   Web of Science ®Google Scholar
• P. Ma, L. Zhan, C. Liu, Q. Wang, H. Li, D. Liu, and Z. Hu, Pre-strain-dependent natural ageing and its effect on subsequent artificial ageing of an al-cu-li alloy, J. Alloys Compd. 790 (2019), pp. 8–19. doi: 10.1016/j.jallcom.2019.03.072
   Web of Science ®Google Scholar
• A. Deschamps, M. Garcia, J. Chevy, B. Davo, and F. De Geuser, Influence of Mg and Li content on the microstructure evolution of alculi alloys during long-term ageing, Acta Mater. 122 (2017), pp. 32–46. doi: 10.1016/j.actamat.2016.09.036
   Web of Science ®Google Scholar
• R.J. Rioja and J. Liu, The evolution of Al–Li base products for aerospace and space applications, Metall. Mater. Trans. A 43 (2012), pp. 3325–3337. doi: 10.1007/s11661-012-1155-z
   Web of Science ®Google Scholar
• N.J. Kim and E.W. Lee, Effect of T1 precipitate on the anisotropy of Al–Li alloy 2090, Acta Metall. Mater. 41 (1993), pp. 941–948. doi: 10.1016/0956-7151(93)90028-Q
   Google Scholar
• J.J. Ruschau and K.V. Jata, WeldaliteTM 049 (Al 2095-T8): Anisotropy effects at cryogenic conditions, Tech. Rep., Dayton Univ OH Research Inst, 1993.
   Google Scholar
• H.J. Frost and M.F. Ashby, Deformation Mechanism Maps, Pergamon press, Oxford, 1982.
   Google Scholar
• J. Nie and B. Muddle, On the form of the age-hardening response in high strength aluminium alloys, Mater. Sci. Eng. A 319 (2001), pp. 448–451. doi: 10.1016/S0921-5093(01)01054-1
   Web of Science ®Google Scholar
• J. Chen, Ductile tearing of AA2198 aluminium-lithium sheets for aeronautic application, Ph.D. diss., Paris Institute of Technology, 2011.
   Google Scholar
• D. Steglich, H. Wafai, and W. Brocks, Anisotropic deformation and damage in aluminium 2198 T8 sheets, Int. J. Damage Mech. 19 (2010), pp. 131–152. doi: 10.1177/1056789508101916
   Web of Science ®Google Scholar