Analysis of temperature effect on isothermal solidification completion time during transient liquid phase bonding

References

• Z. Mao, T. Niu, Q. Wang, Y. Nie, J. Yan, J. Deng and L. Yue, Ultrasound-induced transient liquid-phase bonding of Mg/Cu dissimilar metals with Zn interlayer in air. Mater. Lett 268 (2020), pp. 127483.
   Web of Science ®Google Scholar
• O.B. Dehkordi and A.M. Hadian, Effect of time and temperature on TLP bonding of alumina using a bismuth oxide interlayer. Ceram. Int 42 (2016), pp. 1705–1712.
   Web of Science ®Google Scholar
• Y. Tian, H. Fang, N. Ren, Y. Zhao, B. Chen, F. Wu and K. Paik, Reliable single-phase micro-joints with high melting point for 3D TSV chip stacking. J. Alloys Compd 828 (2020), pp. 154468.
   Web of Science ®Google Scholar
• S. Vazirian and A. Farzadi, Dissimilar transient liquid phase bonding of Ti-6Al-4V and Co-Cr-Mo biomaterials using a Cu interlayer: Microstructure and mechanical properties. J. Alloys Compd 829 (2020), pp. 154510.
   Web of Science ®Google Scholar
• A. Malekan, M. Farvizi, S.E. Mirsalehi, N. Saito, and K. Nakashima, Influence of bonding time and transient liquid phase bonding behavior of Hastelloy X using Ni-Cr-B-Si-Fe filler alloy. Mater Sci Eng. 755 (2019), pp. 37–49.
   Google Scholar
• T. Lin, H. Li, P. He, H. Wei, L. Li and J. Feng, Microstructure evolution and mechanical properties of transient liquid phase (TLP) bonded joints of TiAl intermetallics. Intermetallics 37 (2013), pp. 59–64.
   Web of Science ®Google Scholar
• S.S.S. Afghahi, A. Ekrami, S. Farahany and A. Jahangiri, Effect of bonding parameters on microstructure development during TGTLP bonding of Al7075 alloy. Philos. Mag 94(11) (2014), pp. 1166–1176.
   Web of Science ®Google Scholar
• N. Sheng, J. Liu, T. Jin, X. Sun and Z. Hu, Isothermal solidification stage during transient liquid-phase bonding single-crystal superalloys. Philos. Mag 94(11) (2014), pp. 1219–1234.
   Web of Science ®Google Scholar
• G. Yang, A. Bhowmik, B. Nagarajan, X. Song, S.C. Tan and M.J. Tam, Bonding temperature effects on the wide gap transient liquid phase bonding of Inconel 718 using BNi-2 paste filler metal. Appl. Surf. Sci 484 (2019), pp. 1223–1233.
   Web of Science ®Google Scholar
• A. Ghasemi and M. Pouranvari, Fast isothermal solidification during transient liquid phase bonding of a nickel alloy using pure copper filler metal: solubility vs diffusivity. Metall. Mater. Trans 50A (2019), pp. 2235–2245.
   Web of Science ®Google Scholar
• D.M. Turriff and S.F. Corbin, Quantitative thermal analysis of transient liquid-phase-sintered Cu-Ni powders. Metall Mater Trans. 39 (2008), pp. 28–38.
   Google Scholar
• D.E. Michael. Analyses of isothermal solidification kinetics during transient liquid phase bonding of silver with aluminium and copper filler metals, M.Sc. diss., University of Manitoba, 2018.
   Google Scholar
• N.P. Wikstrom, O.A. Ojo, and M.C. Chaturvedi, Influence of process parameters on microstructure of transient liquid phase bonded Inconel 738LC superalloy with Amdry DF-3 interlayer. Mater Sci Eng. 417 (2006), pp. 299–306.
   Google Scholar
• X. Yue, F. Liu, H. Chen, D. Wan and H. Qin, Effect of bonding temperature on microstructure evolution during TLP bonding of a Ni3Al based superalloy, IC10 MATEC web of conferences, 2018.
   Google Scholar
• V. Jalilvand, H. Omidvar, M.R. Rahimipour and H.R. Shakeri, Influence of bonding variables on transient liquid phase bonding behaviour of nickel based superalloy IN-738LC. Mater. Des 52 (2013), pp. 36–46.
   Web of Science ®Google Scholar
• M. Pouranvari, A. Ekrami and A.H. Kokabi, Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy. J. Alloys Compd 406 (2009), pp. 270–275.
   Google Scholar
• J.E. Ramirez and S. Liu, Diffusion Brazing in the Nickel-Boron system. Weld. J 71(10) (1992), pp. 365–376.
   Web of Science ®Google Scholar
• W.D. Murray and F. Landis, Numerical and machine solutions of transient liquid heat-conduction problems involving melting or freezing. Part I-Method of analysis and sample solutions. J. Heat Transfer 81(2) (1959), pp. 106–112.
   Google Scholar
• A. Ghanbar and O.A. Ojo, Effect of non-planar geometry on diffusion kinetics during brazing repair process. Mater. Sci. Technol 36(3) (2020), pp. 320–326.
   Web of Science ®Google Scholar
• A. Sawatzky and F.E. Jaumot Jr, Diffusion of the elements of the IB and IIB subgroups in silver. J. Metals 9 (1957), pp. 1207.
   Google Scholar
• Y. Zhou and T. North, Process modeling and optimized parameter selection during transient liquid phase bonding. Z. Für. Met 85(11) (1994), pp. 775–780.
   Google Scholar
• B. Binesh and A. Jazayeri Gharehbagh, Transient liquid phase bonding of IN738LC/MBF-15/IN738LC: solidification behavior and material properties. J. Mater. Sci. Tech 32(11) (2016), pp. 1137–1151.
   Web of Science ®Google Scholar
• J.K. Kim, H.J. Park, D.N. Shim and D.J. Kim, Effect of bonding parameters on microstructural characteristics during TLP bonding of directionally solidified Ni-based superalloy. J. Manuf. Process 30 (2017), pp. 208–216.
   Web of Science ®Google Scholar
• Z. Wang, L. Fang, I. Cotton and R. Freer, Ni-Cu interdiffusion and its implication for ageing in Ni-coated Cu conductors. Mater. Sci. Engno. 198B (2015), pp. 86–94.
   Google Scholar
• D. Ansel, I. Thibon, M. Boliveau and J. Debuigne, Interdiffusion in the body cubic centered β-phase of Ta-Ti alloys. Acta. Mater 46(2) (1998), pp. 423–430.
   Web of Science ®Google Scholar