Effect of plasma carbonitriding on the high-temperature tribological properties of a TiAlCrN coating on 300M steel by multi-arc ion plating

References

• W.D. Zhao, D.X. Liu, R. Chiang, H.F. Qin and C. Ye, Effects of ultrasonic nanocrystal surface modification on the surface integrity, microstructure, and wear resistance of 300M martensitic ultrahigh strength steel. J Mater Process Tech 285 (2020), pp. 116767.
   Web of Science ®Google Scholar
• D.S. Sun, D. Fabijanic, C. Barr, Q.C. Liu, K. Walker, N. Matthews, N. Orchowski, M. Easton and M. Brandt, In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates. Surf Coat Tech 333 (2018), pp. 210–219.
   Web of Science ®Google Scholar
• S.S. Zhang, M.Q. Li, Y.G. Liu, J. Luo and T.Q. Liu, The growth behavior of austenite grain in the heating process of 300M steel. Mat Sci Eng A-Struct 528 (2011), pp. 4967–4972.
   Google Scholar
• D. Santos, G. Vasconcelos, A.J. Abdalla, M.S.F. Lima and F. Souza Neto, Surface characterization in a 300M Bainitic steel laser carburizing. Procedia. Eng. 114 (2015), pp. 322–329.
   Google Scholar
• H. Saito, H.J. Jung, E. Shamoto, Y. Hara and T. Hara, Suppression of tool damage in ultraprecision diamond machining of stainless steel by applying electron-beam-excited plasma nitriding. Precis Eng 63 (2020), pp. 126–136.
   Web of Science ®Google Scholar
• G.M. Zheng, X. Cheng, X.X. Yang, R.F. Xu, J. Zhao and G.Y. Zhao, Self-organization wear characteristics of MTCVD-TiCN-Al2O3 coated tool against 300M steel. Ceram. Int. 43 (2017), pp. 13214–13223.
   Web of Science ®Google Scholar
• J. Tomków, A. Czupryński, and D. Fydrych, The abrasive wear resistance of coatings manufactured on high-strength low-alloy (HSLA) offshore steel in wet welding conditions. Coatings 10(3) (2020), pp. 219). https://doi.org/10.3390/coatings10030219.
   Web of Science ®Google Scholar
• A. Mishra and J. Maity, Wear behavior of an ultra-high-strength Eutectoid steel. J. Mater. Eng. Perform. 27 (2018), pp. 398–410.
   Web of Science ®Google Scholar
• P. Karvankova, M.G.J. Veprek-Heijman, O. Zindulka, A. Bergmaier and S. Veprek, Superhard nc-TiN/a-BN and nc-TiN/a-TiBx/a-BN coatings prepared by plasma CVD and PVD: a comparative study of their properties. Surf Coat Tech 163-164 (2003), pp. 149–156.
   Web of Science ®Google Scholar
• M.Z.B. Abdullah, A.N.B. Abdullah, M.H.B. Othman, M.A.B. Ahmad and P. Hussain, Pin-on-disc tribotest of Cr/CrN/CrCN/ZrN multilayer coatings by physical vapour deposition (PVD). Mater. Today 16 (2019), pp. 2067–2071.
   Google Scholar
• A.K. Krella, A. Czyżniewski, A. Gilewicz, and G. Gajowiec, Experimental study of the Influence of deposition of multilayer CrN/CrCN PVD coating on Austenitic steel on resistance to cavitation erosion. Coatings 10(5) (2020), pp. 1–16. https://doi.org/10.3390/coatings10050487.
   Web of Science ®Google Scholar
• D. Er, G.T.P. Azar, K. Kazmanli and M. Ürgen, The corrosion protection ability of TiAlN coatings produced with CA-PVD under superimposed pulse bias. Surf Coat Tech 346 (2018), pp. 1–8.
   Web of Science ®Google Scholar
• H.C. Fals, M.J.X. Belém, A.S. Roca, L. Fanton and C.R.C. Lima, Phase transformation of Nb2O5 during the formation of flame sprayed coatings and its influence on the adhesion strength, abrasive wear and slurry erosive wear. Wear 426-427 (2019), pp. 277–284.
   Web of Science ®Google Scholar
• N. Morita, Generation and propagation behavior of laser induced thermal cracks. J Ceram Soc Jap 101 (1993), pp. 522–527.
   Web of Science ®Google Scholar
• A.R. Shugurov and M.S. Kazachenok, Mechanical properties and tribological behavior of magnetron sputtered TiAlN/TiAl multilayer coatings. Surf Coat Tech 353 (2018), pp. 254–262.
   Web of Science ®Google Scholar
• X.D. Sui, G.J. Li, H.B. Zhou, S.T. Zhang, Y. Yu, Q. Wang and J.Y. Hao, Evolution behavior of oxide scales of TiAlCrN coatings at high temperature. Surf Coat Tech 360 (2019), pp. 133–139.
   Web of Science ®Google Scholar
• L. Ning, S.C. Veldhuis and K. Yamamoto, Investigation of wear behavior and chip formation for cutting tools with nano-multilayered TiAlCrN/NbN PVD coating. Int J Mach Tool Manu 48 (2008), pp. 656–665.
   Web of Science ®Google Scholar
• G.S. Fox-Rabinovich, K. Yamomoto, S.C. Veldhuis and G.K. Dosbaeva, Tribological adaptability of TiAlCrN PVD coatings under high performance dry machining conditions. Surf Coat Tech 200 (2005), pp. 1804–1813.
   Web of Science ®Google Scholar
• J. Zheng, S.H. Zhang, P. Wu, S.C. Kwon and W.L. Chen, Microstructures and mechanical properties of duplex-treated composite ceramic coatings with and without compound layer. Ceram. Int. 41 (2015), pp. 2519–2526.
   Google Scholar
• W.L. Chen, D.D. Zhang, D.C. Yao and X.N. Meng, TEM study on the vein-like grain boundary structures in nitrocarburized cool-work tool steels and its formation mechanism. Surf Coat Tech 324 (2017), pp. 376–381.
   Web of Science ®Google Scholar
• W.L. Chen, C.L. Wu, Z.R. Liu, S. Ni, Y. Hong, Y. Zhang and J.H. Chen, Phase transformations in the nitrocarburizing surface of carbon steels revisited by microstructure and property characterizations. Acta Mater. 61 (2013), pp. 3963–3972.
   Web of Science ®Google Scholar
• W.L. Chen, J. Zheng, Y. Lin, S.C. Kwon and S.H. Zhang, Comparison of AlCrN and AlCrTiSiN coatings deposited on the surface of plasma nitrocarburized high carbon steels. Appl. Surf. Sci. 332 (2015), pp. 525–532.
   Web of Science ®Google Scholar
• S.W. Zuo, Q. Miao, W.P. Liang, F.N. Xiao, H.C. Ma and H. Zhao, Tribological studies of carbonitrided coatings synthesized on the 300M steels by double-glow plasma alloying. Mater. Res. Express 6 (2020), pp. 126432.
   Web of Science ®Google Scholar
• P.L. Ge, M.D. Bao, H.J. Zhang, K. You and X.P. Liu, Effect of plasma nitriding on adhesion strength of CrTiAlN coatings on H13 steels by closed field unbalanced magnetron sputter ion plating. Surf Coat Tech 229 (2013), pp. 146–150.
   Web of Science ®Google Scholar
• J.L. Lin, B. Wang, Y.X. Ou, W.D. Sproul, I. Dahan and J.J. Moore, Structure and properties of CrSiN nanocomposite coatings deposited by hybrid modulated pulsed power and pulsed dc magnetron sputtering. Surf Coat Tech 216 (2013), pp. 251–258.
   Web of Science ®Google Scholar
• S.K. Yadav, J. Wang and X.Y. Liu, Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers. J. Appl. Phys. 119 (2016), pp. 224304.
   Web of Science ®Google Scholar
• C.I. Hsieh, T.M. Pan, J.C. Lin, Y.B. Peng, T.Y. Huang, C.R. Wu and S. Shih, Structural properties of Al2O3 dielectrics grown on tin metal substrates by atomic layer deposition. Appl. Surf. Sci. 255 (2009), pp. 3769–3772.
   Google Scholar
• M. Nordin, M. Larsson and S. Hogmark, Mechanical and tribological properties of multilayered PVD TiN/CrN, TiN/MoN, TiN/NbN and TiN/TaN coatings on cemented carbide. Surf. Coat. Technol. 106 (1998), pp. 234–241.
   Web of Science ®Google Scholar
• B.J. Xiao, J. Liu, F. Liu, X. Zhong, X.L. Xiao, T.F. Zhang and Q.M. Wang, Effects of microstructure evolution on the oxidation behavior and high-temperature tribological properties of AlCrN/TiAlSiN multilayer coatings. Ceram. Int. 44 (2018), pp. 23150–23161.
   Web of Science ®Google Scholar
• M.F. Peker, ÖN Cora and M. Koç, Investigations on the variation of corrosion and contact resistance characteristics of metallic bipolar plates manufactured under long-run conditions. Int J Hydrogen Energ 36 (2011), pp. 15427–15436.
   Web of Science ®Google Scholar
• S. Khanchaiyaphum, C. Saikaew, A. Wisitsoraat and S. Siwawut, Wear behaviours of filtered cathodic arc deposited TiN, TiAlSiN and TiCrAlSiN coatings on AISI 316 stainless steel fishing net-weaving machine components under dry soft-sliding against nylon fibres. Wear 390-391 (2017), pp. 146–154.
   Web of Science ®Google Scholar
• N.R. He, H.X. Li, L. Ji, X.H. Liu, H.D. Zhou and J.M. Chen, High temperature tribological properties of TiAlSiN coatings produced by hybrid PVD technology. Tribol. Int. 98 (2016), pp. 133–143.
   Web of Science ®Google Scholar
• G.G. Fuentes, E. Almandoz, R. Pierrugues, R. Martínez, R.J. Rodriguez, J. Caro and M. Vilaseca, High temperature tribological characterisation of TiAlSiN coatings produced by cathodic arc evaporation. Surf Coat Tech 205 (2010), pp. 1368–1373.
   Web of Science ®Google Scholar