Effect of shear deformation on microstructure and texture evolution in commercially pure titanium

References

• R.R. Boyer, An overview on the use of titanium in the aerospace industry. Mater. Sci. Eng. A 213 (1996), pp. 103–114.
   Web of Science ®Google Scholar
• I. Gurrappa, Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications. Mater. Charact. 51 (2003), pp. 131–139.
   Web of Science ®Google Scholar
• P.G. Patridge, The crystallography and deformation modes of hexagonal close packed. Int. Mater. Rev. 12 (1967), pp. 169–194.
   Google Scholar
• H. Conrad, Effect of interstitial solutes on the strength and ductility of titanium. Prog. Mater. Sci. 26 (1981), pp. 123–403.
   Web of Science ®Google Scholar
• Y. Minonishi, S. Morozumi and H. Yoshinaga, Accomodation around {10-11} twins in titanium. Scr. Metall 19 (1985), pp. 1241–1245.
   Google Scholar
• T. Xiaoli, G. Haicheng, Z. Shufen and C. Laird, Loading mode dependence of deformation microstructure in a high-purity titanium single crystal oriented for difficult glide. Mater. Sci. Eng. A 189 (1994), pp. 77–84.
   Web of Science ®Google Scholar
• D.R. Chichili, K.T. Ramesh and K.J. Hemker, The high-strain-rate response of alpha-titanium: experiments, deformation mechanisms and modeling. Acta Mater. 46 (1998), pp. 1025–1043.
   Web of Science ®Google Scholar
• S. Nemat-Nasser, W.G. Guo and J.Y. Cheng, Mechanical properties and deformation mechanisms of a commercially pure titanium. Acta Mater. 47 (1999), pp. 3705–3720.
   Web of Science ®Google Scholar
• T.R. Cass, Slip modes and dislocation substructures in titanium and titanium-aluminium single crystals, in Sci. Technol. Appl. Titan., R. Jaffee, N. Promisel, eds., Pergamon Press, 1968. pp. 459–477.
   Google Scholar
• N.E. Paton and W.A. Backofen, Plastic deformation of titanium at elevated temperatures. Metall. Trans. 1 (1970), pp. 2839–2847.
   Web of Science ®Google Scholar
• Z. Zeng, Y. Zhang and S. Jonsson, Microstructure and texture evolution of commercial pure titanium deformed at elevated temperatures. Mater. Sci. Eng. A 513-514 (2009), pp. 83–90.
   Web of Science ®Google Scholar
• S. Suwas, B. Beausir, L.S. Tóth, J.J. Fundenberger and G. Gottstein, Texture evolution in commercially pure titanium after warm equal channel angular extrusion. Acta Mater. 59 (2011), pp. 1121–1133.
   Web of Science ®Google Scholar
• A.A. Salem, S.R. Kalidindi and R.D. Doherty, Strain hardening of titanium: role of deformation twinning. Acta Mater. 51 (2003), pp. 4225–4237.
   Web of Science ®Google Scholar
• Y.B. Chun, S.H. Yu, S.L. Semiatin and S.K. Hwang, Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium. Mater. Sci. Eng. A 398 (2005), pp. 209–219.
   Web of Science ®Google Scholar
• M. Preuss, J. Quinta Da Fonseca, V. Allen, D.G.L. Prakash and M.R. Daymond, Twinning in structural material with a hexagonal close-packed crystal structure. J. Strain Anal. Eng. Des 45 (2010), pp. 377–390.
   Web of Science ®Google Scholar
• L. Nervo, A. King, A. Fitzner, W. Ludwig and M. Preuss, A study of deformation twinning in a titanium alloy by X-ray diffraction contrast tomography. Acta Mater. 105 (2016), pp. 417–428.
   Web of Science ®Google Scholar
• Y. Zhong, F. Yin and K. Nagai, Role of deformation twin on texture evolution in cold-rolled commercial-purity Ti. J. Mater. Res. 23 (2008), pp. 2954–2966.
   Web of Science ®Google Scholar
• B.D. Bishoyi, R.K. Sabat and S.K. Sahoo, Effect of temperature on microstructure and texture evolutions during uniaxial compression of commercially pure titanium. Mater. Sci. Eng. A 718 (2018), pp. 398–411.
   Web of Science ®Google Scholar
• S. Wronski, M. Wierzbanowski, K. Jędrychowski, J. Tarasiuk, M. Wronski, A. Baczmanski and B. Bacroix, Microstructure evolution of titanium after tensile test. Mater. Sci. Eng. A 656 (2016), pp. 1–11.
   Web of Science ®Google Scholar
• A. Bhattacharyya, G. Ravichandran and D. Rittel, Strain rate effect on the evolution of deformation texture for α-Fe. Met. Mater. Trans. A 37 (2006), pp. 1137–1145.
   Google Scholar
• M.D. Nave and M.R. Barnett, Microstructures and textures of pure magnesium deformed in plane-strain compression. Scr. Mater. 51 (2004), pp. 881–885.
   Web of Science ®Google Scholar
• S.J. Lainé and K.M. Knowles, {11-24} deformation twinning in commercial purity titanium at room temperature. Philos. Mag. 95 (2015), pp. 2153–2166.
   Web of Science ®Google Scholar
• B.D. Bishoyi, R.K. Sabat, J. Sahu and S.K. Sahoo, Effect of temperature on microstructure and texture evolution during uniaxial tension of commercially pure titanium. Mater. Sci. Eng. A 703 (2017), pp. 399–412.
   Web of Science ®Google Scholar
• J. Gil Sevillano, P. Van Houtte and E. Aernoudt, Large strain work hardening and textures, progress. Mater. Sci. 25 (1981), pp. 69–134.
   Web of Science ®Google Scholar
• S.C. Shrivastava, J.J. Jonas and G. Canova, Equivalent strain in large deformation torsion testing: theoretical and practical considerations. J. Mech. Phys. Solids 30 (1982), pp. 75–90.
   Web of Science ®Google Scholar
• M.R. Barnett and F. Montheillet, The generation of new high-angle boundaries in aluminium during hot torsion. Acta. Mater 50 (2002), pp. 2285–2296.
   Web of Science ®Google Scholar
• T. Pettersen and E. Nes, On the origin of strain softening during deformation of aluminum in torsion to large strains. Met. Mater. Trans. A 34 (2003), pp. 2727–2736.
   Google Scholar
• E. Cakmak, H. Choo, K. An and Y. Ren, A synchrotron X-ray diffraction study on the phase transformation kinetics and texture evolution of a TRIP steel subjected to torsional loading. Acta. Mater. 60 (2012), pp. 6703–6713.
   Web of Science ®Google Scholar
• S. Biswas, B. Beausir, L.S. Toth and S. Suwas, Evolution of texture and microstructure during hot torsion of a magnesium alloy. Acta Mater. 61 (2013), pp. 5263–5277.
   Web of Science ®Google Scholar
• N.P. Gurao and S. Suwas, Deformation behaviour of titanium in torsion. Mater. Sci. Forum. 702 (2012), pp. 826–829.
   Google Scholar
• P. Sanchez, A. Pochettino, T. Chauveau and B. Bacroix, Torsion texture development of zirconium alloys. J. Nucl. Mater. 298 (2001), pp. 329–339.
   Web of Science ®Google Scholar
• ASTM E 2627-10. Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials 2010., in: ASTM Int., West Conshohocken PA, 2010.
   Google Scholar
• O. Engler and V. Randle, Introduction to Texture Analysis, CRC Press, Taylor and Francis group, 2010. pp 271.
   Google Scholar
• T.A. Mason, J.F. Bingert, G.C. Kaschner, S.I. Wright and R.J. Larsen, Advances in deformation twin characterization using electron backscattered diffraction data. Met. Mater. Trans. A 33 (2002), pp. 949–954.
   Web of Science ®Google Scholar
• G.I. Taylor, Plastic strain in metals. J. Inst. Met 62 (1938), pp. 307–324.
   Google Scholar
• S. Panda, S.K. Sahoo, A. Dash, M. Bagwan, G. Kumar, S.C. Mishra and S. Suwas, Orientation dependent mechanical properties of commercially pure (cp) titanium. Mater. Charact 98 (2014), pp. 93–101.
   Web of Science ®Google Scholar
• I.J. Beyerlein, L. Capolungo, P.E. Marshall, R.J. McCabe and C.N. Tomé, Statistical analyses of deformation twinning in magnesium. Philos. Mag. 90(16) (2010), pp. 2161–2190.
   Web of Science ®Google Scholar
• M. Arul Kumar, B. Clausen, L. Capolungo, R.J. McCabe, W. Liu, J.Z. Tischler and C.N. Tomé, Deformation twinning and grain partitioning in a hexagonal close-packed magnesium alloy. Nat. Commun. 9(4761) (2018), pp. 1–8.
   PubMedGoogle Scholar
• S.K. Sahoo, V.D. Hiwarkar, I. Samajdar, P. Pant, G.K. Dey, D. Srivastav, R. Tewari and S. Banerjee, Deformation twinning in zircaloy 2. Mater. Sci. Technol. 26(1) (2010), pp. 104–114.
   Web of Science ®Google Scholar
• R.K. Sabat, S.K. Sahoo, D. Panda, U.K. Mohanty and S. Suwas, Orientation dependent recrystallization mechanism during static annealing of pure magnesium. Mater. Charact. 132 (2017), pp. 388–396.
   Web of Science ®Google Scholar
• P. Bhagat Singh, R.K. Sabat, S. Kumaran and S. Suwas, Effect of aluminum addition on the evolution of microstructure, crystallographic texture and mechanical properties of single phase hexagonal close packed Mg-Li alloys. J. Mater. Eng. Perform. 27 (2018), pp. 864–874.
   Google Scholar
• S.K. Sahoo, R.K. Sabat, B.D. Bishoyi, A.G.S. Anjani and S. Suwas, Effect of strain-paths on mechanical properties of hot rolled commercially pure titanium. Mater. Lett. 180 (2016), pp. 166–169.
   Web of Science ®Google Scholar
• S.K. Sahoo, R.K. Sabat, S. Sahni and S. Suwas, Texture and microstructure evolution of commercially pure titanium during hot rolling: role of strain-paths. Mater. Des. 91 (2016), pp. 58–71.
   Web of Science ®Google Scholar
• S.K. Sahoo, R.K. Sabat, S. Panda, S.C. Mishra and S. Suwas, Mechanical property of pure magnesium: from orientation perspective pertaining to deviation from basal orientation. J. Mater. Eng. Perform. 24 (2015), pp. 2346–2353.
   Web of Science ®Google Scholar
• R.K. Mishra, A. Brahme, R.K. Sabat, L. Jin and K. Inal, Twinning and texture randomization in Mg and Mg-Ce alloys. Int. J. Plast. 117 (2019), pp. 157–172.
   Web of Science ®Google Scholar
• R.K. Sabat, D.S. Surya Pavan, M.V.S.S.D.S. Aakash, M. Kumar and S.K. Sahoo, Mechanism of texture and microstructure evolution during warm rolling of Ti–6Al–4V alloy. Philos. Mag. 98 (2018), pp. 2562–2581.
   Web of Science ®Google Scholar
• M. Knezevic, A. Levinson, R. Harris, R.K. Mishra, R.D. Doherty and S.R. Kalidindi, Deformation twinning in AZ31: influence on strain hardening and texture evolution. Acta Mater. 58 (2010), pp. 6230–6242.
   Web of Science ®Google Scholar
• S.K. Sahoo, R.K. Sabat, S. Panda, S.C. Mishra and S. Suwas, Texture and microstructure evolution of pure zinc during rolling at liquid nitrogen temperature and subsequent annealing. Mater. Charact. 123 (2017), pp. 218–226.
   Web of Science ®Google Scholar
• S.K. Sahoo, S. Panda, R.K. Sabat, G. Kumar, S.C. Mishra, U.K. Mohanty and S. Suwas, Effect of pre-annealing strains on annealing texture developments in commercially pure (CP) titanium. Philos. Mag. 95 (2015), pp. 1105–1124.
   Web of Science ®Google Scholar
• R.K. Sabat, S.K. Sahoo, B.D. Bishoyi, N. Bibhanshu and S. Suwas, Improvement in mechanical properties of commercially pure titanium through reverse rolling. Philos. Mag. Lett. 97 (2017), pp. 273–279.
   Web of Science ®Google Scholar
• J. Geng, M.F. Chisholm, R.K. Mishra and K.S. Kumar, An electron microscopy study of dislocation structures in Mg single crystals compressed along [0001] at room temperature. Philos. Mag. 95 (2015), pp. 3910–3932.
   Web of Science ®Google Scholar
• R.K. Sabat, A.P. Brahme, R.K. Mishra, K. Inal and S. Suwas, Ductility enhancement in Mg-0.2%Ce alloys. Acta Mater. 161 (2018), pp. 246–257.
   Web of Science ®Google Scholar
• R. Vinjamuri, B.D. Bishoyi, R.K. Sabat, M. Kumar, and S.K. Sahoo, Microstructure, texture, mean free path of dislocations and mechanical properties of Ti–6Al–4V alloy during uniaxial compression at elevated temperatures. Mater. Sci. Eng. A. 776 (2020), 139042.
   Web of Science ®Google Scholar
• S. Sankaranarayanan, R.K. Sabat, Jayalakshmi S., S. Walker, S. Suwas and M. Gupta, Using heat treatment effects and EBSD analysis to tailor microstructure of hybrid Mg nanocomposite for enhanced overall mechanical response. Mater. Sci. Technol. 30 (2014), pp. 1309–1320.
   Web of Science ®Google Scholar
• M.K. Debta, B.D. Bishoyi, R.K. Sabat, W. Muhammad and S.K. Sahoo, Microstructure and texture evolution during annealing of Ti–6Al–4V alloy. Mater. Sci. Technol 36 (2020), pp. 417–424.
   Web of Science ®Google Scholar
• G. Lütjering, J.C. Williams and A. Gysler, Microstructure and mechanical properties of titanium alloys. Microstruct. Prop. Mater 2 (2000), pp. 1–77.
   Google Scholar
• B. Beausir, L.S. Tóth, F. Qods and K.W. Neale, Texture and mechanical behavior of magnesium during free-end torsion. J. Eng. Mater. Technol. 131 (2009), pp. 0111081–0111085.
   Web of Science ®Google Scholar