References
- W.D. Cai, Y. Li, R.J. Dowding, F.A. Mohamed and E.J. Lavernia, A review of tungsten based alloys as kinetic energy penetrator materials. Rev. Part. Mater 3 (1995), pp. 71–132.
- A. Bose and R.M. German, Sintering atmosphere effects on tensile properties of heavy alloys. Metall. Trans. A 19 (1988), pp. 2467–2476.
- D.V. Edmonds and P.N. Jones, Interfacial embrittlement in liquid-phase sintered tungsten heavy alloys. Metall. Trans. A 10 (1979), pp. 289–295.
- B. Katavic, M. Nikacevic and Z. Odanovic, Effect of cold swaging and heat treatment on properties of the P/M 91W-6Ni-3Co heavy alloys. Sci. Sinter 40 (2008), pp. 319–331.
- S.G. Caldwell, Powder Metal Technologies and Applications. ASM Handbook 7, Materials Park, Ohio, ASM International, 1998. pp. 914–921.
- Noh Joon-Woong, Kim Eun-Pyo, Song Heung-SUB, Baek Woon-Hyung, Churn Kil-Sung, Kang Suk-Joong L., Matrix penetration of W/W grain boundaries and its effect on mechanical properties of 93W-5.6Ni-1.4Fe heavy alloy. Metall. Trans 24 (1993), pp. 2411–2416.
- C. Lea, B.C. Muddle and D.V. Edmonds, Segregation to interphase boundaries in liquid-phase sintered tungsten alloys. Metall Trans. 14 (1983), pp. 667–677.
- H.K. Yoon, S.H. Lee, S.J.L. Kang and D.N. Yoon, Effect of vacuum-treatment on mechanical properties of W-Ni-Fe heavy alloy. J. Mater. Sci 18 (1983), pp. 1374–1380.
- M. Li, D. Ruprecht, G. Kracker, T. Hoschen and R. Neu, Impact of heat treatment on tensile properties of 97W 2Ni 1Fe heavy alloy. J. Nucl. Mater 512 (2018), pp. 1–7.
- A. Panchal and T.K. Nandy, Effect of composition, heat treatment and deformation on mechanical properties of tungsten heavy alloys. Mater. Sci. Eng. A 733 (2018), pp. 374–384.
- P. Stuitje, R. Harkema, and C. Taal, Heavy metal alloy and method for its production. US Patent No. 5462576, 1995.
- A. Kumari, G. Prabhu, M. Sankaranarayana and T.K. Nandy, Effect of solution treatment temperature and cooling rate on the mechanical properties of tungsten heavy alloy. Mater. Sci. Eng. A 688 (2017), pp. 225–236.
- R. Sarkar, V. Singh, S. Kumar, Y. Venkateswara Rao, P. Ghosal and T.K. Nandy, Structure and orientation of an intermetallic phase in a W-Ni-Co alloy. Phil. Mag 99 (2019), pp. 1240–1258.
- G. Prabhu, R. Arockia Kumar and T.K. Nandy, Effect of cyclic heat treatment on the microstructure and mechanical properties of W-Ni-Co alloys. Int. J. Refract. Met. Hard. Mater. 82 (2019), pp. 31–42.
- R.M. German, J.E. Hanafee and S.L. DiGiallonardo, Toughness variation with test temperature and cooling rate for liquid phase sintered W-3.5Ni-1.5Fe. Metall. Trans. A 15 (1984), pp. 121–128.
- R.M. German, P. Suri and S.J. Park, Review: liquid phase sintering. J. Mater. Sci. 44 (2009), pp. 1–39.
- R. Kocich, L. Kunčická, D. Dohnalík, A. Macháčková and M. Šofer, Cold rotary swaging of a tungsten heavy alloy: numerical and experimental investigations. Int. J. Refract. Met. Hard Mater. 61 (2016), pp. 264–272.
- P.B. Kemp and R. German, Mechanical properties of molybdenum alloyed liquid phase-sintered tungsten-based composites. Metall. Mater. Trans. A 26 (1995), pp. 2187–2189.
- A. Panchal, K.V. Reddy, P.A. Azeem, R. Sarkar, A. Paradkar, T.K. Nandy and A.K. Singh, Effect of Ni/Fe ratio on microstructure, tensile flow and work hardening behaviour of tungsten heavy alloys in heat treated and swaged condition. Phil. Mag. 101(2) (2020), pp. 1–31.
- R. Cury, F. Issartel, J.-M. Joubert and H. Couque, Evolution of cobalt-free tungsten heavy alloys for kinetic energy penetrators. Powder Metall. 56 (2013), pp. 347–350.
- S.J. Bless, K. Tarcza, R. Chau, E. Taleff and C. Persada, Dynamic fracture of tungsten heavy alloys. Int. J. Imp. Eng 33 (2006), pp. 100–108.
- B. Katavić, Z. Odanović and M. Burzić, Investigation of the rotary swaging and heat treatment on the behavior of W and γ-phases in PM 92.5W–5Ni–2.5Fe–0.26Co heavy alloy. Mater. Sci. Eng. A 492 (2008), pp. 337–345.
- A.K. Gogia, D. Banerjee and T.K. Nandy, Structure, tensile deformation and fracture of a Ti3Al-Nb alloy. Metall. Trans. A 21 (1990), pp. 609–625.