Clustering of Si–Ni in cementite in 18MND5 steel weldment

References

• G. Miyamoto, H. Usuki, Z.D. Li and T. Furuhara, Effects of Mn, Si and Cr addition on reverse transformation at 1073 K from spheroidized cementite structure in Fe-0.6 mass% C alloy. Acta. Mater. 58 (2010), pp. 4492–4502.
   Web of Science ®Google Scholar
• F.G. Caballero, M.K. Miller, C. Garcia-Mateo, C. Capdevila and S.S. Babu, Redistribution of alloying elements during tempering of a nanocrystalline steel. Acta. Mater. 56 (2008), pp. 188–199.
   Web of Science ®Google Scholar
• G. Miyamoto, J.C. Oh, K. Hono, T. Furuhara and T. Maki, Effect of partitioning of Mn and Si on the growth kinetics of cementite in tempered Fe-0.6 mass% C martensite. Acta. Mater. 55 (2007), pp. 5027–5038.
   Web of Science ®Google Scholar
• C. Zhu, X.Y. Xiong, A. Cerezo, R. Hardwicke, G. Krauss and G.D.W. Smith, Three-dimensional atom probe characterization of alloy element partitioning in cementite during tempering of alloy steel. Ultramicroscopy 107 (2007), pp. 808–812.
   PubMed Web of Science ®Google Scholar
• G. Ghosh and G.B. Olson, Precipitation of paraequilibrium cementite: experiments, and thermodynamic and kinetic modeling. Acta. Mater. 50 (2002), pp. 2099–2119.
   Web of Science ®Google Scholar
• S.S. Babu, K. Hono and T. Sakurai, APFIM studies on martensite tempering of Fe-C-Si-Mn low alloy steel. Appl. Surf. Sci. 67 (1993), pp. 321–327.
   Web of Science ®Google Scholar
• A. Hultgren, Isothermal transformation of austenite. Trans. Am. Soc. Met. 39 (1947), pp. 915–1005.
   Google Scholar
• J.S. Kirkaldy, Diffusion in multicomponent metallic systems: II. solutions for two-phase systems with applications to transformations in steel. Can. J. Phys. 36 (1958), pp. 907–916.
   Web of Science ®Google Scholar
• D.E. Coates, Diffusional growth limitation and hardenability. Metall. Trans. 4 (1973), pp. 2313–2325.
   Web of Science ®Google Scholar
• R.C. Thomson and M.K. Miller, The partitioning of substitutional solute elements during the tempering of martensite in Cr and Mo containing steels. Appl. Surf. Sci. 87/88 (1995), pp. 185–193.
   Web of Science ®Google Scholar
• R.C. Thomson and M.K. Miller, Carbide precipitation in martensite during the early stages of tempering Cr- and Mo-containing low alloy steels. Acta. Mater. 46 (1998), pp. 2203–2213.
   Web of Science ®Google Scholar
• L. Chang and G.D.W. Smith, The silicon effect in the tempering of martensite in steels. J. Phys. 45 (1984), pp. C9-397–C9-401.
   Google Scholar
• Y.R. Im, Y.J. Oh, B.J. Lee, J.H. Hong and H.C. Lee, Effects of carbide precipitation on the strength and charpy impact properties of low carbon Mn-Ni-Mo bainitic steels. J. Nucl. Mater. 297 (2001), pp. 138–148.
   Web of Science ®Google Scholar
• S. Lee, S. Kim, B. Hwang, B.S. Lee and C.G. Lee, Effect of carbide distribution on the fracture toughness in the transition temperature region of an SA 508 steel. Acta. Mater. 50 (2002), pp. 4755–4762.
   Web of Science ®Google Scholar
• J. Takahashi, K. Kawakami and Y. Kobayashi, Quantitative analysis of carbon content in cementite in steel by atom probe tomography. Ultramicroscopy 111 (2011), pp. 1233–1238.
   PubMed Web of Science ®Google Scholar
• J.T. Sebastian, D. Isheim and D.N. Seidman, Atom-probe analyses of carbide-containing steels—comparison of laser- and voltage-pulsed results. Microsc. Microanal. 12 (2006), pp. 1744–1745.
   Google Scholar
• O. Hellman, J. Vandenbroucke, J.B. Rivage and D.N. Seidman, Application software for data analysis for three-dimensional atom probe microscopy. Mater. Sci. Eng. A 327 (2002), pp. 29–33.
   Google Scholar
• Y.J. Li, P. Choi, S. Goto, C. Borchers, D. Raabe and R. Kirchheim, Atomic scale investigation of redistribution of alloying elements in pearlitic steel wires upon cold-drawing and annealing. Ultramicroscopy 132 (2013), pp. 233–238.
   PubMed Web of Science ®Google Scholar
• D.E. Coates, Diffusion-controlled precipitate growth in ternary systems I. Metall. Trans. 3 (1972), pp. 1203–1212.
   Web of Science ®Google Scholar
• P. Auger, P. Pareige, M. Akamatsu and D. Blavette, APFIM investigation of clustering in neutron-irradiated Fe-Cu alloys and pressure vessel steels. J. Nucl. Mater. 225 (1995), pp. 225–230.
   Web of Science ®Google Scholar
• M.K. Miller, A.A. Chernobaeva, Y.I. Shtrombakh, K.F. Russell, D.Y. Erak and O.O. Zabusov, Evolution of the nanostructure of VVER-1000 RPV materials under neutron irradiation and post irradiation annealing. J. Nucl. Mater. 385 (2009), pp. 615–622.
   Web of Science ®Google Scholar
• J.M. Hyde, G. Sha, E.A. Marquis, A. Morley, K.B. Wilford and T.J. Williams, A comparison of the structure of solute clusters formed during thermal ageing and irradiation. Ultramicroscopy 111 (2011), pp. 664–671.
   PubMed Web of Science ®Google Scholar
• M.K. Miller, K.F. Russell, M.A. Sokolov and R.K. Nanstad, APT characterization of irradiated high nickel RPV steels. J. Nucl. Mater. 361 (2007), pp. 248–261.
   Web of Science ®Google Scholar