References
- S. Arora and C. Srivastava, Microstructure and corrosion properties of NiCo-ger,mm graphene oxide composite coatings. Thin Solid Films 677 (2019), pp. 45–54. doi: https://doi.org/10.1016/j.tsf.2019.03.011.
- T. Souza, D. Lago and L. Senna, Electrodeposition of Co-rich Cu–Co alloys from sodium tartrate baths using direct (DC) and single pulsed current (SPC). Mater. Res. 22 (2019), pp. 3. doi: https://doi.org/10.1590/1980-5373-mr-2018-0272.
- S. Rashmi, L. Elias and A. Chitharanjan Hegde, Multilayered Zn–Ni alloy coatings for better corrosion protection of mild steel. Eng. Sci. Technol. Int. J. 20(3) (2017), pp. 1227–1232. doi: https://doi.org/10.1016/j.jestch.2016.10.005.
- C. Carpenter, P. Shipway and Y. Zhu, Electrodeposition of nickel–carbon nanotube nanocomposite coatings for enhanced wear resistance. Wear 271(9–10) (2011), pp. 2100–2105. doi: https://doi.org/10.1016/j.wear.2011.01.068.
- S. Sadreddini and A. Afshar, Corrosion resistance enhancement of Ni–P–nano SiO2 composite coatings on aluminum. Appl. Surf. Sci. 303 (2014), pp. 125–130. doi: https://doi.org/10.1016/j.apsusc.2014.02.109.
- S. Ranganatha, T. Venkatesha and K. Vathsala, Development of electroless Ni–Zn–P/nano-TiO2 composite coatings and their properties. Appl. Surf. Sci. 256(24) (2010), pp. 7377–7383. doi: https://doi.org/10.1016/j.apsusc.2010.05.076.
- P. Xu, C. Lin, C. Zhou and X. Yi, Wear and corrosion resistance of laser cladding AISI 304 stainless steel/Al2O3 composite coatings. Surf. Coat. Technol. 238 (2014), pp. 9–14. doi: https://doi.org/10.1016/j.surfcoat.2013.10.028.
- M. Tabish, M. Malik, M. Khan, G. Yasin, H. Asif, M. Anjum, et al., Construction of NiCo/graphene nanocomposite coating with bulges-like morphology for enhanced mechanical properties and corrosion resistance performance. J. Alloys Compd. 867 (2021), pp. 159138. doi: https://doi.org/10.1016/j.jallcom.2021.159138.
- G. Yasin, M. Anjum, M. Malik, M. Khan, W. Khan, M. Arif, et al. Revealing the erosion-corrosion performance of sphere-shaped morphology of nickel matrix nanocomposite strengthened with reduced graphene oxide nanoplatelets, 2021.
- G. Yasin, M. Arif, M. Shakeel, Y. Dun, Y. Zuo, W. Khan, et al., Exploring the nickel–graphene nanocomposite coatings for superior corrosion resistance: manipulating the effect of deposition current density on its morphology, mechanical properties, and erosion-corrosion performance. Adv. Eng. Mater. 20(7) (2018), pp. 1701166. doi: https://doi.org/10.1002/adem.201701166.
- G. Yasin, M. Khan, M. Arif, M. Shakeel, T. Hassan, W. Khan, et al., Synthesis of spheres-like Ni/graphene nanocomposite as an efficient anti-corrosive coating; effect of graphene content on its morphology and mechanical properties. J. Alloys Compd. 755 (2018), pp. 79–88. doi: https://doi.org/10.1016/j.jallcom.2018.04.321.
- G. Yasin, M. Arif, T. Mehtab, M. Shakeel, M. Khan and W. Khan. Metallic nanocomposite coatings, 2021.
- G. Yasin, M. Arif, M. Nizam, M. Shakeel, M. Khan, W. Khan, et al., Effect of surfactant concentration in electrolyte on the fabrication and properties of nickel-graphene nanocomposite coating synthesized by electrochemical co-deposition. RSC Adv. 8(36) (2018), pp. 20039–20047.
- A. Jabbar, G. Yasin, W. Khan, M. Anwar, R. Korai, M. Nizam and G. Muhyodin, Electrochemical deposition of nickel graphene composite coatings: effect of deposition temperature on its surface morphology and corrosion resistance. RSC Adv. 7(49) (2017), pp. 31100–31109. doi: https://doi.org/10.1039/c6ra28755g.
- M. Malik, M. Tabish, G. Yasin, M. Anjum, S. Jameel, Y. Tang, et al., Electroless codeposition of GO incorporated silane nanocomposite coating onto AZ91 Mg alloy: effect of GO content on its morphology, mechanical and corrosion protection properties. J. Alloys Compd. 883 (2021), pp. 160790). doi: https://doi.org/10.1016/j.jallcom.2021.160790.
- G. Yang, L. Li, W. Lee and M. Ng, Structure of graphene and its disorders: a review. Sci. Technol. Adv. Mater. 19(1) (2018), pp. 613–648. doi: https://doi.org/10.1080/14686996.2018.1494493.
- S. Böhm, Graphene against corrosion. Nat. Nanotechnol. 9(10) (2014), pp. 741–742. doi:https://doi.org/10.1038/nnano.2014.220.
- N.T. Kirkland, T. Schiller, N. Medhekar and N. Birbilis, Exploring graphene as a corrosion protection barrier. Corros. Sci. 56 (2012), pp. 1–4. doi:https://doi.org/10.1016/j.corsci.2011.12.003.
- V. Srimaneepong, D. Rokaya, P. Thunyakitpisal, J. Qin and K. Saengkiettiyut, Corrosion resistance of graphene oxide/silver coatings on Ni–Ti alloy and expression of IL-6 and IL-8 in human oral fibroblasts. Sci. Rep. 10(1) (2020). doi: https://doi.org/10.1038/s41598-020-60070-x.
- G. Jena, B. Anandkumar, S. Vanithakumari, R. George, J. Philip and G. Amarendra, Graphene oxide–chitosan–silver composite coating on Cu–Ni alloy with enhanced anticorrosive and antibacterial properties suitable for marine applications. Prog. Org. Coat. 139 (2020), pp. 105444. doi: https://doi.org/10.1016/j.porgcoat.2019.105444.
- M. Aghili, M. Yazdi, Z. Ranjbar and S. Jafari, Anticorrosion performance of electro-deposited epoxy/ amine functionalized graphene oxide nanocomposite coatings. Corros. Sci. 179 (2021), pp. 109143. doi: https://doi.org/10.1016/j.corsci.2020.109143.
- D. Cohen-Tanugi and J. Grossman, Mechanical strength of nanoporous graphene as a desalination membrane. Nano Lett. 14(11) (2014), pp. 6171–6178. doi: https://doi.org/10.1021/nl502399y.
- N. Othman, M. Che Ismail, M. Mustapha, N. Sallih, K. Kee and R. Ahmad Jaal, Graphene-based polymer nanocomposites as barrier coatings for corrosion protection. Prog. Org. Coat. 135 (2019), pp. 82–99. doi: https://doi.org/10.1016/j.porgcoat.2019.05.030.
- M. Punith Kumar, M. Singh and C. Srivastava, Electrochemical behavior of Zn–graphene composite coatings. RSC Adv. 5(32) (2015), pp. 25603–25608. doi: https://doi.org/10.1039/c5ra02898a.
- M.Y. Rekha, M. Punith Kumar and C. Srivastava, Electrochemical behaviour of chromium–graphene composite coating. RSC Adv. 6(67) (2016), pp. 62083–62090. doi: https://doi.org/10.1039/c6ra06509k.
- R. Seki, H. Takamatsu, Y. Suzuki, Y. Oya and T. Ohba, Hydrophobic-to-hydrophilic affinity change of sub-monolayer water molecules at water–graphene interfaces. Colloids Surf. A 628 (2021), pp. 127393. doi: https://doi.org/10.1016/j.colsurfa.2021.127393.
- Y. Su, V. Kravets, S. Wong, et al., Impermeable barrier films and protective coatings based on reduced graphene oxide. Nat. Commun. 5(2014), pp. 4843.
- S. Lala, K. Jyotheender, A. Gupta, S. Arora, M.K. P and C. Srivastava, Evolution of texture and strain in Sn coating with Cr addition and its effect on the coating corrosion behavior. Materialia 14 (2020), pp. 100944. doi: https://doi.org/10.1016/j.mtla.2020.100944.
- D.C. Marcano, D.V. Kosynkin, J.M. Berlin, A. Sinitskii, Z. Sun, A. Slesarev, L.B. Alemany, W. Lu and J.M. Tour, Improved synthesis of graphene oxide. ACS Nano 4 (2010), pp. 4806–4814.
- D. Gu and J. Fein, Adsorption of metals onto graphene oxide: surface complexation modeling and linear free energy relationships. Colloids Surf. A: Physicochem. Eng. Aspects 481 (2015), pp. 319–327. doi: https://doi.org/10.1016/j.colsurfa.2015.05.026.
- J. Zhang, Z. Jin, W. Li, W. Dong and A. Lu, Graphene modified carbon nanosheets for electrochemical detection of Pb(ii) in water. J. Mater. Chem. A 1(42) (2013), pp. 13139. doi: https://doi.org/10.1039/c3ta12612a.
- W. Liu, Q. Xu, J. Han, X. Chen and Y. Min, A novel combination approach for the preparation of superhydrophobic surface on copper and the consequent corrosion resistance. Corros. Sci. 110 (2016), pp. 105–113. doi: https://doi.org/10.1016/j.corsci.2016.04.015.
- K. Awasthi, D. Singh, S. Singh, D. Dash and O. Srivastava, Attachment of biomolecules (protein and DNA) to amino-functionalized carbon nanotubes. New Carbon Mater. 24(4) (2009), pp. 301–306. doi: https://doi.org/10.1016/s1872-5805(08)60053-0.
- Y. Zhou and M. Rahaman, Hydrothermal synthesis and sintering of ultrafine CeO2 powders. J. Mater. Res. 8(7) (1993), pp. 1680–1686. doi: https://doi.org/10.1557/jmr.1993.1680.
- D. Liu, J. Cheng and H. Ling, Electrochemical behaviours of (NiCoFeCrCu)95B5high entropy alloy coatings. Mater. Sci. Technol. 31(10) (2014), pp. 1159–1164. doi: https://doi.org/10.1179/1743284714y.0000000739.
- D.C. Marcano, D.V. Kosynkin, J.M. Berlin, A. Sinitskii, Z. Sun, A. Slesarev, L.B. lemany, W. Lu and J.M. Tour. Improved synthesis of graphene oxide.
- S. Gurunathan, J.W. Han, V. Eppakayala and J.H. Kim, Microbial reduction of graphene oxide by escherichia coli: a Green chemistry approach. Colloids Surf. B Biointerfaces 102 (2013), pp. 772–777.
- A. Bokuniaeva and A. Vorokh, Estimation of particle size using the debye equation and the Scherrer formula for polyphasic TiO2 powder. J. Phys: Conf. Ser. 1410 (2019), pp. 012057. doi: https://doi.org/10.1088/1742-6596/1410/1/012057.
- L. Benea and E. Danaila, Nucleation and growth mechanism of Ni/TiO2 nanoparticles electro-codeposition. J. Electrochem. Soc. 163(13) (2016), pp. D655–D662. doi: https://doi.org/10.1149/2.0591613jes.
- Z. Qin, Q. Zhang, Q. Luo, Z. Wu, B. Shen, L. Liu and W. Hu, Microstructure design to improve the corrosion and cavitation corrosion resistance of a nickel-aluminum bronze. Corros. Sci. 139 (2018), pp. 255–266. doi: https://doi.org/10.1016/j.corsci.2018.04.043.
- Y. Zou, J. Wang and Y.Y. Zheng, Electrochemical techniques for determining corrosion rate of rusted steel in seawater. Corros. Sci. 53 (2011), pp. 208–216.
- M.Y. Rekha and C. Srivastava, Microstructural evolution and corrosion behavior of ZnNi–graphene oxide composite coatings. Metall. Mater. Trans. A 50 (2019), pp. 5896–5913.
- K. Jyotheender and C. Srivastava, Correlating the five-parameter grain boundary character distribution and corrosion behavior of zinc-carbon nanotube composite coatings. Metall. Mater. Trans. A 52(1) (2020), pp. 364–377. doi: https://doi.org/10.1007/s11661-020-06070-y.
- M. Sellers, A. Schultz, C. Basaran and D. Kofke, Atomistic modeling of β-Sn surface energies and adatom diffusivity. Appl. Surf. Sci. 256(13) (2010), pp. 4402–4407. doi: https://doi.org/10.1016/j.apsusc.2010.02.038.
- S. Wright, M. Nowell, S. Lindeman, P. Camus, M. De Graef and M. Jackson, Introduction and comparison of new EBSD post-processing methodologies. Ultramicroscopy 159 (2015), pp. 81–94. doi: https://doi.org/10.1016/j.ultramic.2015.08.001.