Role of temperature and precipitates on the evolution of microstructure and texture during grain growth of Mg–3Al–0.2Ce alloy

References

• L.G. Wang and N. Zhang, Sustainable development of China’s commercial vehicles. Adv. Manuf. 3 (2015), pp. 37–41.
   Google Scholar
• B.L. Mordike and T. Ebert, Magnesium: properties-applications-potential. Mater. Sci. Eng. A 302 (2001), pp. 37–45.
   Web of Science ®Google Scholar
• H. Friedrich and B. Mordike, Magnesium Technology: Metallurgy, Design Data, Applications, Springer, Berlin, 2006.
   Google Scholar
• A.A. Luo, Magnesium casting technology for structural applications. J. Magnesium Alloys 1 (2013), pp. 2–22.
   Google Scholar
• Y.N. Wang and J.C. Huang, Texture analysis in hexagonal materials. Mater. Chem. Phys. 81 (2003), pp. 11–26.
   Web of Science ®Google Scholar
• M.H. Yoo, J.R. Morris, K.M. Ho and S.R. Agnew, Nonbasal deformation modes of HCP metals and alloys: role of dislocation source and mobility. Metall. Mater. Trans. A. 33 (2002), pp. 813–822.
   Web of Science ®Google Scholar
• F. Kaiser, D. Letzig, J. Bohlen, A. Styczynski, C. Hartig and K.U. Kainer, Anisotropic properties of magnesium sheet AZ31. Mater. Sci. Forum 419–422 (2003), pp. 315–320.
   Google Scholar
• J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama and K. Higashi, The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys. Acta Mater. 51 (2003), pp. 2055–2065.
   Web of Science ®Google Scholar
• X. Hua, F. Lv, H. Qiao, P. Zhang, Q.Q. Duan, Q. Wang, P.D. Wu, S.X. Li and Z.F. Zhang, The anisotropy and diverse mechanical properties of rolled Mg-3%Al-1%Zn alloy. Mater. Sci. Eng. A 618 (2014), pp. 523–532.
   Google Scholar
• K.H. Kim, J.H. Hwang, H.S. Jang, J.B. Jeon, N.J. Kim and B.J. Lee, Dislocation binding as an origin for the improvement of room temperature ductility in Mg alloys. Mater. Sci. Eng. A 715 (2018), pp. 266–275.
   Google Scholar
• K.H. Kim, J.B. Jeon, N.J. Kim and B.J. Lee, Role of yttrium in activation of <c + a> slip in magnesium: an atomistic approach. Scr. Mater 108 (2015), pp. 104–108.
   Web of Science ®Google Scholar
• T. Obara, H. Yoshinga and S. Morozumi, {1122}〈1123〉 slip system in magnesium. Acta Metall. 21 (1973), pp. 845–853.
   Google Scholar
• H. Yoshinaga and R. Horiuchi, On the nonbasal slip in magnesium crystals. Trans. Jpn. Inst. Met. 5 (1964), pp. 14–21.
   Google Scholar
• J.F. Stohr and J.P. Poirier, Study in electron microscopy of pyramidal slip {112¯2} <112¯3> in magnesium. Philos. Mag. 25 (1972), pp. 1313–1329.
   Web of Science ®Google Scholar
• N.P. Gurao and S. Suwas, Evolution of crystallographic texture during deformation of submicron grain size titanium. J. Mater. Res. 26 (2011), pp. 523–532.
   Google Scholar
• G. Gottstein, Physical Foundation of Materials Science, SpringerVerlag, Berlin, 2006.
   Google Scholar
• M.H. Yoo, Slip, twinning, and fracture in hexagonal close-packed metals. Metall. Mater. Trans. A. 12A (1981), pp. 409–418.
   Web of Science ®Google Scholar
• S.R. Agnew, M.H. Yoo and C.N. Tome, Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y. Acta Mater. 49 (2001), pp. 4277–4289.
   Web of Science ®Google Scholar
• R.S. Busk, Lattice parameters of magnesium alloys. J. Metals Trans. AIME 188 (1950), pp. 1460–1464.
   Google Scholar
• E. Hehmann, E. Sommer and B. Predel, Extension of solid solubility in magnesium by rapid solidification. Mater. Sci. Eng. A 125 (1990), pp. 249–265.
   Web of Science ®Google Scholar
• S. Sandlöbes, M. Friák, J. Neugebauer and D. Raabe, Basal and non-basal dislocation slip in Mg–Y. Mater. Sci. Eng. A 576 (2013), pp. 61–68.
   Web of Science ®Google Scholar
• S. Tekumalla, S. Seetharaman, A. Almajid and M. Gupta, Mechanical properties of magnesium-rare earth alloy systems: A review. Metals 5 (2015), pp. 1–39.
   Web of Science ®Google Scholar
• T.A. Samman and X. Li, Sheet texture modification in magnesium-based alloys by selective rare earth alloying. Mater. Sci. Eng. A 528 (2011), pp. 3809–3822.
   Google Scholar
• J.C. McDonald, Tensile properties of rolled magnesium alloys-binary alloys with calcium, cerium, gallium, and thorium. Trans. AIME 138 (1941), pp. 179–182.
   Google Scholar
• R.K. Sabat, A.P. Brahme, R.K. Mishra, K. Inal and S. Suwas, Ductility enhancement in Mg-0.2% Ce alloys. Acta Mater. 161 (2018), pp. 246–257.
   Web of Science ®Google Scholar
• [26] J.F. King, Magnesium Alloys and their Applications. K.U. Kainer (Ed.), Wiley-VCH, New York, 2000, p. 15.
   Google Scholar
• A.A. Luo, Recent magnesium alloy development for elevated temperature applications. Int. Mater. Rev. 49 (2004), pp. 13–30.
   Web of Science ®Google Scholar
• D.J. Sakkinen. SAE Technical Paper 940779, SAE, Warrendale, PA, 1994, pp. 558–569.
   Google Scholar
• M.S. Dargusch, G.L. Dunlop, K. Petterson, B.L. Mordike and K.U. Kainer (Eds.), Magnesium Alloys and Their Applications. Werkstoff-Informationsgesellschaft, Frankfurt, Germany, 1998, p. 277.
   Google Scholar
• Y. Chino, M. Kado and M. Mabuchi, Compressive deformation behavior at room temperature- 773 K in Mg–0.2 mass % (0.035 at. %) Ce alloy. Acta Mater. 56 (2008), pp. 387–394.
   Web of Science ®Google Scholar
• Y. Chino, M. Kado and M. Mabuchi, Enhancement of tensile ductility and stretch formability of magnesium by addition of 0.2 wt. % (0.035 at. %) Ce. Mater. Sci. Eng. A 494 (2008), pp. 343–349.
   Web of Science ®Google Scholar
• J.C. McDonald, Anomalous behavior during cold working and subsequent heating of certain magnesium base alloys. Trans. Met. Soc. AIME 212 (1958), pp. 45–46.
   Google Scholar
• R.K. Mishra, A.K. Gupta, P.R. Rao, A.K. Sachdev, A.M. Kumar and A.A. Luo, Influence of cerium on the texture and ductility of magnesium extrusions. Scr. Mater 59 (2008), pp. 562–565.
   Web of Science ®Google Scholar
• J. Zhang, J. Wang, X. Qiu, D. Zhang, Z. Tian, X. Niu, D. Tang and J. Menga, Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg–4Al–based alloy. J. Alloys Compd. 464 (2008), pp. 556–564.
   Web of Science ®Google Scholar
• J. Wang, H. Dong, L. Wang, Y. Wu and L. Wang, Effect of hot rolling on the microstructure and mechanical properties of Mg–5Al–0.3Mn–2Nd alloy. J. Alloys Compd. 507 (2010), pp. 178–183.
   Web of Science ®Google Scholar
• B.H. Kim, K.C. Park, Y.H. Park and I.M. Park, Investigations of the properties of Mg–4Al–2Sn–1Ca–xCe alloys. Mater. Sci. Eng. A 527 (2010), pp. 6372–6377.
   Google Scholar
• J. Zhang, D. Zhang, Z. Tian, J. Wang, K. Liu, H. Lu, D. Tang and J. Meng, Microstructures, tensile properties and corrosion behavior of die-cast Mg–4Al-based alloys containing La and/or Ce. Mater. Sci. Eng. A 489 (2008), pp. 113–119.
   Google Scholar
• J.H. Zhang, M.L. Zhang, J. Meng, R.Z. Wu and D.X. Tang, Microstructures and mechanical properties of heat-resistant high-pressure die-cast Mg–4Al–xLa–0.3Mn (x = 1, 2, 4, 6) alloys. Mater. Sci. Eng. A 527 (2010), pp. 2527–2537.
   Google Scholar
• M.S. Dargusch, S.M. Zhu, J.F. Nie and G.L. Dunlop, Microstructural analysis of the improved creep resistance of a die-cast magnesium–aluminium–rare earth alloy by strontium additions. Scr. Mater. 60 (2009), pp. 116–119.
   Web of Science ®Google Scholar
• J. Zhang, Z. Leng, M. Zhang, J. Meng and R. Wu, Effect of Ce on microstructure, mechanical properties and corrosion behavior of high-pressure die-cast Mg–4Al-based alloy. J. Alloys Compd 509 (2011), pp. 1069–1078.
   Web of Science ®Google Scholar
• A.K. Chaubey, S. Scudino, K.G. Prashanth and J. Eckert, Microstructure and mechanical properties of Mg-Al based alloy modified with cerium. Mater. Sci. Eng. A 625 (2015), pp. 46–49.
   Google Scholar
• L. Jin, R.K. Mishra and A.K. Sachdev, Texture modification during extrusion of some Mg alloys. Metall. Mater. Trans. A 43A (2012), pp. 2148–2157.
   Google Scholar
• F.Z. Hassani, M. Ketabchi and M.T. Hassani, Effect of twins and non-basal planes activated by equal channel angular rolling process on properties of AZ31 magnesium alloy. J. Mater. Sci. 46 (2011), pp. 7689–7695.
   Google Scholar
• Y.Q. Cheng, Z.H. Chen, W.J. Xia and T. Zhou, Improvement of drawability at room temperature in AZ31 magnesium alloy sheets processed by equal channel angular rolling. J. Mater. Eng. Perform. 17 (2008), pp. 15–19.
   Google Scholar
• S.H. Kim, B.S. You, C.D. Yim and Y.M. Seo, Texture and microstructure changes in asymmetrically hot rolled AZ31 magnesium alloy sheets. Mater. Lett. 59 (2005), pp. 3876–3880.
   Web of Science ®Google Scholar
• K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yia and D. Letzig, Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets. Scr. Mater. 63 (2010), pp. 725–730.
   Web of Science ®Google Scholar
• S.R. Agnew, J.A. Horton, T.M. Lillo and D.W. Brown, Enhanced ductility in strongly textured magnesium produced by equal channel angular processing. Scr. Mater. 50 (2004), pp. 377–381.
   Web of Science ®Google Scholar
• W.J. Kim, S.I. Hong, Y.S. Kim, S.H. Min, H.T. Jeong and J.D. Lee, Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing. Acta Mater. 51 (2003), pp. 3293–3307.
   Web of Science ®Google Scholar
• M. Lentz, M. Risse, N. Schaefer, W. Reimers and I.J. Beyerlein, Strength and ductility with {10T1}-{10T2} double twinning in a magnesium alloy. Nat. Commun. 7 (2016), pp. 11068.
   PubMed Web of Science ®Google Scholar
• D. Panda, R.K. Sabat, S. Suwas, V.D. Hiwarkar and S.K. Sahoo, Texture weakening in pure magnesium during grain growth. Philos. Mag. 99 (2019), pp. 1362–1385.
   Web of Science ®Google Scholar
• D.J. Srolovitz, G.H. Grest and M.P. Anderson, Computer simulation of grain growth—V. Abnormal grain growth. Acta Metall. 33 (1985), pp. 2233–2247.
   Google Scholar
• R.K. Sabat, D. Panda and S.K. Sahoo, Growth mechanism of extension twin variants during annealing of pure magnesium: An ‘ex situ’ electron backscattered diffraction investigation. Mater. Charact. 126 (2017), pp. 10–16.
   Web of Science ®Google Scholar
• M.R. Barnett, M.D. Nave and C.J. Bettles, Deformation microstructures and textures of some cold rolled Mg alloys. Mater. Sci. Eng. A 386 (2004), pp. 205–211.
   Web of Science ®Google Scholar
• Z. Keshavarz and M.R. Barnett, EBSD analysis of deformation modes in Mg–3Al–1Zn. Scr. Mater. 55 (2006), pp. 915–918.
   Web of Science ®Google Scholar
• K. Hantzsche, J. Bohlen, J. Wendt, K.U. Kainer, S.B. Yi and D. Letzig, Effect of rare earth additions on microstructure and texture development of magnesium alloy sheets. Scr. Mater. 63 (2010), pp. 725–730.
   Web of Science ®Google Scholar
• D. Guan, W.M. Rainforth, L. Ma, B. Wynne and J. Gao, Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy. Acta Mater. 126 (2017), pp. 132–144.
   Web of Science ®Google Scholar
• H. Zhang, G. Huang, J. Lin and L. Wang, Influence of annealing temperature on microstructure and properties of warm-rolled AZ31 magnesium alloy sheets. Mater. Sci. Forum 747–748 (2013), pp. 352–358.
   Google Scholar
• X. Yang, H. Miura and T. Sakai, Isochronal annealing behavior of magnesium alloy AZ31 after Hot deformation. Mater. Trans. 46 (2005), pp. 2981–2987.
   Web of Science ®Google Scholar
• C.W. Su, L. Lu and M.O. Lai, Recrystallization and grain growth of deformed magnesium alloy. Philos. Mag. 88 (2008), pp. 181–200.
   Web of Science ®Google Scholar
• F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsevier, Amsterdam, 2004.
   Google Scholar
• J.J. Bhattacharyya, S.R. Agnew and G. Muralidharan, Texture enhancement during grain growth of magnesium alloy AZ31B. Acta Mater. 86 (2015), pp. 80–94.
   Web of Science ®Google Scholar
• R. Abbaschian, L. Abbaschian and R.E. Reed-Hill, Physical Metallurgy Principles, Cengage Learning, Stamford, CT, USA, 2009.
   Google Scholar
• H. Frost and M. Ashby, Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982.
   Google Scholar
• M.A. Thein, L. Lu and M.O. Lai, Kinetics of grain growth in nanocrystalline magnesium- based metal-metal composite synthesized by mechanical alloying. Compos. Sci. Technol. 66 (2006), pp. 531–537.
   Web of Science ®Google Scholar
• P. Cao, L. Lu and M.O. Lai, Grain growth and kinetics for nanocrystalline magnesium alloy produced by mechanical alloying. Mater. Res. Bull. 36 (2001), pp. 981–988.
   Web of Science ®Google Scholar
• X. Wang, L. Hu, K. Liu and Y. Zhang, Grain growth kinetics of bulk AZ31 magnesium alloy by hot pressing. J. Alloys Compd. 527 (2012), pp. 193–196.
   Web of Science ®Google Scholar
• G.T. Higgins, Grain-Boundary Migration and grain growth. Metal. Sci. 8(5) (1974), pp. 143–150.
   Google Scholar
• S. Biswas, D.-I. Kim and S. Suwas, Asymmetric and symmetric rolling of magnesium: evolution of microstructure, texture and mechanical properties. Mater. Sci. Eng. A. 550 (2012), pp. 19–30.
   Web of Science ®Google Scholar
• R.K. Sabat and S.K. Sahoo, An ‘ex situ’ electron backscattered diffraction study of nucleation and grain growth in pure magnesium. Mater. Des. 116 (2017), pp. 65–76.
   Web of Science ®Google Scholar
• R.K. Sabat, S.K. Sahoo, D. Panda, U.K. Mohanty and S. Suwas, Orientation dependent recrystallization mechanism during static annealing of pure magnesium. Mater. Charact. 132 (2017), pp. 388–396.
   Web of Science ®Google Scholar
• S.K. Sahoo, R.K. Sabat, S. Panda, S.C. Mishra and S. Suwas, Mechanical property of pure magnesium: from orientation perspective pertaining to deviation from basal orientation. J. Materi Eng. Perform. 24 (2015), pp. 2346–2353.
   Web of Science ®Google Scholar
• Q. Miao, L. Hu, X. Wang and E. Wang, Grain growth kinetics of a fine-grained AZ31 magnesium alloy produced by hot rolling. J. Alloys Compd. 493 (2010), pp. 87–90.
   Web of Science ®Google Scholar
• J.E. Burke and D. Turnbull, Recrystallization and grain growth. Prog. Met. Phys. 3 (1952), pp. 220–244.
   Web of Science ®Google Scholar
• K. Kruska, A. Rohatgi, R.S. Vemuri, L. Kovarik, T.H. Moser, J.E. Evans and N.D. Browning, Grain growth in nanocrystalline Mg-Al thin films. Metall. Mater. Trans. A 48 (2017), pp. 6118–6125.
   Google Scholar
• G. Gottstein and L.S. Shvindlerman, Grain Boundary Migration in Metals: Thermodynamics, Kinetics, Applications, CRC Press, Boca Raton, FL, 1999.
   Google Scholar
• D.J. Srolovitz, G.H. Grest and M.P. Anderson, Computer simulation of grain growth – V. Abnormal grain growth. Acta Metall. 33 (1985), pp. 2233–2247.
   Google Scholar
• H.J. Frost, C.V. Thompson and D.T. Walton, Simulation of thin film grain structures – II. Abnormal grain growth. Acta Metall. Mater. 40 (1992), pp. 779–793.
   Google Scholar
• M.N. Khan, M. Aljarrah, J.T. Wood and M. Medraj, The effect of cooling rate on thermophysical properties of magnesium alloys. J. Mater. Res. 26 (2011), pp. 974–982.
   Web of Science ®Google Scholar
• V. Raghavan, Al-Ce-Mg (aluminum-cerium-magnesium). JPEDAV 28 (2007), pp. 453–455.
   Google Scholar
• Y.P. Ren, G.W. Qin, W.L. Pei, H.D. Zhao, Y. Guo, H.X. Li, M. Jiang and S.M. Hao, Isothermal section of the Mg–Al–Mn ternary system at 400°C. J. Alloys Compd. 479 (2009), pp. 237–241.
   Web of Science ®Google Scholar
• X. Zhang, D. Kevorkov and M.O. Pekguleryuz, Study on the binary intermetallic compounds in the Mg–Ce system. Intermetallics 17 (2009), pp. 496–503.
   Web of Science ®Google Scholar
• F.G. Coury, E.L. Pires, W. Wolf, F.H.P. de Almeida, A.L.C. e Silva, W.J. Botta, C.S. Kiminami and M.J. Kaufman, Insight into the complex ternary phase behavior in Al-Mn-Ce alloys. J. Alloys Compd. 727 (2017), pp. 460–468.
   Google Scholar
• E. Ball and P. Prangnell, Tensile-compressive yield asymmetries in high strength wrought magnesium alloys. Scr. Metall. Mater. 31 (1994), pp. 111–116.
   Google Scholar
• H. Zhou, X. Zeng, L. Liu, Y. Zhang, Y. Zhu and W. Ding, Effect of cerium on microstructures and mechanical properties of AZ61 wrought magnesium alloy. J. Mater. Sci. 39 (2004), pp. 7061–7066.
   Web of Science ®Google Scholar
• A. Chakkedath, D.H. Escobar and C.J. Boehlert, In-situ observations of recrystallization and microstructural evolution in cerium-containing rolled magnesium alloys. Int. J. Lightweight Mater. Manuf. 1(4) (2018), pp. 256–264.
   Google Scholar