An advanced dislocation density-based approach to model the tensile flow behaviour of a 64.7Ni–31.96Cu alloy

References

• G.R. Ebrahimi, A. Momeni, H.R. Ezatpour, M. Jahazi and P. Bocher, Dynamic recrystallization in Monel 400 Ni-Cu alloy: mechanism and role of twinning. Mater. Sci. Eng. A 744(December) (2019), pp. 376–385.
   Google Scholar
• G.T. Gray, S.R. Chen and K.S. Vecchio, Influence of grain size on the constitutive response and substructure evolution of MONEL 400. Metall. Mater. Trans. A 30(5) (1999), pp. 1235–1247.
   Web of Science ®Google Scholar
• G.K. Dey, R. Tewari, P. Rao, S.L. Wadekar and P. Mukhopadhyay, Precipitation hardening in nickel-copper base alloy Monel K 500. Metall. Trans. A 24(12) (1993), pp. 2709–2719.
   Web of Science ®Google Scholar
• D.D.H. Lister and D.W.G. Cook, Nuclear plant materials and corrosion. 54(September) (2014), p.1.
   Google Scholar
• A. Wadham, Selection and specification of materials for nuclear applications. Course 228/Module 3, pp. 1–12.
   Google Scholar
• K. Osakada, Effects of strain rate and temperature in forming processes of metals. J. de Phys. IV Proc. (1997), pp. C3-XXXVII–C3-XLIV.
   Google Scholar
• G.R. Johnson and W.H. Cook, A constitutive modeling and data for metals subjected to large strain rates and high temperatures. Proc. 7th Int. Symp. Ballist, 1983.
   Google Scholar
• X. Wang, C. Huang, B. Zou, H. Liu, H. Zhu and J. Wang, Dynamic behavior and a modified Johnson-Cook constitutive model of Inconel 718 at high strain rate and elevated temperature. Mater. Sci. Eng. A 580 (2013), pp. 385–390.
   Web of Science ®Google Scholar
• L. Gambirasio and E. Rizzi, An enhanced Johnson-Cook strength model for splitting strain rate and temperature effects on lower yield stress and plastic flow. Comput. Mater. Sci. 113 (2016), pp. 231–265.
   Web of Science ®Google Scholar
• Y. Zhao, J. Sun, J. Li, Y. Yan and P. Wang, A comparative study on Johnson-Cook and modified Johnson-Cook constitutive material model to predict the dynamic behavior laser additive manufacturing FeCr alloy. J. Alloys Compd 723 (2017), pp. 179–187.
   Web of Science ®Google Scholar
• E. Voce, The relationship between stress and strain for homogeneous deformation. J. Inst. Met. 74 (1948), pp. 537–562.
   Google Scholar
• E. Voce, A practical strain hardening function. Metallurgia 51 (1955), pp. 219–226.
   Google Scholar
• H. Dini, A. Svoboda, N.E. Andersson, E. Ghassemali, L.E. Lindgren and A.E.W. Jarfors, Optimization and validation of a dislocation density based constitutive model for as-cast Mg-9%Al-1%Zn. Mater. Sci. Eng. A 710(October 2017) (2018), pp. 17–26.
   Google Scholar
• Y. Bergström and H. Hallén, An improved dislocation model for the stress-strain behaviour of polycrystalline α-Fe. Mater. Sci. Eng. 55 (1982), pp. 49–61.
   Google Scholar
• Y. Bergström, The plastic deformation of metals – a dislocation model and its applicability. Rev. Powder Metall. Phys. Ceram. 2/3 (1983), pp. 79–265.
   Google Scholar
• Y. Bergström, A dislocation model for the stress-strain behaviour of polycrystalline α-Fe with special emphasis on the variation of the densities of mobile and immobile dislocations. Mater. Sci. Eng. 5(4) (1970), pp. 193–200.
   Google Scholar
• H. Mecking and U.F. Kocks, Kinetics of flow and strain-hardening. Acta Metall. 29 (1981), pp. 1865–1875.
   Google Scholar
• Z.S. Basinski, Forest hardening in face centred cubic metals. Scr. Metall. 8 (1974), pp. 1301–1307.
   Google Scholar
• Y. Estrin and L.P. Kubin, Local strain hardening and nonuniformity of plastic deformation. Acta Metall. 34(12) (1986), pp. 2455–2464.
   Google Scholar
• U.F. Kocks, Laws for work-hardening and low-temperature creep. J. Eng. Mater. Technol. Trans. ASME 98 (1976), pp. 76–85.
   Web of Science ®Google Scholar
• U.F. Kocks and H. Mecking, Physics and phenomenology of strain hardening: the FCC case. Prog. Mater. Sci. 48(3) (2003), pp. 171–273.
   Web of Science ®Google Scholar
• H. Mecking, Work Hardening in Tension and Fatigue, TMS-AIME, Metals Park, OH, 1977.
   Google Scholar
• S.D. Yadav, V.D. Vijayanand, M. Nandgopal and G.V.P. Reddy, Tensile flow stress response of 304 HCu stainless steel employing a dislocation density based model and electron backscatter diffraction measurements. Philos. Mag. 100 (2020), pp. 312–336.
   Web of Science ®Google Scholar
• J. Cheng, S. Nemat-Nasser and W. Guo, A unified constitutive model for strain-rate and temperature dependent behavior of molybdenum. Mech. Mater. 33(11) (2001), pp. 603–616.
   Web of Science ®Google Scholar
• L.E. Lindgren, Q. Hao and D. Wedberg, Improved and simplified dislocation density based plasticity model for AISI 316 L. Mech. Mater. 108 (2017), pp. 68–76.
   Web of Science ®Google Scholar
• L.E. Lindgren, K. Domkin and S. Hansson, Dislocations, vacancies and solute diffusion in physical based plasticity model for AISI 316L. Mech. Mater. 40(11) (2008), pp. 907–919.
   Web of Science ®Google Scholar
• D. Wedberg and L.E. Lindgren, Modelling flow stress of AISI 316L at high strain rates. Mech. Mater. 91(P1) (2015), pp. 194–207.
   Google Scholar
• M. Fisk, J.C. Ion and L.E. Lindgren, Flow stress model for IN718 accounting for evolution of strengthening precipitates during thermal treatment. Comput. Mater. Sci. 82 (2014), pp. 531–539.
   Web of Science ®Google Scholar
• H. Li, Z. Zhao, H. Guo, Y. Ning and Z. Yao, Dislocation density-based model for flow behavior of a near-α titanium alloy considering effects of initial lamellar thickness. J. Mater. Eng. Perform. 28(4) (2019), pp. 2477–2487.
   Web of Science ®Google Scholar
• F. Barlat, M.V. Glazov, J.C. Brem and D.J. Lege, A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys. Int.J.Plast. 18 (2002), pp. 919–939.
   Web of Science ®Google Scholar
• J. Christopher and B.K. Choudhary, Kinetics of uniaxial tensile flow and work hardening behavior of type 316L(N) austenitic stainless steel in the framework of two-internal-variable approach. Metall. Mater. Trans. A 46(2) (2015), pp. 674–687.
   Google Scholar
• R. Chen, S. Zhang, X. Liu and F. Feng, A flow stress model of 300 m steel for isothermal tension. Materials (Basel) 14(2) (2021), pp. 1–13.
   Web of Science ®Google Scholar
• A. Malmelöv, M. Fisk, A. Lundbäck and L.E. Lindgren, Mechanism based flow stress model for alloy 625 and alloy 718. Materials (Basel) 13(24) (2020), pp. 1–17.
   Web of Science ®Google Scholar
• C. Poletti, R. Bureau, P. Loidolt, P. Simon, S. Mitsche and M. Spuller, Microstructure evolution in a 6082 aluminium alloy during thermomechanical treatment. Materials (Basel) 11(8) (2018), pp. 1–15.
   Web of Science ®Google Scholar
• B. Babu and L.E. Lindgren, Dislocation density based model for plastic deformation and globularization of Ti-6Al-4V. Int.J.Plast. 50 (2013), pp. 94–108.
   Web of Science ®Google Scholar
• E. Arzt, Size effects in materials due to microstructural and dimensional constraints: a comparative review. Acta Mater. 46(16) (1998), pp. 5611–5626.
   Web of Science ®Google Scholar
• D.L. Holt, Dislocation cell formation in metals. J. Appl. Phys. 41(8) (1970), pp. 3197–3201.
   Web of Science ®Google Scholar
• U.F. Kocks, Kinetics of solution hardening. Metall. Trans. A 16(12) (1985), pp. 2109–2129.
   Web of Science ®Google Scholar
• U.F. Kocks, A.S. Argon and M.F. Ashby, Thermodynamics and kinetics of slip. Prog. Mater. Sci. 19 (1975), pp. 1–47.
   Web of Science ®Google Scholar
• E. Nes, Modelling of work hardening and stress saturation in FCC metals. Prog. Mater. Sci. 41(3) (1997), pp. 129–193.
   Web of Science ®Google Scholar
• D.A. Butts and W.F. Gale, Equilibrium diagrams, in Smithells Metals Reference Book, 2003, pp.1–534.
   Google Scholar
• Bergström, The plastic deformation process of metals – 50 years development of a dislocation based theory ‘A journey from homogeneous to inhomogeneous plastic deformation’ Yngve Bergström, paper 10, March 2015, pp.1–41.
   Google Scholar
• T.L. Johnston and C.E. Feltner, Grain size effects in the strain hardening of polycrystals. Metall. Mater. Trans. B 1 (1970), pp. 1161–1167.
   Web of Science ®Google Scholar
• B.B. Rath, M.A. Imam and C.S. Pande, Nucleation and growth of twin interfaces in FCC metals and alloys. Mater. Phys. Mech. 1(2) (2000), pp. 61–66.
   Google Scholar
• A. Sourav, S. Yebaji and S. Thangaraju, Structure-property relationships in hot forged AlxCoCrFeNi high entropy alloys. Mater. Sci. Eng. A 793(April) (2020), pp. 139877.
   Google Scholar
• C.S. Pande, B.B. Rath and M.A. Imam, Effect of annealing twins on Hall–Petch relation in polycrystalline materials. Mater. Sci. Eng. A 367 (2004), pp. 171–175.
   Web of Science ®Google Scholar
• S. Nemat-Nasser, W.G. Guo and D.P. Kihl, Thermomechanical response of AL-6XN stainless steel over a wide range of strain rates and temperatures. J. Mech. Phys. Solids 49(8) (2001), pp. 1823–1846.
   Web of Science ®Google Scholar
• H.J. Frost and M.F. Ashby, Deformation-Mechanism Maps, Oxford Pergamon Press, 1982.
   Google Scholar
• H. Sieurin, J. Zander and R. Sandström, Modelling solid solution hardening in stainless steels. Mater. Sci. Eng. A 415(1–2) (2006), pp. 66–71.
   Web of Science ®Google Scholar
• H. Mecking, U.F. Kocks and C. Hartig, Taylor factors in materials with many deformation modes. Scr. Mater. 35(4) (1996), pp. 465–471.
   Web of Science ®Google Scholar
• C. Wang, S. Xue, G. Chen and P. Zhang, Constitutive model based on dislocation density and ductile fracture of Monel 400 thin sheet under tension. Met. Mater. Int. 23(2) (2017), pp. 264–271.
   Web of Science ®Google Scholar
• S. Nagarjuna, M. Srinivas and K.K. Sharma, Grain size dependence of flow stress in a Cu-26Ni-17Zn alloy. Acta Mater. 48(8) (2000), pp. 1807–1813.
   Web of Science ®Google Scholar
• Z. Jia, Z. Gao, J. Ji, D. Liu, T. Guo and Y. Ding, Evolution of twin boundaries and contribution to dynamic recrystallization and grain growth of Inconel 625. Adv. Eng. Mater. 21(9) (2019), pp. 1–11.
   Web of Science ®Google Scholar
• E.I. Galindo-Nava and P.E.J. Rivera-Díaz-Del-Castillo, A thermodynamic theory for dislocation cell formation and misorientation in metals. Acta Mater. 60(11) (2012), pp. 4370–4378.
   Web of Science ®Google Scholar
• M.R. Staker and D.L. Holt, The dislocation cell size and dislocation density in copper deformed at temperatures between 25 and 700°C. Acta Metall. 20(4) (1972), pp. 569–579.
   Google Scholar
• W.L. Chan and M.W. Fu, Experimental studies and numerical modeling of the specimen and grain size effects on the flow stress of sheet metal in microforming. Mater. Sci. Eng. A 528(25–26) (2011), pp. 7674–7683.
   Web of Science ®Google Scholar
• G.Z. Voyiadjis and F.H. Abed, Effect of dislocation density evolution on the thermomechanical response of metals with different crystal structures at low and high strain rates and temperatures. Arch. Mech. 57(4) (2005), pp. 299–343.
   Web of Science ®Google Scholar
• S.D. Yadav, B. Sonderegger, M. Stracey and C. Poletti, Modelling the creep behaviour of tempered martensitic steel based on a hybrid approach. Mater. Sci. Eng. A 662 (2016), pp. 330–341.
   Web of Science ®Google Scholar
• S.D. Yadav, T. Scherer, G.V. Prasad Reddy, K. Laha, G. Sasikalaa, S.K. Albert and C. Poletti, Creep modelling of P91 steel employing a microstructural based hybrid concept. Eng. Fract. Mech. 200(May) (2018), pp. 104–114.
   Google Scholar
• G.R. Leverant, M. Gell and S.W. Hopkins, The effect of strain rate on the flow stress and dislocation behavior of a precipitation-hardened nickel-base alloy. Mater. Sci. Eng. 8(3) (1971), pp. 125–133.
   Google Scholar
• S. Nemat-Nasser and W.G. Guo, Thermomechanical response of DH-36 structural steel over a wide range of strain rates and temperatures. Mech. Mater. 35(11) (2003), pp. 1023–1047.
   Web of Science ®Google Scholar
• Available at www.specialmetals.com.
   Google Scholar