Study of joint microstructural properties of ZrC/Al-Mg composites-enhanced AA7075

References

• S.S. Satputaley, Y. Waware, K. Ksheersagar, Y. Jichkar and K. Khonde, Experimental investigation on effect of TIG welding process on chromoly 4130 and aluminum 7075-T6. Materials Today: Proceedings 41 (2021), pp. 991–994.
   Google Scholar
• M. Fattahi, A. Ghaheri, N. Arabian, F. Amirkhanlu and H. Moayedi, Applying the ultrasonic vibration during TIG welding as a promising approach for the development of nanoparticle dispersion strengthened aluminum weldments. J. Mater. Process. Technol. 282 (2020), pp. 116672.
   Web of Science ®Google Scholar
• D. Oropeza, D.C. Hofmann, K. Williams, S. Firdosy, P. Bordeenithikasem, M. Sokoluk, M. Liese, J. Liu and X.C. Li, Welding and additive Manufacturing with nanoparticle-enhanced aluminum 7075 wire. J. Alloys Compd. 834 (2020), pp. 154987.
   PubMed Web of Science ®Google Scholar
• M. Sokoluk, C.Z. Cao, S.H. Pan and X.C. Li, Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075. Nat. Commun. 10 (2019), pp. 1–8.
   PubMed Web of Science ®Google Scholar
• E. Ahmadi, M. Ranjkesh, E. Mansoori, M. Fattahi, R.Y. Mojallal and S. Amirkhanlou, Microstructure and mechanical properties of Al/ZrC/TiC hybrid nanocomposite filler metals of tungsten inert gas welding fabricated by accumulative roll bonding. J. Manuf. Process. 26 (2017), pp. 173–177.
   Web of Science ®Google Scholar
• M. Fattahi, M. Rostami, F. Amirkhanlu, N. Arabian, E. Ahmadi and H. Moayedi, Fabrication of aluminum TIG welding filler rods reinforced by ZrO2/reduced graphene oxide hybrid nanoparticles via accumulative roll bonding. Diamond Relat. Mater. 99 (2019), pp. 107518.
   Web of Science ®Google Scholar
• X.C. Li and J.Q. Xu, 6.5 metal matrix nanocomposites. Comprehensive Composite Materials II 6 (2018), pp. 97–137.
   Google Scholar
• R. Siva, K.A. Vimalson, P. Yogeshkumar, N. Joy, M. Sangeetha and K. Bantha navas, Study on optimization of spur gear performance with titanium carbide incorporated aluminium matrix composite. Materials Today: Proceedings 44 (2021), pp. 3686–3691.
   Google Scholar
• K.R. Ramkumar, S. Sivasankaran, F.A. Al-Mufadi, S. Siddharth and R. Raghu, Investigations on microstructure, mechanical, and tribological behaviour of AA 7075–xwt.% TiC composites for aerospace applications. Archives of Civil and Mechanical Engineering 19 (2019), pp. 428–438.
   Web of Science ®Google Scholar
• V. Pejaković, L.M. Berger, S. Thiele, H. Rojacz and M. Rodríguez Ripoll, Fine grained titanium carbonitride reinforcements for laser deposition processes of 316L boost tribocorrosion resistance in marine environments. Mater. Des. 207 (2021), pp. 109847.
   Web of Science ®Google Scholar
• Q.B. Huang, R.Y. He, C.X. Wang and X. Tang, Microstructure, corrosion and mechanical properties of TiC particles/Al-5Mg composite fillers for Tungsten Arc welding of 5083 aluminum alloy. Materials (Basel) 12 (2019), pp. 3029.
   Google Scholar
• H.M. Liang, K. Yan, Q.Z. Wang, Y. Zhao, C. Liu and H. Zhang, Improvement in joint strength of spray-deposited Al-Zn-Mg-Cu alloy in underwater friction stir welding by altered temperature of cooling water. J. Mater. Eng. Perform. 25 (2016), pp. 5486–5493.
   Web of Science ®Google Scholar
• N. Murali, M. Sokoluk and X.C. Li, Study on aluminum alloy joints welded with nano-treated Al-Mg-Mn filler wire. Mater. Lett. 283 (2021), pp. 128739.
   Web of Science ®Google Scholar
• E.Y. Guo, S.S. Shuai, D. Kazantsev, S. Karagadde, A.B. Phillion, T. Jing, W.Z. Li and P.D. Lee, The influence of nanoparticles on dendritic grain growth in Mg alloys. Acta Mater. 152 (2018), pp. 127–137.
   Web of Science ®Google Scholar
• Z.X. Qu, T.R. Han, H.B. Cui and X. Tang, A comparison between Tungsten inert Gas welded joints welded by Commercial ER5183 filler and Al–Mg–Zn–Sc–Zr–Mn filler on microstructure and properties in 7075-T651 aluminum alloys. Mater. Trans. 62 (2021), pp. 386–395.
   Web of Science ®Google Scholar
• C.Z. Cao, L.Y. Chen, J.Q. Xu, H. Choi and X.C. Li, Strengthening Al–Bi–TiC0.7N0.3 nanocomposites by Cu addition and grain refinement. Mater. Sci. Eng. A 651 (2016), pp. 332–335.
   Web of Science ®Google Scholar
• M. Wang, B. Song, Q. Wei and Y. Shi, Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting. J. Alloys Compd. 810 (2019), pp. 151926.
   Web of Science ®Google Scholar
• H.T. Zhou, F.T. Kong, K. Wu, X.P. Wang and Y.Y. Chen, Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: lamellar colonies evolution and tensile properties. Mater. Des. 121 (2017), pp. 202–212.
   Web of Science ®Google Scholar
• H.B. Cui, Y. Lu, G.M. Xie, Z.A. Luo, C.X. Wang, F.B. Kabwe, Z.G. Liu and X. Tang, The study on martensite morphology in the stir zone and its influence to impact toughness during friction stir welding medium–Mn ultrahigh strength steel. Mater. Sci. Eng. A 798 (2020), pp. 140102.
   Web of Science ®Google Scholar
• Z.H. Xiong, S.L. Liu, S.F. Li, Y. Shi, Y.F. Yang and R.D.K. Misra, Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy. Mater. Sci. Eng. A 740-741 (2019), pp. 148–156.
   Web of Science ®Google Scholar
• H.C. Fang, H. Chao and K.H. Chen, Effect of recrystallization on intergranular fracture and corrosion of Al–Zn–Mg–Cu–Zr alloy. J. Alloys Compd. 622 (2015), pp. 166–173.
   Web of Science ®Google Scholar
• M. Bobby Kannan and V.S. Raja, Role of coarse intermetallic particles on the environmentally assisted cracking behavior of peak aged and over aged Al–Zn–Mg–Cu–Zr alloy during slow strain rate testing. J. Mater. Sci. 42 (2007), pp. 5458–5464.
   Web of Science ®Google Scholar
• M. Sokoluk, G.C. Yao, S.H. Pan, C.Z. Cao and X.C. Li, High strength nanotreated filler Material for TIG welding of AA6061. Light Met. 54 (2020), pp. 380–385.
   Google Scholar
• V. Shrivastava, P. Singh, G.K. Gupta, S.K. Srivastava and I.B. Singh, Synergistic effect of heat treatment and reinforcement content on the microstructure and corrosion behavior of Al-7075 alloy based nanocomposites. J. Alloys Compd. 857 (2021), pp. 157590.
   Web of Science ®Google Scholar
• T. Ramgopal, P.I. Gouma and G.S. Franke, Role of grain-boundary precipitates and solute-depleted zone on the intergranular corrosion of aluminum alloy 7150. Corrosion 58 (2002), pp. 687–697.
   Web of Science ®Google Scholar
• M.J. Robinson and N.C. Jackson, The influence of grain structure and intergranular corrosion rate on exfoliation and stress corrosion cracking of high strength Al-Cu-Mg alloys. Corros. Sci. 41 (1999), pp. 1013–1028.
   Web of Science ®Google Scholar