Dynamic recrystallisation behaviour of deformed austenite of Ti-Zr microalloyed low carbon steel with different Zr content

References

• O. Aleksei, Steel production technology development for the manufacture of pipes used in the extraction and transportation of petroleum products. Mater. Sci. Forum 1016 (2021), pp. 1051–1057.
   Google Scholar
• N.K. Tewary, S.K. Ghosh, R. Saha and S. Chatterjee, Deformation and annealing behaviour of a low carbon high Mn TWIP steel microalloyed with Ti. Philos. Mag. 99 (2019), pp. 2487–2516.
   Web of Science ®Google Scholar
• A.I. Gordienko, L.S. Derevyagina, A.G. Malikov, АМ Orishich, N.S. Surikova and M.N. Volochaev, The effect of the initial microstructure of the X70 low-carbon microalloyed steel on the heat affected zone formation and the mechanical properties of laser welded joints. Mater. Sci. Eng. A 797 (2020), pp. 140075.
   Web of Science ®Google Scholar
• T.N. Baker, Processes, microstructure and properties of vanadium microalloyed steels. Mater. Sci. Technol. 25 (2009), pp. 1083–1107.
   Web of Science ®Google Scholar
• Y.B. Cao, F.R. Xiao, G.Y. Qiao and B. Liao, Quantitative research on dissolving of Nb in high Nb microalloyed steels during reheating. J. Iron Steel Res. Int. 21 (2014), pp. 596–599.
   Web of Science ®Google Scholar
• S. Chen, L. Li, Z. Peng, X. Huo and H. Sun, On the correlation among continuous cooling transformations, interphase precipitation and strengthening mechanism in Ti-microalloyed steel. J. Mater. Res. Technol. 10 (2021), pp. 580–593.
   Google Scholar
• Y. Song, L.H. Liu and Z.W. Zhang, Research progress on the titanium microalloyed low carbon steels. Mater. Rep. 35 (2021), pp. 15175–15182.
   Google Scholar
• X.D. Huo, J.N. Xia, L.J. Li, Z.W. Peng, S.J. Chen and C.T. Peng, A review of research and development on titanium microalloyed high strength steels. Mater. Res. Express 6 (2018), pp. 062002.
   Google Scholar
• G. Xu, X.L. Gan, G.J. Ma, F. Luo and H. Zou, The development of Ti-alloyed high strength microalloy steel. Mater. Des. 31 (2010), pp. 2891–2896.
   Web of Science ®Google Scholar
• Z.X. Fan, W. Ding and Y.T. Yang, The effect of Ti addition on the wear resistance of Nb-containing cast steel. Philos. Mag. doi:10.1080/14786435.2021.1994162
   Web of Science ®Google Scholar
• C.F. Meng, Y.D. Wang, Y.H. Wei, B.Q. Shi, T.X. Cui and Y.T. Wang, Strengthening mechanisms for Ti- and Nb-Ti-micro-alloyed high-strength steels. J. Iron Steel Res. Int 23 (2016), pp. 350–356.
   Web of Science ®Google Scholar
• K. Zhang, Z.D. Li, X.J. Sun, Q.L. Yong, J.W. Yang, Y.M. Li and P.L. Zhao, Development of Ti–V–Mo complex microalloyed Hot-rolled 900-MPa-grade high-strength steel. Acta Metall. Sin. 28 (2015), pp. 641–648.
   Web of Science ®Google Scholar
• Z.Q. Wang, H. Zhang and C.H. Guo, Effect of molybdenum addition on the precipitation of carbides in the austenite matrix of titanium micro-alloyed steels. J. Mater. Sci. 51 (2016), pp. 4996–5007.
   Web of Science ®Google Scholar
• T.H. Xi, X. Chen and P.H. Li, Effect of Zr content on microstructure and properties of microalloyed steel. J. Wuhan Univ. Sci. Technol. 26 (2003), pp. 339–373.
   Google Scholar
• A. Maia, C. Guinancio and R. Germano, Use of zirconium in microalloyed steels. Adv. Mater. Res 15-17 (2007), pp. 834–839.
   Google Scholar
• K. He and T. Baker, Effect of zirconium additions on austenite grain coarsening of C–Mn and microalloy steels. Mater. Sci. Eng. A 256 (1998), pp. 111–119.
   Web of Science ®Google Scholar
• X.P. Mao, Titanium microalloyed steel, Metallurgical Industry Press, Beijing, 2016.
   Google Scholar
• P.C. Liu, J.C. Cao, S.B. Yin, Y.H. Yang and P. Gao, Effect of Zr on undissolved phases and carbide precipitation in Ti microalloyed low-carbon steel. J. Iron Steel Res. Int. 26 (2019), pp. 720–732.
   Web of Science ®Google Scholar
• P.C. Liu, Research on hot Deformation Behavior of Ti-Zr Microalloyed low Carbon Steel, Kunming University of Science and Technology, Kunming, 2018.
   Google Scholar
• C.M. Li, L. Huang and M.J. Zhao, Influence of hot deformation on dynamic recrystallization behavior of 300M steel: rules and modeling. Mater. Sci. Eng. A 797 (2020), pp. 139925.
   Web of Science ®Google Scholar
• X.Y. Sun, M. Zhang and Y. Wang, Kinetics and numerical simulation of dynamic recrystallization behavior of medium Mn steel in hot working. Steel Res. Inter. 91 (2020), pp. 1900675.
   Web of Science ®Google Scholar
• H.T. Zhao, J.J. Qi and R. Su, Hot deformation behaviour of 40CrNi steel and evaluation of different processing map construction methods. J. Mater. Res. Technol. 3 (2020), pp. 2856–2869.
   Google Scholar
• P. Li, H.L. Zhu and S.L. Yan, Hot deformation behavior and physically based constitutivemodeling of low activation martensitic steel. Atomic Energy Sci. Technol. 54 (2020), pp. 1904–1911.
   Google Scholar
• X. Wang, Y.P. Zhang and X.L. Ma, High temperature deformation and dynamic recrystallization behavior of AlCrCuFeNi high entropy alloy. Mater. Sci. Eng. A 778 (2020), pp. 139077.
   Web of Science ®Google Scholar
• H. Wei and G. Liu, Effect of Nb and C on the hot flow behavior of Nb microalloyed steels. Mater. Des. 56 (2014), pp. 437–444.
   Web of Science ®Google Scholar
• J. Bin and P. Yan, Constitutive relationships of Nb microalloyed steel during high temperature deformation. Acta Metall. Sin. 47 (2011), pp. 126–131.
   Web of Science ®Google Scholar
• Y.H. Deng, Y.H. Yang and J.C. Cao, Research on dynamic recrystallization behavior of 23Cr-2.2Ni-6.3Mn-0.26N low nickel type duplex stainless steel. Acta Metall. 55 (2019), pp. 445–456.
   Google Scholar
• M. Zeng and J.C. Cao, Effect of Zr on dynamic recrystallization behavior of Ti-microalloyed low carbon steels. Steel Res. Inter. 91 (2020), pp. 2000104.
   Web of Science ®Google Scholar
• J.B. Wu, G.Q. Liu and H. Wang, Effect of Nb, ti and V on the hot deformation behavior of Nb-containing microalloyed steel. Acta Metall. 46 (2010), pp. 838–843.
   Google Scholar
• Q.L. Yong, Secondary Phases in Steel, Metallurgical Industry Press, Beijing, 2006.
   Google Scholar
• W.C. Yang, Study on Dynamic Recrystallization and Strain-Induced Precipitation Behavior of HG785 Steel, Wuhan University of Science and Technology, Wuhan, 2015.
   Google Scholar
• J.N. Xia, X.D. Huo and L.J. Li, Development of Ti microalloyed high strength steel plate by controlling thermo-mechanical control process schedule. Mater. Res. Express 4 (2017), pp. 126504.
   Web of Science ®Google Scholar
• Z.Q. Wang, X.J. Sun and Z.J. Yang, Effect of Mn concentration on the kinetics of strain induced precipitation in Ti microalloyed steels. Mater. Sci. Eng. A 561 (2013), pp. 212–219.
   Web of Science ®Google Scholar
• W. Wang and L.M. Fu, Effect of the inclusion/precipitatate size on the intragranular ferrite nucleation. Acta Metall. 44 (2008), pp. 723–728.
   Google Scholar
• X.M. Zhang, L.Y. Ye and Y.X. Du, Particles stimulated nucleation of recrystallization in 01420 Al-Li alloy. J. Central South Univ. 38 (2007), pp. 19–23.
   Google Scholar
• P. Peng, K.M. Zhang and J. She, Role of second phases and grain boundaries on dynamic recrystallization behavior in ZK60 magnesium alloy. J. Alloys Comp. 861 (2020), pp. 157958.
   Web of Science ®Google Scholar
• M. Wang, L.F. Li and W.Y. Yang, Particles stimulate nucleation of dynamic recrystallization ferrite in a low carbon steel. J. Univ. Sci. Technol. B 30 (2008), pp. 993–1028.
   Google Scholar