Microstructure and texture evolution during grain growth of AM30 magnesium alloy

References

• B.L. Mordike and T. Ebert, Magnesium properties - applications - potential. Mater. Sci. Eng. A 302 (2001), pp. 37–45.
   Web of Science ®Google Scholar
• A.A. Luo, Magnesium casting technology for structural applications. J. Magnes. Alloy 1 (2013), pp. 2–22.
   Google Scholar
• R. Udhayan and D.P. Bhatt, On the corrosion behaviour of magnesium and its alloys using electrochemical techniques. J. Power Sources 63 (1996), pp. 103–107.
   Web of Science ®Google Scholar
• A. Atrens, G.L. Song, M. Liu, Z. Shi, F. Cao and M.S. Dargusch, Review of recent developments in the field of magnesium corrosion. Adv. Eng. Mater 17 (2015), pp. 400–453.
   Web of Science ®Google Scholar
• Y.N. Wang and J.C. Huang, Texture analysis in hexagonal materials. Mater. Chem. Phys 81 (2003), pp. 11–26.
   Web of Science ®Google Scholar
• M.H. Yoo, J.R. Morris, K.M. Ho and S.R. Agnew, Nonbasal deformation modes of HCP metals and alloys: role of dislocation source and mobility. Metall. Mater. Trans. A 33 (2002), pp. 813–822.
   Web of Science ®Google Scholar
• T. Obara, H. Yoshinga and S. Morozumi, {11-22}<-1-123> slip system in magnesium. Acta Metall. 21 (1973), pp. 845–853.
   Google Scholar
• P.J.F. Stohr and J.P. Poirier, Study in electron microscopy of pyramidal slip {112 ̅2} <112 ̅3 > in magnesium. Philos. Mag 25 (1972), pp. 1313–1329.
   Web of Science ®Google Scholar
• M.Z. Bian, A. Tripathi, H. Yu, N.D. Nam and L.M. Yan, Effect of aluminum content on the texture and mechanical behavior of Mg-1wt% Mn wrought magnesium alloys. Mater. Sci. Eng. A 639 (2015), pp. 320–326.
   Web of Science ®Google Scholar
• J.P. Hadorn, K. Hantzsche, S. Yi, J. Bohlen, D. Letzig, J.A. Wollmershauser and S.R. Agnew, Role of solute in the texture modification during hot deformation of Mg-rare earth alloys. Metall. Mater. Trans. A 43 (2012), pp. 1347–1362.
   Web of Science ®Google Scholar
• A. Imandoust, C.D. Barrett, T. Al-Samman, M.A. Tschopp, E. Essadiqi, N. Hort and H. El Kadiri, Unraveling recrystallization mechanisms governing texture development from rare-earth element additions to magnesium. Metall. Mater. Trans. A 49 (2018), pp. 1809–1829.
   Google Scholar
• K. Matsubara, Y. Miyahara, Z. Horita and T.G. Langdon, Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP. Acta Mater. 51 (2003), pp. 3073–3084.
   Web of Science ®Google Scholar
• T. Al-Samman and G. Gottstein, Influence of strain path change on the rolling behavior of twin roll cast magnesium alloy. Scr. Mater 59 (2008), pp. 760–763.
   Web of Science ®Google Scholar
• G. Vespa, L.W.F. Mackenzie, R. Verma, F. Zarandi, E. Essadiqi and S. Yue, The influence of the as-hot rolled microstructure on the elevated temperature mechanical properties of magnesium AZ31 sheet. Mater. Sci. Eng. A 487 (2008), pp. 243–250.
   Web of Science ®Google Scholar
• B. Kondori and R. Mahmudi, Impression creep characteristics of a cast Mg alloy. Metall. Mater. Trans. A 40 (2009), pp. 2007–2015.
   Google Scholar
• H. Asgari, J.A. Szpunar and A.G. Odeshi, Texture evolution and dynamic mechanical behavior of cast AZ magnesium alloys under high strain rate compressive loading. Mater. Des 61 (2014), pp. 26–34.
   Web of Science ®Google Scholar
• O. Lunder, K. Nisancioglu and R.S. Hansen, Corrosion of die cast magnesium-aluminum alloys. SAE Tech. Pap (1993), pp. 115–126.
   Google Scholar
• G. Baril, C. Blanc and N. Pébère, AC impedance spectroscopy in characterizing time-dependent corrosion of AZ91 and AM50 magnesium alloys characterization with respect to their microstructures. J. Electrochem. Soc 148 (2001), pp. B489–B496.
   Web of Science ®Google Scholar
• A.A. Luo, C. Zhang and A.K. Sachdev, Effect of eutectic temperature on the extrudability of magnesium-aluminum alloys. Scr. Mater 66 (2012), pp. 491–494.
   Web of Science ®Google Scholar
• C.H. Cáceres and D.M. Rovera, Solid solution strengthening in concentrated Mg-Al alloys. J. Light Met 1 (2001), pp. 151–156.
   Google Scholar
• M. Furui, Y. Ebata, H. Yamada, S. Ikeno, K. Sakakibara and S. Saikawa, Grain boundary and intragranular reactions during aging in Mg-Al system alloys poured into sand and iron molds. Mater. Trans 52 (2011), pp. 285–291.
   Web of Science ®Google Scholar
• D.H. StJohn, M.A. Qian, M.A. Easton, P. Cao and Z. Hildebrand, Grain refinement of magnesium alloys. Metall. Mater. Trans. A 36 (2005), pp. 1669–1679.
   Web of Science ®Google Scholar
• X. Huang, K. Suzuki, Y. Chino and M. Mabuchi, Texture and stretch formability of AZ61 and AM60 magnesium alloy sheets processed by high-temperature rolling. J. Alloys Compd 632 (2015), pp. 94–102.
   Web of Science ®Google Scholar
• X. Huang, K. Suzuki, Y. Chino and M. Mabuchi, Influence of aluminum content on the texture and sheet formability of AM series magnesium alloys. Mater. Sci. Eng. A 633 (2015), pp. 144–153.
   Web of Science ®Google Scholar
• X. Wang, L. Hu, K. Liu and Y. Zhang, Grain growth kinetics of bulk AZ31 magnesium alloy by hot pressing. J. Alloys Compd 527 (2012), pp. 193–196.
   Web of Science ®Google Scholar
• Q. Miao, L. Hu, X. Wang and E. Wang, Grain growth kinetics of a fine-grained AZ31 magnesium alloy produced by hot rolling. J. Alloys Compd 493 (2010), pp. 87–90.
   Web of Science ®Google Scholar
• C.W. Su, L. Lu and M.O. Lai, Recrystallization and grain growth of deformed magnesium alloy. Philos. Mag 88 (2008), pp. 181–200.
   Web of Science ®Google Scholar
• J.J. Bhattacharyya, S.R. Agnew and G. Muralidharan, Texture enhancement during grain growth of magnesium alloy AZ31B. Acta Mater. 86 (2015), pp. 80–94.
   Web of Science ®Google Scholar
• D.J. Srolovitz, G.S. Grest and M.P. Anderson, Computer simulation of grain growth-V. abnormal grain growth. Acta Metall. 33 (1985), pp. 2233–2247.
   Google Scholar
• J. Bruno and P.R. Rios, The grain size distribution and the detection of abnormal grain growth of austenite in an eutectoid steel containing niobium. Scr. Metall. Mater 32 (1995), pp. 601–606.
   Google Scholar
• R.K. Sabat, D. Panda and S.K. Sahoo, Growth mechanism of extension twin variants during annealing of pure magnesium: an ‘ex situ’ electron backscattered diffraction investigation. Mater. Charact 126 (2017), pp. 10–16.
   Web of Science ®Google Scholar
• M.R. Barnett, M.D. Nave and C.J. Bettles, Deformation microstructures and textures of some cold rolled Mg alloys. Mater. Sci. Eng. A 386 (2004), pp. 205–211.
   Web of Science ®Google Scholar
• D.W. Brown, S.R. Agnew, M.A.M. Bourke, T.M. Holden, S.C. Vogel and C.N. Tomé, Internal strain and texture evolution during deformation twinning in magnesium. Mater. Sci. Eng. A 399 (2005), pp. 1–12.
   Web of Science ®Google Scholar
• F. Abouhilou, A. Hanna, H. Azzeddine and D. Bradai, Microstructure and texture evolution of AZ31 Mg alloy after uniaxial compression and annealing. J. Magnes. Alloy 7 (2019), pp. 124–133.
   Web of Science ®Google Scholar
• D. Panda, R.K. Sabat, S. Suwas, V.D. Hiwarkar and S.K. Sahoo, Texture weakening in pure magnesium during grain growth. Philos. Mag 99 (2019), pp. 1362–1385.
   Web of Science ®Google Scholar
• A. E112-96, Standard Test Methods for Determining Average Grain Size, 2004.
   Google Scholar
• X. Huang, K. Suzuki and N. Saito, Microstructure and mechanical properties of AZ80 magnesium alloy sheet processed by differential speed rolling. Mater. Sci. Eng. A 508 (2009), pp. 226–233.
   Web of Science ®Google Scholar
• X. Huang, K. Suzuki and N. Saito, Textures and stretch formability of Mg-6Al-1Zn magnesium alloy sheets rolled at high temperatures up to 793 K. Scr. Mater 60 (2009), pp. 651–654.
   Web of Science ®Google Scholar
• R. Abbaschian, L. Abbaschian and R.E. Reed-Hill, Physical Metallurgy Principles, 4th ed., Cengage Learning, Stamford, USA, 2009.
   Google Scholar
• H. Frost and M. Ashby, Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, 1st ed., Pergamon Press, Oxford, New York, 1982.
   Google Scholar
• J.E. Burke and D. Turnbull, Recrystallization and grain growth. Prog. Met. Phys. 3 (1952), pp. 220–292.
   Web of Science ®Google Scholar
• P. Cao, L. Lu and M.O. Lai, Grain growth and kinetics for nanocrystalline magnesium alloy produced by mechanical alloying. Mater. Res. Bull 36 (2001), pp. 981–988.
   Web of Science ®Google Scholar
• M.A. Thein, L. Lu and M.O. Lai, Kinetics of grain growth in nanocrystalline magnesium-based metal-metal composite synthesized by mechanical alloying. Compos. Sci. Technol 66 (2006), pp. 531–537.
   Web of Science ®Google Scholar
• G.T. Higgins, Grain-Boundary migration and grain growth. Met. Sci. 8 (1974), pp. 143–150.
   Google Scholar
• M.M. Hoseini-Athar, R. Mahmudi, R.P. Babu and P. Hedström, Effect of Zn content on the microstructural stability and grain growth kinetics of fine-grained extruded Mg–Gd–Zn alloys. J. Alloys Compd 831 (2020), pp. 154766.
   Web of Science ®Google Scholar
• K. Kruska, A. Rohatgi, R.S. Vemuri, L. Kovarik, T.H. Moser, J.E. Evans and N.D. Browning, Grain growth in nanocrystalline Mg-Al thin films. Metall. Mater. Trans. A 48 (2017), pp. 6118–6125.
   Google Scholar
• L. Liu, H. Yu, W. Yang and Z. Wang, Inhibition of grain growth by a Ce-rich precipitate during the annealing of spray-casted magnesium alloy. Materials. (Basel) 12 (2019), pp. 742–752.
   Web of Science ®Google Scholar
• F. Guo, R. Pei, L. Jiang, D. Zhang, S. Korte-Kerzel and T. Al-Samman, The role of recrystallization and grain growth in optimizing the sheet texture of magnesium alloys with calcium addition during annealing. J. Magnes. Alloy 8 (2020), pp. 252–268.
   Web of Science ®Google Scholar
• F.J. Humphreys and M.G. Ardakani, Grain boundary migration and zener pinning in particle-containing copper crystals. Acta Mater. 44 (1996), pp. 2717–2727.
   Web of Science ®Google Scholar
• S.K. Sahoo, R.K. Sabat, S. Panda, S.C. Mishra and S. Suwas, Mechanical property of pure magnesium: from orientation perspective pertaining to deviation from basal orientation. J. Mater. Eng. Perform 24 (2015), pp. 2346–2353.
   Web of Science ®Google Scholar
• R.K. Sabat and S.K. Sahoo, An ‘ex situ’ electron backscattered diffraction study of nucleation and grain growth in pure magnesium. Mater. Des 116 (2017), pp. 65–76.
   Web of Science ®Google Scholar
• R.K. Sabat, S.K. Sahoo, D. Panda, U.K. Mohanty and S. Suwas, Orientation dependent recrystallization mechanism during static annealing of pure magnesium. Mater. Charact 132 (2017), pp. 388–396.
   Web of Science ®Google Scholar
• Y. Huang and F.J. Humphreys, Measurements of grain boundary mobility during recrystallization of a single-phase aluminium alloy. Acta Mater. 47 (1999), pp. 2259–2268.
   Web of Science ®Google Scholar
• F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon Press, New York, Elsevier, 2004.
   Google Scholar
• R. Ding and Z.X. Guo, Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization. Acta Mater. 49 (2001), pp. 3163–3175.
   Web of Science ®Google Scholar
• K. Lücke and H.P. Stüwe, On the theory of impurity controlled grain boundary motion. Acta Metall. 19 (1971), pp. 1087–1099.
   Google Scholar
• J.W. Cahn, The impurity-drag effect in grain boundary motion. Acta Metall. 10 (1962), pp. 789–798.
   Google Scholar
• D.K. Kim, H.W. Lee, K.H. Jung and Y.T. Im, Mesoscopic modeling of primary recrystallization of AA1050 with curvature-driven interface migration effect. Mater. Trans 54 (2013), pp. 81–89.
   Web of Science ®Google Scholar
• W.T. Read and W. Shockley, Dislocation models of crystal grain boundaries. Phys. Rev 78 (1950), pp. 275–289.
   Web of Science ®Google Scholar
• K.G.F. Janssens, An introductory review of cellular automata modeling of moving grain boundaries in polycrystalline materials. Math. Comput. Simul 80 (2010), pp. 1361–1381.
   Web of Science ®Google Scholar
• Y. Ma, J. Zhang and M. Yang, Research on microstructure and alloy phases of AM50 magnesium alloy. J. Alloys Compd 470 (2009), pp. 515–521.
   Web of Science ®Google Scholar
• Y.P. Ren, G.W. Qin, W.L. Pei, H.D. Zhao, Y. Guo, H.X. Li, M. Jiang and S.M. Hao, Isothermal section of the Mg-Al-Mn ternary system at 400 °C. J. Alloys Compd 479 (2009), pp. 237–241.
   Web of Science ®Google Scholar
• J.W. Xian, L. Peng, G. Zeng, D. Wang and C.M. Gourlay, Al11mn4 formation on Al8Mn5 during the solidification and heat treatment of AZ-series magnesium alloys. Materialia 19 (2021), pp. 101192.
   Google Scholar
• D. Dubey, K. Kadali, H. Kancharla, A. Zindal, J. Jain, K. Mondal and S.S. Singh, Effect of precipitate characteristics on the corrosion behavior of a AZ80 magnesium alloy. Met. Mater. Int 27 (2021), pp. 3282–3292.
   Web of Science ®Google Scholar
• D. Panda, R.K. Sabat, S. Suwas and S.K. Sahoo, Role of temperature and precipitates on the evolution of microstructure and texture during grain growth of Mg–3Al–0.2Ce alloy. Philos. Mag 102 (2022), pp. 1091–1120.
   Web of Science ®Google Scholar
• A.S.H. Kabir, M. Sanjari, J. Su, I.H. Jung and S. Yue, Effect of annealing on microstructure and texture evolution of uniaxial hot compressed Mg–Al–Sn alloys. J. Mater. Sci 51 (2016), pp. 1600–1609.
   Web of Science ®Google Scholar
• A. Chakkedath, D. Hernández-Escobar and C.J. Boehlert, In-situ observations of recrystallization and microstructural evolution in cerium-containing rolled magnesium alloys. Int. J. Light. Mater. Manuf 1 (2018), pp. 256–264.
   Google Scholar
• S.M. Fatemi, Y. Moradipour and M. Hajian, Deformation Mechanisms and evolution of second phase particles of Mg–Y–Nd–Gd–Zr alloy during plane strain compression. Met. Mater. Int 27 (2021), pp. 4717–4729.
   Web of Science ®Google Scholar
• U.M. Chaudry, T.H. Kim, Y.S. Kim, K. Hamad, Y.G. Ko and J.G. Kim, Dynamic recrystallization behavior of AZ31-0.5Ca magnesium alloy during warm rolling. Mater. Sci. Eng. A 762 (2019), pp. 138085.
   Web of Science ®Google Scholar
• H. Zhou, X. Zeng, L. Liu, Y. Zhang, Y. Zhu and W. Ding, Effect of cerium on microstructures and mechanical properties of AZ61 wrought magnesium alloy. J. Mater. Sci 39 (2004), pp. 7061–7066.
   Web of Science ®Google Scholar