Improving the dispersoid distribution and recrystallization resistance of a Zr-containing 6xxx alloy using two-step homogenization

References

• G.S. Peng, K.H. Chen, H.C. Fang, S.Y. Chen and H. Chao, The effect of recrystallization on corrosion and electrochemical behavior of 7150 Al alloy. Mater. Corros 62 (2011), pp. 35–40.
   Google Scholar
• Y. Birol, Effect of Cr and Zr on the grain structure of extruded EN AW 6082 alloy. Met. Mater. Int 20 (2016), pp. 727–732.
   Google Scholar
• C. Poletti, T. Wójcik and C. Sommitsch, Hot deformation of AA6082 containing fine intermetallic particles. Metall. Mater. Trans. A 44 (2012), pp. 1577–1586.
   Google Scholar
• K.E. Knipling, D.C. Dunand and D.N. Seidman, Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600°C. Acta Mater. 56 (2008), pp. 1182–1195.
   Web of Science ®Google Scholar
• Z. Jia, G. Hu, B. Forbord and J.K. Solberg, Enhancement of recrystallization resistance of Al–Zr–Mn by two-step precipitation annealing. Mater. Sci. Eng., A 483–484 (2008), pp. 195–198.
   Google Scholar
• Z. Guo, G. Zhao and X.G. Chen, Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy. Mater. Charact 102 (2015), pp. 122–130.
   Web of Science ®Google Scholar
• H. Li, Z. Gao, H. Yin, H. Jiang, X. Su and J. Bin, Effects of Er and Zr additions on precipitation and recrystallization of pure aluminum. Scripta Mater 68 (2013), pp. 59–62.
   Google Scholar
• E. Nes, N. Ryum and O. Hunderi, On the Zener drag. Acta Metall. 33 (1985), pp. 11–22.
   Google Scholar
• Z. Xie, Z. Jia, K. Xiang, Y. Kong, Z. Li, X. Fan, W. Ma, H. Zhang, L. Lin, K. Marthinsen and Q. Liu, Microstructure evolution and recrystallization resistance of a 7055 alloy fabricated by spray forming technology and by conventional ingot metallurgy. Metall. Mater. Trans. A 51 (2020), pp. 5378–5388.
   Google Scholar
• Z. Guo, G. Zhao and X.G. Chen, Effects of homogenization treatment on recrystallization behavior of 7150 aluminum sheet during post-rolling annealing. Mater. Charact 114 (2016), pp. 79–87.
   Web of Science ®Google Scholar
• Y. Deng, J. Xu, J. Chen and X. Guo, Effect of double-step homogenization treatments on the microstructure and mechanical properties of Al–Cu–Li–Zr alloy. Mater. Sci. Eng., A 795 (2020).
   Google Scholar
• X.-y. LÜ, E.-j. Guo, P. Rometsch and L.-j. Wang, Effect of one-step and two-step homogenization treatments on distribution of Al3Zr dispersoids in commercial AA7150 aluminium alloy. Trans. Nonferrous Met. Soc. China 22 (2012), pp. 2645–2651.
   Web of Science ®Google Scholar
• J.D. Robson, Optimizing the homogenization of zirconium containing commercial aluminium alloys using a novel process model. Mater. Sci. Eng., A 338 (2002), pp. 219–229.
   Web of Science ®Google Scholar
• Q. Liu, G. Fan, Z. Tan, Z. Li, D. Zhang, J. Wang and H. Zhang, Precipitation of Al3Zr by two-step homogenization and its effect on the recrystallization and mechanical property in 2195 Al–Cu–Li alloys. Mater. Sci. Eng., A 821 (2021), pp. 141637.
   Google Scholar
• H.J. McQueen, S. Spigarelli, M.E. Kassner and E. Evangelista, Hot deformation and processing of aluminum alloys, CRC Press, FL,USA, 2016.
   Google Scholar
• Y. Li, B. Lu, W. Yu, J. Fu, G. Xu and Z. Wang, Two-stage homogenization of Al-Zn-Mg-Cu-Zr alloy processed by twin-roll casting to improve L12 Al3Zr precipitation, recrystallization resistance, and performance. J. Alloys Compd 882 (2021).
   Google Scholar
• K.E. Knipling, D.C. Dunand and D.N. Seidman, Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425 C. Acta Mater. 56 (2008), pp. 114–127.
   Web of Science ®Google Scholar
• R. Nadella, D. Eskin, Q. Du and L. Katgerman, Macrosegregation in direct-chill casting of aluminium alloys. Prog. Mater Sci 53 (2008), pp. 421–480.
   Web of Science ®Google Scholar
• A.G. Mochugovskiy, A.V. Mikhaylovskaya, N.Y. Tabachkova and V.K. Portnoy, The mechanism of L12 phase precipitation, microstructure and tensile properties of Al-Mg-Er-Zr alloy. Mater. Sci. Eng., A 744 (2019), pp. 195–205.
   Google Scholar
• P.H.L. Souza, C.A.S.d. Oliveira, and J.M.d.V. Quaresma, Precipitation hardening in dilute Al–Zr alloys. J. Mater. Res. Technol 7 (2018), pp. 66–72.
   Google Scholar
• L. Litynska, D. Abou-Ras, G. Kostorz and J. Dutkiewicz, TEM and HREM study of Al3Zr precipitates in an Al-Mg-Si-Zr alloy. J. Microsc. 223 (2006), pp. 182–184.
   PubMedGoogle Scholar
• S. Tsunekawa and M.E. Fine, Lattice parameters of Al3 (ZrxTi1-x) vs. x in Al-2 at.% (Ti + Zr) alloys. Scr. metall. mater 16 (1982), pp. 391–392.
   Google Scholar
• Z.-H. Jia, J.-P. Couzinié, N. Cherdoudi, I. Guillot, L. Arnberg, P. Åsholt, S. Brusethaug, B. Barlas and D. Massinon, Precipitation behaviour of Al3Zr precipitate in Al–Cu–Zr and Al–Cu–Zr–Ti–V alloys. Trans. Nonferrous Met. Soc. China 22 (2012), pp. 1860–1865.
   Google Scholar
• H. Seo, J. Gu, K. Park, Y. Jung, J. Lee and W. Chung, Solidification and segregation behaviors in 6061 aluminum alloy. Met. Mater. Int 19 (2013), pp. 433–438.
   Google Scholar
• W. Wang and A. Alfantazi, Correlation between grain orientation and surface dissolution of niobium. Appl. Surf. Sci 335 (2015), pp. 223–226.
   Web of Science ®Google Scholar
• J. Li, X. Wu, L. Cao, B. Liao, Y. Wang and Q. Liu, Hot deformation and dynamic recrystallization in Al-Mg-Si alloy. Mater. Charact 173 (2021), pp. 110976.
   Web of Science ®Google Scholar
• R. Luo, Y. Cao, H. Bian, L. Chen, C.-T. Peng, F. Cao, L. Ouyang, Y. Qiu, Y. Xu, A. Chiba and X. Cheng, Hot workability and dynamic recrystallization behavior of a spray formed 7055 aluminum alloy. Mater. Charact 178 (2021), pp. 111203.
   Google Scholar
• C. Shi and X.-G. Chen, Effect of Zr addition on hot deformation behavior and microstructural evolution of AA7150 aluminum alloy. in Mater. Sci. Eng., A 596 (2014), pp. 183–193.
   Google Scholar
• Q. Zang, H. Yu, Y.-S. Lee, M.-S. Kim and H.-W. Kim, Effects of initial microstructure on hot deformation behavior of Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy. Mater. Charact 151 (2019), pp. 404–413.
   Google Scholar
• A. Elasheri, E.M. Elgallad, N. Parson and X.G. Chen, Evolution of Zr-bearing dispersoids during homogenization and their effects on hot deformation and recrystallization resistance in Al-0.8%Mg-1.0%Si alloy. J. Mater. Eng. Perform 30 (2021), pp. 7851–7862.
   Google Scholar
• A. Elasheri, E.M. Elgallad, N. Parson and X.-G. Chen, Effect of Si level on the evolution of Zr-bearing dispersoids and the related hot deformation and recrystallization behaviors in Al-Si-Mg 6xxx alloys. Adv. Eng. Mater (2022), pp. 2101606.
   Google Scholar