Research on QPQ rare earth nitriding process on properties of Q235 carbon steel

References

• S. Dong, Y. Yang, and T. Liang, Construction and corrosion resistance of Ni-B4C superhydrophobic composite coatings on Q235 steel. Surf. Coat. Technol 422 (2021), pp. 127551. doi:10.1016/j.surfcoat.2021.127551.
   Web of Science ®Google Scholar
• J.F. Ren, B. Qian, J.Z. Li, Z.W. Song, L. Hao, and J.S. Shi, Highly efficient polypyrrole sensitized TiO2 nanotube films for photocathodic protection of Q235 carbon steel. Corros. Sci 111 (2016), pp. 596–601. doi:10.1016/j.corsci.2016.06.001.
   Web of Science ®Google Scholar
• W.S. Shin, A. Sim, and S. Baek, Microstructural characterizations and wear and corrosion behaviors of laser-nitrided NAK80 mold steel. Surf. Coat. Technol 410 (2021), pp. 126956. doi:10.1016/j.surfcoat.2021.126956.
   Web of Science ®Google Scholar
• R. Bian, T. Su, Y. Chen, S.Y. Zhu, Z. Qu, C.G. Liu, T. Li, and X.F. Xie, Recycling of high-purity Simonkolleite from electroplating wastewater via a coupled PAC coagulation and hydrothermal separation route. J. Water Process. Eng 43 (2021), pp. 102320. doi:10.1016/j.jwpe.2021.102320.
   Web of Science ®Google Scholar
• W.S. De Rosset and J.S. Montgomery, Cobalt-base alloy gun barrel study. Wear 316(1-2) (2014), pp. 119–123. doi:10.1016/j.wear.2014.05.001.
   Web of Science ®Google Scholar
• L. Zhang, C. Ren, Q. Yu, J. Zhang, S.Q. Sun, Q.S. Ren, Y. Lian, X.L. Chen, and W. Gao, Microstructure and properties of 1Cr12Ni2WMoVNb (GX-8) steel bored barrels with and without QPQ treatment. Surf. Coat. Technol 315 (2017), pp. 95–104. doi:10.1016/j.surfcoat.2017.02.027.
   Web of Science ®Google Scholar
• T. Khan, Y. Tamura, and H. Yamamoto, Friction and wear mechanisms in boundary lubricated oxy-nitrided treated samples. Wear 368-369 (2016), pp. 101–115. doi:10.1016/j.wear.2016.09.010.
   Web of Science ®Google Scholar
• Y. Liu, Y. Sun, and W. Zhang, Effect of quench polish on properties of pearlite ductile cast iron. Int. J. Metalcasting 14(2) (2020), pp. 556–563. doi:10.1007/s40962-019-00384-3.
   Web of Science ®Google Scholar
• M.Y. Dai, Y. Chen, Y.T. Chai, and J. Hu, Kinetics analysis of higher temperature salt bath nitriding for Aisi 1045 steel. Surf. Rev. Lett 23 (2016), pp. 6. doi:10.1142/S0218625X16500499.
   Web of Science ®Google Scholar
• G.J. Li, J. Wang, Q. Peng, C. Li, Y. Wang, and B.L. Shen, Influence of salt bath nitrocarburizing and post-oxidation process on surface microstructure evolution of 17-4PH stainless steel. J. Mater. Process. Technol 207(1-3) (2008), pp. 187–192. doi:10.1016/j.jmatprotec.2007.12.082.
   Web of Science ®Google Scholar
• J.Y. Hu, S.A. Cao, L. Yin, Q.Q. Liang, and J.L. Xie, Study on the corrosion behavior of Q235A carbon steel in RO product water of seawater. Anti-Corros. Method M 59 (2012), pp. 305–310. doi:10.1108/00035591211274424.
   Web of Science ®Google Scholar
• M.M. Thackeray, W.I.F. David, and J.B. Goodenough. Structural characterization of the lithiated iron oxides LixFe3O4 and LixFe2O3 (0 x 2). Mater. Res. Bull. 17 (1982), pp. 785–793. doi:10.1016/0025-5408(82)90029-0.
   Web of Science ®Google Scholar
• J. Sun, L.Y. Mei, Y. Li, Y.Y. Lei, X.D. Du, and Y.C. Wu, Two-step nitriding behavior of pure iron with a nanostructured surface layer. Adv. Eng. Mater 21 (2019). doi:10.1002/adem.201900359.
   Web of Science ®Google Scholar
• K. Wang, D.F. Luo, and L. Zhang, Research on fast nitriding by direct current field base on the deep-layer QPQ technology. Phys. Procedia 50 (2013), pp. 113–119. doi:10.1016/j.phpro.2013.11.019.
   Google Scholar
• G.J. Li, Q. Peng, C. Li, Y. Wang, J. Gao, S.Y. Chen, J. Wang, and B.L. Shen, Microstructure analysis of 304L austenitic stainless steel by QPQ complex salt bath treatment. Mater. Charact 59(9) (2007), pp. 1359–1363. doi:10.1016/j.matchar.2007.09.011.
   Web of Science ®Google Scholar
• G.J. Li, Q. Peng, C. Li, Y. Wang, J. Gao, S.Y. Chen, J. Wang, and B.L. Shen, Surface microstructure of 316L austenitic stainless steel by the salt bath nitrocarburizing and post-oxidation process known as QPQ. Surf. Coat. Technol 202(13) (2008), pp. 2865–2870. doi:10.1016/j.surfcoat.2007.10.032.
   Web of Science ®Google Scholar
• B. Chakraborty, P.K. Nandi, A. Kundu, and Y. Kawazoe, Nitrogen doping in non-magnetic yttrium oxide: Induction of room temperature ferromagnetism from first principles simulations. J. Magn. Magn. Mater 528 (2021), pp. 167840. doi:10.1016/j.jmmm.2021.167840.
   Web of Science ®Google Scholar
• L. Torchane, Influence of rare earths on the gas nitriding kinetics of 32CrMoNiV5 steel at low temperature. Surf. Interfaces 23 (2021), pp. 101016. doi:10.1016/j.surfin.2021.101016.
   Web of Science ®Google Scholar
• E.H.D.M.V. Voorthuysen, D.O. Boerma, and N.C. Chechenin, Low-temperature extension of the Lehrer diagram and the iron-nitrogen phase diagram. Metall. Mater. Trans. A 33 (2002), pp. 2593–2598. doi:10.1007/s11661-002-0380-2.
   Web of Science ®Google Scholar
• M. Jung, S.R. Meka, and E.J. Mittemeijer, Incubation time for iron-nitride layer formation upon gaseous nitriding of iron-based alloys. Philos. Mag 96 (2016), pp. 1369–1385. doi:10.1080/14786435.2016.1162916.
   Web of Science ®Google Scholar
• P.B. Friehling, F.W. Poulsen, and M.A.J. Somers, Nucleation of iron nitrides during gaseous nitriding of iron; the effect of a preoxidation treatment. Z. Metallkd 92 (2001), pp. 589–595.
   Google Scholar
• L. Bellas, G. Castro, L. Mera, J.L. Mier, A. Garcia and A. Varela, Effect of carbonitriding in a salt bath by a QPQ scheme on stainless steel 321 microstructure and service properties. Met. Sci. Heat Treat 58 (2016), pp. 369–375. doi:10.1007/s11041-016-0019-3.
   Web of Science ®Google Scholar
• Y. Hong, C.L. Wu, and J.H. Chen, Precipitation of gamma ‘nitrides in N-saturated ferrite at high temperature and its effect on nitriding. J. Alloys Compd 792 (2019), pp. 818–827. doi:10.1016/j.jallcom.2019.04.099.
   Web of Science ®Google Scholar
• T. Christiansen and M.A.J. Somers, Avoiding ghost stress on reconstruction of stress- and composition-depth profiles from destructive X-ray diffraction depth profiling. Mater. Sci. Eng., A 424 (2006), pp. 181–189. doi:10.1016/j.msea.2006.03.007.
   Web of Science ®Google Scholar
• Y. Yang, X.Z. Dai, and X.R. Yang, First-principles analysis on the role of rare-earth doping in affecting nitrogen adsorption and diffusion at Fe surface towards clarified catalytic diffusion mechanism in nitriding. Acta Mater. 196 (2020), pp. 347–354. doi:10.1016/j.actamat.2020.06.020.
   Web of Science ®Google Scholar
• H.J. Spies, Corrosion behaviour of nitrided, nitrocarburised and carburised steels. Thermochem. Surf. Eng. Steels (2015), pp. 267–309. doi:10.1533/9780857096524.2.267.
   Google Scholar
• A. Raveh, A. Bussiba, and A. Bettelheim, Plasma-nitrided α-β Ti alloy: Layer characterization and mechanical properties modification. Surf. Coat. Technol 57 (1993), pp. 19–29. doi:10.1016/0257-8972(93)90332-I.
   Web of Science ®Google Scholar
• H.L. Xiang, G.X. Wu, D. Liu, H.T. Cao, and X.P. Dong, Effect of quench polish quench nitriding temperature on the microstructure and wear resistance of SAF2906 duplex stainless steel. Metals. (Basel) 9(8) (2019), pp. 848. doi:10.3390/met9080848.
   Web of Science ®Google Scholar
• Y. Wu and Q. Yan, First principles study on effect of lanthanum on nitrogen diffusion in ϵ-Fe_3N phase. Rare Met. 26 (2007), pp. 251–254.
   Web of Science ®Google Scholar
• Y. Li, Z. Wang, and L. Wang, Surface properties of nitrided layer on AISI 316L austenitic stainless steel produced by high temperature plasma nitriding in short time. Appl. Surf. Sci 298 (2014), pp. 243–250. doi:10.1016/j.apsusc.2014.01.177.
   Web of Science ®Google Scholar
• L.Z. Li, R.L. Liu, Q.L. Liu, Z.J. Wu, X.L. Meng, and Y.L. Fang, Effects of initial microstructure on the Low-temperature plasma nitriding of ferritic stainless steel. Coatings 12 (2022). doi:10.3390/coatings12101404.
   Web of Science ®Google Scholar
• W. Cai, F.N. Meng, X.Y. Gao, and J. Hu, Effect of QPQ nitriding time on wear and corrosion behavior of 45 carbon steel. Appl. Surf. Sci 261 (2012), pp. 411–414. doi:10.1016/j.apsusc.2012.08.024.
   Web of Science ®Google Scholar
• N. Ishikawa, T. Shiraga, and K. Sato, Effects of nitriding temperature on gas nitriding property of steels for nitriding. Iron Steel Inst 82 (1996), pp. 164–169. doi:10.2355/tetsutohagane1955.82.2_164.
   Web of Science ®Google Scholar
• M.F.C. Ordonez, C.L.G. Amorim, and I. Krindges, Microstructure and micro-abrasive wear of sintered yttria-containing 316L stainless steel treated by plasma nitriding. Surf. Coat. Technol. 374 (2019), pp. 700–712. doi:10.1016/j.surfcoat.2019.06.002.
   Web of Science ®Google Scholar
• C. Du, J. Zhang, L. Zhang, Y. Lian, and M.S. Fang, Acceleration effects of rare earths on salt bath nitriding: Diffusion kinetics and first-principles calculations. Surf. Eng 37 (2020), pp. 764–774. doi:10.1080/02670844.2020.1802545.
   Web of Science ®Google Scholar
• L.N. Tang and M.F. Yan, Microstructure and corrosion resistance of quenched AISI 4140 steel plasma nitrided and nitrocarburised with and without rare earths. Mater. Sci. Technol 29 (2013), pp. 610–615. doi:10.1179/1743284712Y.0000000190.
   Web of Science ®Google Scholar
• M.F. Yan and R.L. Liu, Martensitic stainless steel modified by plasma nitrocarburizing at conventional temperature with and without rare earths addition. Surf. Coat. Technol 205 (2010), pp. 345–349. doi:10.1016/j.surfcoat.2010.06.056.
   Web of Science ®Google Scholar