References
- Andrews, G., et al., 2004. The effect of ambient temperature on cold start urban traffic emissions for a real world SI car. SAE 2004-01-2903. Warrendale, PA, USA.
- Ashford, M., et al., 2003. An on-board distillation system to reduce cold-start hydrocarbon emissions. SAE 2003-01-3239. Warrendale, PA, USA.
- Carter, R., et al., 1998. Laboratory evaluation of ultra-short metal monolith catalyst. SAE 980672. Warrendale, PA, USA.
- Choi, M., 2000. The study of HC emission characteristics and combustion stability with spark timing retard at cold start in gasoline engine vehicle. SAE 2000-01-1082. Warrendale, PA, USA.
- Crane, E., Thring, R., Podnar, D., et al., 1997. Reduced cold-start emissions using a rapid exhaust port oxidation (REPO) in a spark-ignition engine. SAE 970264. Warrendale, PA, USA.
- Faltermeier, G., Pfalzqraf, B., Brück, R., et al., 1998. Design and optimization of a close-coupled catalyst concept for Audi 4-cylinder engines. SAE 980417. Warrendale, PA, USA.
- Henein, N., et al., 1995. Cycle-by-cycle analysis of HC emissions during cold start of gasoline engine. SAE 952402. Warrendale, PA, USA.
- Lafyatis, D., et al., 1998. Ambient temperature light-off aftertreatment system for meeting ULEV emission standards. SAE 980421. Warrendale, PA, USA.
- Morris, D., Twigg M., Collins, N., et al., 1999. Catalyst strategies for meeting super-ultra-low emissions—vehicle standards. SAE 1999-01-3067. Warrendale, PA, USA.
- Murphy, O., Andrews, C., and Kukreja, R., 1999. Electrically initiated chemically heated catalytic converter to reduce cold-start emissions from automobiles. SAE 1999-01-1233. Warrendale, PA, USA.
- Noda, N., Takahashi, A., and Mizuno, H., 1997. In-line hydrocarbon (HC) adsorber system for cold-start emissions. SAE 970266. Warrendale, PA, USA.
- Noda, N., Takahashi, A., Shibagaki, Y., and Mizuno, H., 1998. In-line hydrocarbon adsorber for cold-start emission. SAE 980423. Warrendale, PA, USA.
- Weilenmann, M., et al., 2005. Regulated and nonregulated diesel and gasoline cold start emissions at different temperature. Atmospheric Environment, 39 (13), 2433–2441. doi: 10.1016/j.atmosenv.2004.03.081
- Williams, J., Patil, M., and Hertl, W., 1996. By-pass hydrocarbon adsorber system for ULEV. SAE 960343. Warrendale, PA, USA.
- Yamazaki, H., Ueno, M., Endo, T., et al., 2004. Research on HC adsorption emission system. SAE 2004-01-1273. Warrendale, PA, USA.
- Zimmermann, F., Bright, J., Ren, W., and Imoehl, B., 1999. An internally heated tip injector to reduce HC emissions during cold-start. SAE 1999-01-0792. Warrendale, PA, USA.