Thermal performance analysis of plate heat exchanger with different configurations for the heat recovery system in buildings

References

• Ali, M. M., and S. Ramadhyani. 1992. “Experiments on Convective Heat Transfer in Corrugated Channels.” Experimental Heat Transfer 5 (3): 175–193. http://www.tandfonline.com/doi/abs/10.1080/08916159208946440#.UzSIeihXuc0 doi: 10.1080/08916159208946440
   Web of Science ®Google Scholar
• Dović, D., B. Palm, and S. Švaić. 2009. “Generalized Correlations for Predicting Heat Transfer and Pressure Drop in Plate Heat Exchanger Channels of Arbitrary Geometry.” International Journal of Heat and Mass Transfer 52 (19–20): 4553–4563. doi: 10.1016/j.ijheatmasstransfer.2009.03.074
   Web of Science ®Google Scholar
• Elshafei, E. A. M., M. Awad, E. El-Negiry, and A. G. Ali. 2008. “Heat Transfer and Pressure Loss in Narrow Channels with Corrugated Walls.” Second International Conference on Thermal Issues in Emerging Technologies, 2008. ThETA ‘08, Cairo, Egypt, 279–290.
   Google Scholar
• Fabbri, G. 2000. “Heat Transfer Optimization in Corrugated Wall Channels.” International Journal of Heat and Mass Transfer 43 (23): 4299–4310. doi: 10.1016/S0017-9310(00)00054-5
   Web of Science ®Google Scholar
• Fernández-Seara, J., R. Diz, F. J. Uhía, A. Dopazo, and J. M. Ferro. 2011. “Experimental Analysis of an Air-to-Air Heat Recovery Unit for Balanced Ventilation Systems in Residential Buildings.” Energy Conversion and Management 52 (1): 635–640. doi: 10.1016/j.enconman.2010.07.040
   Web of Science ®Google Scholar
• FLUENT, User's Guide 6.3, Fluent Inc., USA.
   Google Scholar
• Gradeck, M., B. Hoareau, and M. Lebouché. 2005. “Local Analysis of Heat Transfer Inside Corrugated Channel.” International Journal of Heat and Mass Transfer 48 (10): 1909–1915. doi: 10.1016/j.ijheatmasstransfer.2004.12.026
   Web of Science ®Google Scholar
• Heggs, P. J., P. Sandham, R. A. Hallam, and C. Walton. 1997. “Local Transfer Coefficients in Corrugated Plate Heat Exchanger Channels.” Chemical Engineering Research and Design 75 (7): 641–645. doi: 10.1205/026387697524254
   Web of Science ®Google Scholar
• Hwang, S. D., I. H. Jang, and H. H. Cho. 2006. “Experimental Study on Flow and Local Heat/Mass Transfer Characteristics Inside Corrugated Duct. International Journal of Heat and Fluid Flow 27 (1): 21–32. doi: 10.1016/j.ijheatfluidflow.2005.07.001
   Web of Science ®Google Scholar
• Launder, B. E., and D. B. Spalding. 1974. “The Numerical Computation of Turbulent Flows.” Computer Methods in Applied Mechanics and Engineering 3 (2): 269–289. doi: 10.1016/0045-7825(74)90029-2
   Google Scholar
• Li, Q., G. Flamant, X. Yuan, P. Neveu, and L. Luo. 2011. “Compact Heat Exchangers: A Review and Future Applications for a New Generation of High Temperature Solar Receivers.” Renewable and Sustainable Energy Reviews 15 (9): 4855–4875. doi: 10.1016/j.rser.2011.07.066
   Web of Science ®Google Scholar
• Manz, H., H. Huber, and D. Helfenfinger. 2001. “Impact of Air Leakages and Short Circuits in Ventilation Units with Heat Recovery on Ventilation Efficiency and Energy Requirements for Heating.” Energy Buildings 33 (2): 133–139. doi: 10.1016/S0378-7788(00)00077-3
   Web of Science ®Google Scholar
• Mohammed, H. A., A. K. Abbas, and J. M. Sheriff. 2013a. “Influence of Geometrical Parameters and Forced Convective Heat Transfer in Transversely Corrugated Circular Tubes.” International Communications in Heat and Mass Transfer 44: 116–126. doi: 10.1016/j.icheatmasstransfer.2013.02.005
   Web of Science ®Google Scholar
• Mohammed, H. A., A. M. Abed, and M. A. Wahid. 2013b. “The Effects of Geometrical Parameters of a Corrugated Channel with in Out-of-Phase Arrangement.” International Communications in Heat and Mass Transfer 40: 47–57. doi: 10.1016/j.icheatmasstransfer.2012.10.022
   Web of Science ®Google Scholar
• Naphon, P. 2007. “Laminar Convective Heat Transfer and Pressure Drop in the Corrugated Channels.” International Communications in Heat and Mass Transfer 34 (1): 62–71. doi: 10.1016/j.icheatmasstransfer.2006.09.003
   Web of Science ®Google Scholar
• Naphon, P. 2008. “Effect of Corrugated Plates in an In-Phase Arrangement on the Heat Transfer and Flow Developments.” Internatinal Journal of Heat and Mass Transfer 51 (15–16): 3963–3971. doi: 10.1016/j.ijheatmasstransfer.2007.11.050
   Web of Science ®Google Scholar
• Naphon P. 2009. “Effect of Wavy Plate Geometry Configurations on the Temperature and Flow Distributions.” International Communications in Heat and Mass Transfer 36 (9): 942–946. doi: 10.1016/j.icheatmasstransfer.2009.05.007
   Web of Science ®Google Scholar
• Naphon P. 2010. “Study on the Heat-Transfer Characteristics and Pressure Drop in Channels with Arc-Shaped Wavy Plates.” Journal of Engineering Physics and Thermophysics 3 (5): 1061–1069.
   Google Scholar
• Oosthuizen, P. H., and D. Nayler. 1999. An Introduction to Convective Heat Transfer Analysis. New York: WCB/McGraw-Hill.
   Google Scholar
• Shah, R. K., and D. P. Sekulić. 2003. Fundamentals of Heat Exchanger Design, 9–39. New York: John Wiley & Sons.
   Google Scholar
• Sparrow, E. M. 1977. “Heat/Mass Transfer Characteristics for Flow in a Corrugated Wall Channel.” Journal of Heat Transfer 99 (2): 187–195. doi: 10.1115/1.3450667
   Web of Science ®Google Scholar
• Sui, Y., C. J. Teo, P. S. Lee, Y. T. Chew, and C. Shu. 2010. “Fluid Flow and Heat Transfer in Wavy Microchannels.” International Journal of Heat and Mass Transfer 53: 2760–2772. doi: 10.1016/j.ijheatmasstransfer.2010.02.022
   Web of Science ®Google Scholar
• Sunden, B., and I. Karlsson. 1991. “Enhancement of Heat Transfer in Rotary Heat Exchangers by Streamwise-Corrugated Flow Channels.” Experimental Thermal and Fluid Science 4 (3): 305–316. doi: 10.1016/0894-1777(91)90048-V
   Web of Science ®Google Scholar
• Versteeg, H. K., and W. Malalasekera. 1995. An Introduction to Computational Fluid Dynamics: The Finite Volume Method. Harlow: Longman Group.
   Google Scholar
• Yin, J., G. Yang, G. Hao, and P. Lv. 2011. “Numerical Investigation of Flow and Heat Transfer in Corrugated Sinusoidal Wavy Channel.” Power and Energy Engineering Conference (APPEEC), 2011, Asia-Pacific, Bangkok, hailand, 1–5.
   Google Scholar
• Yin, J., G. Yang, and Y. Li. 2012. “The Effects of Wavy Plate Phase Shift on Flow and Heat Transfer Characteristics in Corrugated Channel.” Energy Procedia 14: 1566–1573. doi: 10.1016/j.egypro.2011.12.1134
   Google Scholar
• Yuan, Z., W. Tao, and Q. Wang. 1998. “Numerical Prediction for Laminar Forced Convection Heat Transfer in Parallel-plate Channels with Stream Wise-Periodic ROD Disturbances.” International Journal for Numerical Methods in Fluids 28 (9): 1371–1387. doi: 10.1002/(SICI)1097-0363(19981215)28:9<1371::AID-FLD774>3.0.CO;2-A
   Web of Science ®Google Scholar
• Zhang, L., and Z. Chen. 2011. “Convective Heat Transfer in Cross-Corrugated Triangular Ducts under Uniform Heat Flux Boundary Conditions.” International Journal of Heat and Mass Transfer 54 (1–3): 597–605. doi: 10.1016/j.ijheatmasstransfer.2010.09.010
   Web of Science ®Google Scholar
• Zhang, J., J. Kundu, and R. M. Manglik. 2004. “Effect of Fin Waviness and Spacing on the Lateral Vortex Structure and Laminar Heat Transfer in Wavy-Plate-Fin Cores.” International Journal of Heat and Mass Transfer 47 (8–9): 1719–1730. doi: 10.1016/j.ijheatmasstransfer.2003.10.006
   Web of Science ®Google Scholar